Multi-try counter-meshing gears discrimination device based on MEMS technology

A multi-try counter-meshing gears (CMG) discrimination device based on micro electromechani-cal system (MEMS) technology was designed for some specified information fields. The discrimination deviceconsists of two groups of metal CMG, two pawl/ratchet mechanisms, two driving micromotors and two re-setting micromotors, which make the CMG withdraw by raising the pawls. The energy-coupling element isa photoelectric sensor with a circular plate which is notched. Micromotor is fabricated using the ultravioletLiGA (UV-LiGA) fabrication process and precision mechanical engineering. The discrimination device has thefunction which can automatically reset, with the correct resetting code, it can be tried another times.     

Reliability analysis of repairable systems using stochastic point processes

In order to analyze the failure data from repairable systems, the homogeneous Poisson process(HPP) is usually used. In general, HPP cannot be applied to analyze the entire life cycle of a complex, re-pairable system because the rate of occurrence of failures (ROCOF) of the system changes over time rather thanremains stable. However, from a practical point of view, it is always preferred to apply the simplest methodto address problems and to obtain useful practical results. Therefore, we attempted to use the HPP model toanalyze the failure data from real repairable systems. A graphic method and the Laplace test were also usedin the analysis. Results of numerical applications show that the HPP model may be a useful tool for the entirelife cycle of repairable systems.     

Dynamic investigation on composite flexible multi-body system considering thermal effect

The dynamic performance of composite flexible multi-body system under the simultaneous action of thermal fields and driving constraint is analyzed. Based on strain-displacement relation of the Mindlin plate theory which includes transverse shear deformation, and considering thermal effect, variation equations of laminated plate are derived by the principle of virtual work. The finite element method is used for discretization. According to kinematics constraint relation, dynamic equations for spatial slider-crank system are established. Simulation results show that spatial deformation (torsion deformation) appears in the multi-layered composite slider-crank mechanism which is simulated with planar motions. Furthermore, the influence of coupling between thermal expansion and flexible deformations of non-symmetrical composite plates on the large overall motion under the uniform temperature field is investigated. Finally, significant change in constraint force due to the spatial deformation is shown.     

Novel mesh technique and its application in the wind field simulation for flexible spatial structure

In this paper, novel mesh techniques are proposed for wind field simulation of flexible spatial structure. For mesh generation, an interpolation strategy is presented to obtain a mesh system with variable density. Two spatial structure examples are used to examine the efficiency and applicability of this technique. Then based on the structured mesh system generated by the technique, the mesh nodal coordinates are updated to adapt the moving boundary conditions by means of the mapping interpolation functions and some examples are given to verify the effectiveness. Furthermore, the constrained counterforce distribution technique and projection interpolation strategy are developed to implement the data exchange on the interaction surface of wind and structure. Finally, the computational accuracy is numerically validated.     

Numerical analysis and experimental study of the effect of workpiece thickness on flow field in laser cutting

Based on Navier-Stokes equation and renormalization group (RNG) onflow model, the 3D symmetrical impinging jet model of laser cutting is established by adopting a taper nozzle and a convergence nozzle. Numerical simulation of gas flow in laser cutting is used to investigate the effect of workpiece thickness on flow field of assist gas in cutting slot. The isolines of static pressure as well as the distributions of static pressure and velocity are analyzed in details with different workpiece thickness, and the trend of dynamics characteristics of gas jet is shown in the study. For taper nozzles and convergence nozzles, the dynamic structure of assist gas being close to the lower surface of workpiece is exacerbated while the cutting quality and cutting efficiency become worse with the increasing of workpiece thickness. The parallel degree between assist gas and the axis of convergence nozzle is better than that of taper nozzle after the gas goes out of the nozzles. Two typical subsonic nozzles are designed for the cutting experiment at the end of the paper.     

Mechanical behaviors of the foot after individual releases of plantar fascia and ligaments during the balanced standing

To quantify mechanical effects of plantar fascia and ligaments on the arch structure, a 3D finite element model of the foot was created to simulate the balanced standing posture. Four cases after individual releases of plantar fascia, spring ligament, long and short plantar ligaments were simulated respectively to compare their consequences to the predictions of the intact structure. It was founded that the foot arch didn’t collapse obviously after any individual release of these structures. As plantar fascia was released, tensions of plantar ligaments were largely increased. Long and short plantar ligaments performed mutual compensation functions.     

Mesh motion approach based on spring analogy method for unstructured meshes

Mesh motion strategy is one of the key points in many fluid-structure interaction problems. One popular technique used to solve this problem is known as the spring analogy method. In this paper a new mesh update approach based on the spring analogy method is presented for the effective treatment of mesh moving boundary problems. The proposed mesh update technique is developed to avoid the generation of squashed invalid elements and maintain mesh quality by considering each element shape and grid scale to th...     

H_∞ Autopilot Design for Autonomous Underwater Vehicles

The design approach of H∞ autopilot for autonomous underwater vehicles (AUVs) is proposed. Comprised by the three sub-controllers,i.e. speed,heading and depth controllers,the designed autopilot has advantage over existing H∞ control of AUVs. The overshoot in speed,heading and depth control systems under step commands is restricted by refining the weighting function for robust stability. The dynamic performance of heading and depth control systems is improved by feeding back yaw rate and pitch angle,respecti...     

Fully secure revocable attribute-based encryption

Distributed information systems require complex access control which depends upon attributes of protected data and access policies. Traditionally, to enforce the access control, a file server is used to store all data and act as a reference to check the user. Apparently, the drawback of this system is that the security is based on the file server and the data are stored in plaintext. Attribute-based encryption (ABE) is introduced first by Sahai and Waters and can enable an access control mechanism over encrypted data by specifying the users’ attributes. According to this mechanism, even though the file server is compromised, we can still keep the security of the data. Besides the access control, user may be deprived of the ability in some situation, for example paying TV. More previous ABE constructions are proven secure in the selective model of security that attacker must announce the target he intends to attack before seeing the public parameters. And few of previous ABE constructions realize revocation of the users’ key. This paper presents an ABE scheme that supports revocation and has full security in adaptive model. We adapt the dual system encryption technique recently introduced by Waters to ABE to realize full security.     

Research on Spatially Adaptive High-Order Total Variation Model for Weak Fluorescence Image Restoration

Photoacoustic imaging acquires the absorption contrast of biological tissue with ultrasound resolution. It has been broadly investigated in biomedicine for animal and clinical studies. Recently, a micro-electro-mechanical system (MEMS) scanner has been utilized in photoacoustic imaging systems to enhance their performance and extend the realm of applications. The review provides a recap of recent developments in photoacoustic imaging using MEMS scanner, from instrumentation to applications. The topics include the design of MEMS scanner, its use in photoacoustic microscopy, miniature imaging probes, development of dual-modality systems, as well as cutting-edge bio-imaging studies.