Development of a method for the identification and engineering design of endless fiber reinforced composites

The main objective of this paper is to introduce a novel method to develop a multi-material body-in-white concept with composite material or hybrid material system. A new method based on the work of Durst (2008) is presented, which works basically in three steps. In the first step, the anisotropy of the components is analyzed to pre-evaluate the potential of FRP-suitable parts. In the second step, the predominating orientation of every finite element is determined and clustered to get a first impression of an appropriate laminate architecture. In the last step, a suitable design with a preliminary stacking sequence is calculated. To prove the feasibility of this method, it has been applied to simple flat coupons and a body-in-white component to show that the method leads to reasonable results.     

High downforce race car vertical dynamics: aerodynamic index

Race car performance is strongly affected by aerodynamics. Due to downforce generated by the vehicle floor (i.e. diffuser), vehicle ride heights are key parameters to improve performance, and the coupling of aerodynamics and suspension is one of the key points of race car setting. This work focuses on the suspension and aerodynamic coupling from the vertical dynamics point of view. Besides road holding performance, for race cars, aerodynamic performance and stability are major factors. Downforce decreases laptime (the main performance target) but pitch instability is a non-desired effect that can happen in high downforce race cars. A new vertical dynamic performance index is proposed through the use of simulation to improve aerodynamic performance and understand the pitch instability phenomenon. This new index uses all relevant vehicle nonlinearities related to vertical dynamics and can handle a specific track profile and vehicle speed range, allowing the analysis be conducted according to a circuit specification. A previously validated Formula 3 car model was used as an example.     

凸型平带导向轮的应用

针对起重皮带、传送带横向两端面磨损、破裂问题,提出一种新型皮带导向方法,该方法通过将导向轮皮带接触面设计为曲面,可自动将皮带居中导向,从而消除皮带端面与导向轮边摩擦。该方案设计巧妙,成本低,杜绝了皮带异常磨损,高效地保证了平带运行可靠性及安全性,可广泛应用于国内外各行业的起吊装置、传送装置。     

LM-CDBN超高层变形预测模型的构建与应用

为提高超高层建筑变形预测精度，对附有条件的深度信念网络（conditional deep belief network，CDBN）模型中权值及阈值调整方法进行了改进，使用LM （Levenberg-Marquardt）算法作为新的模型定权机制，构建了LM-CDBN网络模型；将构建的LM-CDBN超高层变形预测模型应用于一座298 m超高层建筑中；然后用训练误差、预测值拟合度、预测结果稳定性组成的综合评价体系对模型进行了评价；最后，将LM-CDBN模型分别与深度信念模型（deep belief network，DBN）、极限学习机（extreme learning machine，ELM）、基于无迹卡尔曼滤波的支持回归向量机（unscented Kalman filter-support vector regression，UKF-SVR）进行了预测结果对比. 结果表明:在超高层建筑的变形预测中，相比DBN、ELM和UKF-SVR，LM-CDBN预测精度分别提升了32%、55%及24%，模型的信息提取稳定性及处理时变系统非线性问题的泛化能力得到了提高.      

A cluster analysis of cyclists in Europe: common patterns,behaviours, and attitudes

Transportation - This study uses cluster analysis on a sample of regular cyclists from six European countries (the U.K., the Netherlands, Sweden, Hungary, Italy, and Spain) to shed light on common...     

Factors contributing to bicycle–motorised vehicle collisions: a systematic literature review

Bicycle–motorised vehicle (BMV) collisions account for the majority of the recorded bicyclists’ fatalities and serious injuries. This systematic review intends to examine the main factors contributing to BMV collisions. We performed a comprehensive literature review on Scopus, TRID, ProQuest, and Web of Science databases. Fifty-nine English-language peer-reviewed articles met the eligibility criteria and were included in the final analysis. The main factors contributing to BMV collisions identified were classified in accordance with a recently published conceptual framework for road safety. The majority of studies have identified factors related to road users’ behaviour (59.3%) and infrastructure characteristics (57.6%). A minority of studies identified variables related to exposure (40.7%) and vehicles (15.3%) as contributor factors to BMV collisions. A small but significant proportion of studies (20.3%) provided evidence that environmental factors may also play a role, although to a lesser extent, in determining BMV collisions. In addition to the three factors comprised in the applied conceptual framework for road safety, we identified environmental conditions as a category of factors contributing to BMV collisions.     

Elderly travel frequencies and transport mode choices in Greater Rotterdam,the Netherlands

Demographic ageing is a key societal challenge in Europe as well as in many other western and non-western societies. A crucial dimension concerns elderly daily mobility patterns. While still partaking fewer and shorter trips than younger generations, today’s elderly have been found increasingly (auto)mobile. Although the elderly benefit from the independence, freedom of movement, and social inclusion, concerns may rise regarding the environmental and accessibility impacts of this induced mobility. The present study adds to the expanding literature on elderly mobility, an integrated analysis of the effects of socio-demographic, health, trip, spatial and weather attributes on elderly mobility. Utilizing travel diary data for Greater Rotterdam, The Netherlands, trip frequencies and transport mode choices of the elderly are analysed by means of zero-inflated negative binomial models as well as multinomial logit regression models, and contrasted to the non-elderly subpopulation to explore (dis)similarities. While the results show common determinants, the models also highlight important differences in the magnitude of the estimated coefficients and factors only influencing transport patterns for the elderly. Embedded in the context of an aging population, the empirical findings assist policy-makers and planners in several respects: For transportation plans and programs it is critical to recognize mobility needs of the elderly. As the seniors are becoming increasingly automobile, the results call for strategies to encourage older people to use more physically active and environmentally friendly transport modes such as public transport, walking and cycling.     

A study of tour-based mode choice based on a Support Vector Machine classifier

A new approach in recognizing travel mode choice patterns is proposed, based on the Support Vector Machine classification technique. The tour-based travel demand dataset that is analysed is for New York State, derived from the 2009 U.S. National Household Travel Survey. The main features characterizing each tour are the means used, travel-related variables and socioeconomic aspects. Results obtained demonstrate the ability to predict to some extent, in real settings where car use dominates, which tours are likely to be made by public transport or non-motorized means. Moreover, the flexibility of the technique allows assessing the predictive power of each feature according to the combination of travel means used in different tours. Potential applications range from activity-based travel choice simulators to search engines supporting personalized travel planners – in general, whenever ‘best guesses’ on mode choice patterns have to be made quickly on large amounts of data prejudicing the possibility of setting up a statistical model.     

Transit network design for small-medium size cities

This paper proposes a novel heuristic to solve the network design problem for public transport in small-medium size cities. Such cities can be defined as those with a diameter of a few kilometers with up to a few hundred thousand residents. These urban centers present a specific spatial configuration affecting the land use and mobility system. Transportation demand is widespread in origin and concentrated in a small number of attraction points close to each other. This particular structure of demand (‘many-to-few’) suggests the need for specific methodologies for the design of a transit system at a network level. In this paper, such design methodologies are defined in terms of models and solution procedures and tested on a selected case study. The solution methods show promising results. The key variables of the model are the routes and their frequencies. The constraints of the problem affect the overall demand to be served, the quality of the proposed service (transfer, load factors) and the definition of routes.