Experimental study on the nonlinear pressure acting on a high-speed vessel in regular waves

It is well known that the hydrodynamic responses of a high-speed vessel traveling in regular head waves of even moderate wave height can show significant nonlinear behavior, and so linear statistical techniques become insufficient for predicting the statistics of responses in irregular waves. On the other hand, it has been shown that an approximate third-order Volterra model is applicable to handling the statistics of some nonlinear seakeeping problems, such as motions and vertical hull girder loads. In the present study, the focus is on the nonlinear behavior of the pressure responses of the hull surface, especially on the pressures acting on alternately wet and dry areas near the waterline and on the bow zone with high deadrise angles that may be subject to slight impact and water pile-up effects. To clarify the validity of applying Volterra modeling to this problem, a series of experiments in regular and irregular head waves were carried out, and approximate third-order and fifth-order Volterra models with the proposed algorithm for finding frequency response functions (FRFs) were applied as a means of validation. In the present article, the first part of the validation was performed using experimental data in regular waves. It was confirmed that the third-order Volterra model has adequate accuracy to simulate deterministically the variation of pressure responses in regular waves of different wave steepness up to a wave amplitude to wavelength ratio of 0.01 even for the highly nonlinear pressures acting on the above-mentioned areas of the hull surface.     

Course-keeping control of underactuated hovercraft

The course-keeping control of underactuated hovercraft with two aft propellers was considered. The control of the heading error and cross-track error was accomplished by the yaw torque merely in this case. The hovercraft dynamic model is nonlinear and underactuated. At first the Controllability of course-keeping control for hovercraft was proved, then a course-keeping control law was derived that keeps hovercraft heading constant as well as minimizes the lateral movement of hovercraft. The proposed law guarantees heading error and sway error all converge to zero exponentially. Simulation tests were carried out to illustrate the effectiveness of the proposed control law. For further research, the disturbance influence would be considered in the dynamic equations.     

An approach to estimating the hull girder response of a ship due to springing

This article describes an estimation method for the hull girder response of a ship due to springing. The linear and nonlinear springing effects on the hull girder are evaluated. Previous studies on the springing response focused mainly on the symmetric response, or vertical response. In this article, however, the springing analysis is extended to asymmetric responses, or horizontal and torsional responses. The Timoshenko beam model was used to calculate the hull girder response and the quadratic strip method was employed to calculate hydrodynamic forces and moments on the hull. To remove irregular frequencies, a rigid lid was adopted on the hull free surface level and hydrodynamic coefficients were interpolated for asymptotic values. Applications to two ships for the symmetric and asymmetric responses were carried out and the effect of springing responses is also discussed.     

Factors influencing support for local transportation sales tax measures

Sales tax measures passed at the local level and dedicated to transportation projects have become increasingly popular in the United States. While revenues from fuel taxes stagnate, growth of local transportation sales taxes (LTSTs), most approved in local elections, has led to a gradual shift of the financial base for transportation projects away from user fees and toward broader-based taxes. In this study, the relationship between voter support and the social, political, and geographic characteristics of the voters is explored. Using precinct-level voting data and census demographic data for three local transportation sales tax elections in Sonoma County, in the San Francisco Metropolitan area of California, regression models were constructed to analyze this relationship. In addition, the relationship between the outcomes of the three measures was explored to better understand which transportation projects might have garnered more support for the successful measure. It was found that the closer voters lived to the transportation projects to be funded, the greater their support. Higher incomes were also positively related to support, controlling for other variables. Political leanings were found to affect support, with the direction of the effect dependent upon the project list in each measure’s expenditure plan. Finally, it appears that the latest measure, which passed successfully, benefited greatly from its multi-modal expenditure plan.     

Integrated Control Methodologies for Road Vehicles

Summary This paper considers the scope, methodologies and architectures for the design and development of interacting control systems in road vehicles. The increasing use of electronic controls leads inevitably to an increase in overall system complexity. Given the time and economic constraints of the modern automotive industry, it is not feasible to synthesise and validate the full set of vehicle controls in the form of a unified and centralized controller. On the other hand a fully decentralized approach to control system development and operation will induce performance limitations from un-modelled or unexpected interactions; at worst, such interactions can cause instability and loss of function. There is now increasing pressure to achieve control coordination whilst maintaining a modular approach to the overall system design. With this in mind, the paper provides a framework to review current practice in integrated vehicle control, assesses recent developments in control integration methodologies that are most relevant to the vehicle application, and formulates an enhanced multi-layer architecture that includes explicit coordination functionality. Overall emphasis is placed on the role of control system architecture, the resulting flow of control information and the implications for control system design. An example from handling dynamics is presented, demonstrating the viability of new and flexible approaches. In conclusion a number of outstanding research problems are highlighted.     

Multigrid fictitious boundary method for incompressible viscous flows around moving airfoils

In this paper, an efficient multigrid fictitious boundary method (MFBM) coupled with the FEM solver package FEATFLOW was used for the detailed simulation of incompressible viscous flows around one or more moving NACA0012 airfoils. The calculations were carried on a fixed multigrid finite element mesh on which fluid equations were satisfied everywhere, and the airfoils were allowed to move freely through the mesh. The MFBM was employed to treat interactions between the fluid and the airfoils. The motion of the airfoils was modeled by Newton-Euler equations. Numerical results of experiments verify that this method provides an efficient way to simulate incompressible viscous flows around moving airfoils.     

Application of H∞ control in rudder/flap vector robust control of a ship＇s course

Given the uncertainty of parameters and the random nature of disturbances that effect a ships course, a robust course controller should be designed on the basis of rudder/flap vector control. This paper analyzes system uncertainty, and the choice of weighting functions is also discussed. When sea waves operate on a ship, the energy-concentrating frequency varies with the angle of encounter. For different angles of encounter, different weighting functions are designed. For the pole of a nominal model existing in an imaginary axis, the bilinear-transform method is used. The ＂2-Riccati＂ equation is adopted to solve the H∞ controller. A system simulation is given, and the results show that, compared with a PID controller, this system has higher course precision and more robust performance. This research has significant engineering value.     

Structural safety assessment of a pontoon-type VLFS considering damage to the breakwater

 A structural safety assessment of a pontoon-type very large floating structure (VLFS) surrounded by a gravity-type breakwater was carried out for extreme wave conditions by considering the damage to the breakwater. Bending and shear collapses are considered to be a failure mode of the floating structure, while overturning damages the breakwater. The probability of the breakwater overturning, and the transmitted wave height before and after damage to the breakwater, are evaluated using design formulae for port and harbor facilities in Japan. The ultimate bending and shear strengths of the floating structure are calculated by the idealized structural unit method (ISUM) and FEM, respectively. The calculated failure probability for the floating structure is compared with the specified target safety level. It was found that the floating structure under consideration is most likely to fail by bending in transverse waves, and that the corresponding failure probability satisfies the target level. Received: September 12, 2002 / Accepted: October 4, 2002 Acknowledgment. The authors are grateful to Dr. Shigeo Ohmatsu, National Maritime Research Institute, Japan, for allowing us to use the program of hydroelastic response analysis. Address correspondence to: M. Fujikubo (e-mail: fujikubo@naoe.hiroshima-u.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Arthit Jpn 2002;190:337–345)