The structure of dissipation in the western Irish Sea front

We report on an intensive campaign in the summer of 2006 to observe turbulent energy dissipation in the vicinity of a tidal mixing front which separates well mixed and seasonally stratified regimes in the western Irish Sea. The rate of turbulent dissipation ε was observed on a section across the front by a combination of vertical profiles with the FLY dissipation profiler and horizontal profiles by shear sensors mounted on an AUV (Autosub). Mean flow conditions and stratification were obtained from a bed mounted ADCP and a vertical chain of thermistors on a mooring. During an Autosub mission of 60 h, the vehicle, moving at a speed of ~ 1.2 m s^− 1, completed 10 useable frontal crossings between end points which were allowed to move with the mean flow. The results were combined with parallel measurements of the vertical profile of ε which were made using FLY for periods of up to 13 h at positions along the Autosub track. The two data sets, which show a satisfactory degree of consistency, were combined to elucidate the space–time variation of dissipation in the frontal zone. Using harmonic analysis, the spatial structure of dissipation was separated from the strong time dependent signal at the M₄ tidal frequency to yield a picture of the cross-frontal distribution of energy dissipation. A complementary picture of the frontal velocity field was obtained from a moored ADCP and estimates of the mean velocity derived from the thermal wind using the observed density distribution. which indicated the presence of a strong (0.2 m s^− 1) jet-like flow in the high gradient region of the front. Under neap tidal conditions, mean dissipation varied across the section by 3 orders of magnitude exceeding 10^− 2 W m^− 3 near the seabed in the mixed regime and decreasing to 10^− 5 W m^− 3. in the strongly stratified interior regime. The spatial pattern of dissipation is consistent in general form with the predictions of models of tidal mixing and does not reflect any strong influence by the frontal jet.     

The relevance of international transport costs on food prices: Endogenous and exogenous effects

The paper addresses the problem of transport costs and their influence on food prices for South American imports. While transport does not seem to be in the focus of existing analyses, its impact on food prices might be underestimated and even closely linked to the development of commonly mentioned drivers of food prices. Since transport price formation is a function of demand and supply, drivers of food prices are also expected to impact on transport prices. The authors argue that a number of relevant factors that drive transport costs - and in consequence food prices - can be influenced by policy makers. Based on empirical analysis, the authors explain the functioning of the determinants of transport costs in the segment of international shipping, trying to describe their exogenous and endogenous components. These results are discussed in reference to policy development in the region.     

Unsteady finite-depth effects during resistance tests on a ship model in a towing tank

This paper covers an extension of the study of Doctors et al. (J Ship Res 52(4):263–273, 2008) on oscillations in wave resistance during the constant-velocity phase of a towing-tank resistance test on a ship model to the case of relatively shallow water. We demonstrate here that the unsteady effects are very prominent and that it is essentially impossible to achieve a steady-state resistance curve in a towing tank of typical proportions for a water-depth-to-model-length ratio of 0.25. This statement is particularly true in the speed region near a depth Froude number of unity. However, on the positive side, we show here that an application of unsteady linearized wave-resistance theory provides an excellent prediction of the measured total resistance, when one accounts for the form factor in the usual manner. Finally, a simple application of the results to the planning and analysis of towing-tank tests is presented.     

Influence of the slice position on chloride migration tests for concrete in marine conditions

Chloride migration tests are used to measure the concrete capacity to inhibit chloride attack. Many researchers carry out this test in a slice of concrete extracted from the central part of cylindrical specimens, discarding about 75% of the concrete used to mold the specimens. This fact generated the question: would it be possible to extract more slices from a same specimen without losing the confidence in the results? The main purpose of this work is to answer this question. Moreover, another aim of this study was to show the difference of chloride penetration between finished faces and the formwork surfaces of concrete beams and slabs. The results indicated that it is possible to use more slices of a single specimen for a chloride migration test. Moreover, it was demonstrated that there is a significant difference of chloride penetration between the finished surface and the formwork surface of the specimens.     

A study of vibration and vibration control of ship structures

This paper examines the vibration characteristics and vibration control of complex ship structures. It is shown that input mobilities of a ship structure at engine supports, due to out-of-plane force or bending moment excitations, are governed by the flexural stiffness of the engine supports. The frequency averaged input mobilities of the ship structure, due to such excitations, can be represented by those of the corresponding infinite beam. The torsional moment input mobility at the engine support can be estimated from the torsional response of the engine bed section under direct excitation. It is found that the inclusion of ship hull and deck plates in the ship structure model has little effect on the frequency-averaged response of the ship structure. This study also shows that vibration propagation in complex ship structures at low frequencies can be attenuated by imposing irregularities to the ring frame locations in ships. Vibration responses of ship structures due to machinery excitations at higher frequencies can be controlled by structural modifications of the local supporting structures such as engine beds in ships.     

Home-to-work commuting,urban form and potential energy savings: A local scale approach to regional statistics

The link between transport energy consumption and land use patterns has been the focus of a considerable amount of academic works over the past decades. While many empirical researches are backed up with solid statistical techniques, most of them do not fully consider the influence of scale underlying empirical quantitative investigations. Using fine-scale home-to-work commuting data for Wallonia (Belgium), this paper re-evaluates Breheny’s (1995) assertion that urban structure should hold the characteristics of major cities if substantial energy savings are to be achieved. A local scale approach highlights efficient settlements in terms of transport energy consumption not only within major towns, but also within remote rural areas. Furthermore, results suggest that influencing the urban form following local energy efficient examples rather than regional ones could also yield significant gains, without an extreme policy stance of re-urbanisation in major cities.     

Some Difficulties inherent in applying Congestion Theory to Marine Problems

This paper sets out to evaluate the main areas of focus within maritime sociology and to link more closely than hitherto the various substantive discussions with general theoretical and conceptual approaches. More specifically, it suggests directions in which maritime sociology may be advanced at both empirical and conceptual levels in the future.     

Simulation model for the analysis of complex traffic weaving problems

A simulation modeling approach has been developed to analyze a complex traffic weaving problem. It is presented, discussed, and demonstrated on an actual dual purpose weaving area that is closely followed by an entrance‐exit junction. Specifically, the model identifies problem areas in the system, assists the traffic engineer in the formulation of feasible solution strategies, and analyzes the effectiveness of alternative strategies. The simulation model is not presented as a panacea to weaving analysis rather as an interesting and unique approach that has the potential to analyze a wide variety of weaving patterns. The primary conclusion of the paper is that the model can be a valuable tool for analysis of certain types of traffic congestion problems.     

Disused shrimp ponds: Options for redevelopment of mangroves

Associated with the rapid increase in the production of cultured marine shrimp has been large‐scale conversion of mangroves to shrimp ponds. Production in many regions has proved to be unsustainable, largely due to inappropriate construction methods, poor environmental conditions, overstocking, and disease. A number of shrimp ponds consequently are unproductive and lie idle. Accurate assessments of pond disuse are difficult to obtain; however, unofficial estimates have suggested that as many as 70% of ponds may be disused after a period in production. Pond construction, shrimp culture, and pond disuse lead to alterations to the physical and chemical properties of soil, hydrological conditions, and the flora and fauna composition of the pond area. The case for restoration, or rehabilitation to a sustainable use, is strong. Consideration must be given to the causes of production failure, the environmental conditions remaining following disuse, the needs and preferences of pond owners and coastal managers, and technical constraints.     

Road Traffic Demand Elasticity Estimates: A Review

A brief summary of road traffic‐related elasticity estimates as reported in the international literature is given. An indication of the orders of magnitude of these elasticities is outlined and the variation in estimates commonly found is emphasized. The results of previous extensive surveys are collated, but a wider scope of traffic‐related research is provided by reviewing recent work and including research that has received less attention. A variety of elasticity measures related to car travel, car ownership, freight traffic and fuel demand are reported. Based on the review, some important themes underpinning the demand for road traffic are revealed.