Power network parameter estimation method based on data mining technology

The parameter values which actually change with the circumstances, weather and load level etc.produce great effect to the result of state estimation. A new parameter estimation method based on data mining technology was proposed. The clustering method was used to classify the historical data in supervisory control and data acquisition (SCADA) database as several types. The data processing technology was impliedto treat the isolated point, missing data and yawp data in samples for classified groups. The measurement data which belong to each classification were introduced to the linear regression equation in order to gain the regression coefficient and actual parameters by the least square method. A practical system demonstrates the high correctness, reliability and strong practicability of the proposed method.     

彩色多普勒超声在动态监测移植肝及其并发症中的应用

目的探讨彩色多普勒超声在动态监测肝移植术后血流动力学变化及并发症诊治中的应用价值。方法回顾我中心107例原位肝移植术后应用彩色多普勒超声资料,汇总后行统计学分析。结果肝移植术后早期门脉流速较正常对照组升高,而肝动脉流速降低,后逐渐恢复正常。107例中发现肝动脉血栓形成2例(1.87%),肝动脉狭窄5例(4.67%),门脉血栓形成3例(2.80%),肿瘤复发7例(6.54%),诊断为急性排斥反应18例次(16.82%),慢性排斥反应10例次(9.34%),胸腔积液105例(98.13%),腹腔积液65例(60.74%),假性动脉瘤1例,胰漏1例,胆道感染4例(3.74%),胆道狭窄4例(3.74%),胆漏5例(4.67%),胆总管结石1例。结论彩色多普勒超声在动态监测肝移植术后血流动力学变化及并发症诊治中具有重要的临床意义。     

关于船舶UPS的容量估算

伴随着不间断电源(UPS)技术在船舶以及海洋工程项目中的使用日益广泛,人们对不间断电源技术的了解也日益增加。该文通过实船案例结合理论知识详细介绍UPS的工作方式以及UPS的容量确定、蓄电池容量确认等内容。     

基于LabVIEW的“海院1号”波浪发电平台浮筒取能效率数据采集系统设计

浮筒取能效率测试是波浪发电平台研究的重要组成部分。传统的测试系统不但测量精度低,而且自动化程度低、操作复杂。为此,该文基于“海院1号”波浪发电平台,采用虚拟仪器LabVIEW软件开发了浮筒取能效率数据采集系统。文中介绍了“海院1号”波浪发电平台及其浮筒,进行了测试系统的设计,实现了浮筒取能效率测试的数据采集、数据管理、曲线拟合及绘制、生成报表、信号分析以及数据处理等工程。对实际运行效果进行分析,结果表明该系统具有精度高、运行稳定可靠、自动化程度高、人机界面友好以及操作简单等特点,具有重要的工程实践意义。     

基于速度系数法的离心泵叶轮优化设计

离心泵在水力设计中应保证达到设计参数的要求,有较高的水力效率和良好的汽蚀性能.以离心泵水力设计的速度系数法为前提,应用机械优化设计的方法,以离心泵的效率和汽蚀性能为优化目标建立了离心泵叶轮的优化设计模型,并通过实例计算证明了该方法是切实可行的.     

清管器在输油管道中的运动规律研究

在分析清管物理模型的基础上,建立了清管器前段塞流动的特征参数计算模型、动态数学模型以及相应的数值计算方法,并进行了数值模拟。利用数学模拟方法可以计算清管过程中管线的压力分布,利用压力分布可以跟踪清管球在管线内的运行,这为混输管路的运行管理提供了理论依据。     

车辆电磁制动方案刍议

结合机车车辆制动系统的运行情况,对电磁制动系统进行了初步探讨.提出了两种电磁制动方案:单电磁铁失电制动和双电磁铁得电制动.方案能够初步解决电磁制动系统中的一些技术难点,如减轻闸瓦间隙消除过程中闸瓦与车轮间的机械碰撞、电磁力的计算与控制、制动力的放大与传递等.     

Subjective well-being and travel: retrospect and prospect

Although the improvement of well-being is often an implicitly-assumed goal of many, if not most, public policies, the study of subjective well-being (SWB) and travel has so far been confined to a relatively small segment of the travel behavior community. Accordingly, one main purpose of this paper is to introduce a larger share of the community to some fundamental SWB-related concepts and their application in transportation research, with the goal of attracting others to this rewarding area of study. At the same time, however, I also hope to offer some useful reflections to those already working in this field. After discussing some basic issues of terminology and measurement of SWB, I present from the literature four conceptual models relating travel and subjective well-being. Following one of those models, I review five ways in which travel can influence well-being. I conclude by examining some challenges associated with assessing the impacts of travel on well-being, as well as challenges associated with applying what we learn to policy.

     

Virtual prototype simulation on underwater hydraulic impingement shovel

The virtual prototype technology is applied to the design of the hydraulic impingement shovel, which is to increase the reliability of the design. The work principle of hydraulic impingement shovel is expatiated, and its dynamic equations are established. The 3D model of virtual prototype is built by PRO/E. Then the couple between the mechanical body of prototype and the hydraulic system is completed by virtue of ADAMS. Finally, the simulation is made on the virtual prototype. The simulation results show that the design of underwater hydraulic impingement shovel is rational. The virtual prototype technology could lay sound foundation of successful manufacturing of physical prototype for the first time and offer highly effective and feasible means for the design and production of underwater equipments.     

Experimental study on the width of the turbulent area around bridge pier

At present, the method of calculating the turbulent flow width around the bridge pier is not given in the "Standard for Inland River Navigation" (GB50139-2004) in China, and the bridge designer usually increases the bridge span in order to ensure the navigation safety, which increases both of the structural design difficulty and the project investments. Therefore, it is extremely essential to give a research on the turbulent flow width around the bridge pier. Through the experiments of the fixed bed and the mobile bed, the factors influencing the turbulent flow width around the bridge pier have been analyzed, such as the approaching flow speed, the water depth, the angles between the bridge pier and the flow direction, the sizes of bridge pier, the shapes of the bridge pier, and the scouring around the bridge pier, etc. Through applying the dimension analytic method to the measured data, the formula of calculating the turbulent flow width around the bridge pier is then inferred.