资源节约环境友好理念在公路大修工程中的实践

依托G15公路松浦二桥以南大修工程,结合公路自身的病害情况,运用资源节约环境友好的设计理念,设计了利用老路废旧材料及护栏构件的工程技术方案;根据交通特性,应用重载交通改性沥青,有效提高了路面结构上面层的高温稳定性和抗疲劳开裂性能。在获得良好路用性能和经济效益的同时,生态环境效益也非常显著。     

番禺气田珠海终端外涂层检测与失效分析

通过分析番禺气田珠海终端工艺管线涂层类型、涂层缺陷,根据涂层所处的腐蚀环境以及原始设计规范要求,结合影响涂层寿命的4个因素,对整个工艺管线按区域进行了涂层厚度检测与失效统计,评估了工艺管线外涂层的整体状况,分析了涂层腐蚀失效的原因.结果表明:终端管线外涂层存在缺陷,涂层厚度达不到设计要求,而焊缝及法兰出现的腐蚀主要由管线内外腐蚀环境、涂层质量及表面处理质量不好所致.     

城市道路双层隧道交通监控系统设计探讨

本文介绍了城市道路双层隧道交通组织方案和交通诱导方案,分析了双层隧道与单层隧道的区别,阐明了双层隧道交通监控系统的特点。提出了双层隧道不同交通组织情况下的交通监控方案、现场控制网络设计要点、视频监控系统优化方案以及交通安全和设施安全方面需要考虑的问题,可作为同类工程监控方案设计的参考。     

不同驾驶操作行为对车辆燃油消耗量的影响分析

针对车辆驾驶员普遍存在盲目换挡、急加速等不良驾驶行为的现象,研究采用发动机台架试验和道路试验相结合的方法,对汽车起步、换挡时机的选择、加速、减速、车速控制等典型的驾驶操作行为展开研究,通过对不同驾驶操作行为燃油消耗的分析,规范了汽车驾驶操作行为。     

基于遗传算法的BP神经网络短时交通流预测

对BP神经网络模型、方法及遗传算法的基本原理进行了分析,将遗传算法与标准BP神经网络算法相结合构建了基于遗传算法的神经网络算法;建立了基于BP神经网络的短时交通流预测模型,对BP神经网络算法及基于遗传算法的BP神经网络算法进行设计,并将其应用于短时交通流预测模型的仿真计算,仿真结果表明基于遗传算法的BP神经网络算法具有更快的计算速度及更好的适应能力,该方法可以较好地应用于短时交通流预测。     

Mechanism of Tunnel Water Inflow Caused by Bending Failure of a Waterproof Dike Based on a Circular Thin Plate Mechanical Model北大核心CSCD

Water bursts during tunnel construction endanger construction, and it is therefore necessary to reserve a waterproof dike with the required thickness to avoid water bursts and to take reinforcement of the dike and treatment of the structure liable to trigger a water burst. Using the water burst at K5+398 of the Mingyueshan tunnel of the Shanghai-Chengdu expressway as an example, and considering the type of tunnel section and the upright mudstone of the dike, the waterproof dike at the work face is simplified as a round thin plate. A formula for the calculation of a minimum safety thickness for the critical waterproof dike is deduced by analyzing the force applied on the water-proof dike, and the minimum safety thickness for the water burst section at K5+398 of the Mingyueshan tunnel is cal-culated. The numerical simulation analysis demonstrates the critical thickness of waterproof dike at K5+398 of the Mingyueshan tunnel is 1.4-1.55 m, and the calculated water inflow and water burst basically agree with the actual condition. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Effect of Explosion in a Gas Pipeline Compartment of a Utility Tunnel on Neighboring Metro Tunnels北大核心CSCD

In this paper the numerical simulation analysis of the effect of explosion in the gas pipeline compartment of a utility tunnel on neighboring metro tunnels was conducted using the software AUTODYN. The results show that the TNT equivalent in a fireproof partition with length of 200 m is 41.6 kg when the gas concentration in the gas pipeline compartment reaches 10%; the blast wave has much effect on the crown and arch waist of the round metro tunnel and it’s necessary to take some protective measures in both areas; when the surrounding soil is sand, the utili- ty tunnel is above the round metro tunnel and their alignments are in the same direction, the greater the vertical spacing between the utility tunnel and the metro tunnel, the smaller the effect of the blast wave on the metro tunnel; when the vertical spacing is 7.2 m, the maximum dynamic tensile stress is 1.86 MPa (including the static stress value of 1 MPa in the tunnel segment) and it is slightly smaller than the designed tensile strength of metro tunnel (about 1.89 MPa). The maximum vibration velocity and the maximum displacement meet the structural stability require- ments, so it is suggested the vertical spacing between the utility tunnel and metro tunnel shall not be less than 7.2 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Mathematically calculating the transit time of cargo through a liner shipping network with various trans-shipment policies

This paper derives the mathematical expressions for the transit time of cargo through a liner shipping network. Main efforts are devoted to deriving the calculation expressions of the connection time of cargo during trans-shipment. For the forward and many-to-one trans-shipment policies, we conduct a minor correction towards the expressions in existing studies to improve the completeness. Meanwhile, we propose an alternative but more straightforward calculation method for connection time which bypasses the complicated inductive argument in existing studies. Then we introduce two new trans-shipment policies: backward trans-shipment and one-to-many trans-shipment, and mathematically calculate the corresponding connection times. Numerical experiments also deliver some managerial insights into the effectiveness of backward trans-shipment in transit time control.     

提高应变梁加工合格率

本文分析了应变梁因平面度超差而出现的质量问题,通过刀具、加工参数等方面改进来提高其加工质量。     

Bicycle mode share in China: a city-level analysis of long term trends

In the past 15 years, cities in China have experienced big changes in socioeconomic and traffic conditions, resulting in a long term change in bicycle use. This study aims to quantify the changes in bicycle mode share in Chinese cities and explore the potential causes. Based on data from 51 cities, it is found that bicycle mode share at the city level decreased gradually in the past. Conventional bicycle mode share decreased with a rate of 3 % per year, but electric bicycle mode share increased with a rate of 2 % per year. The correlations between city features such as demographics and built environments and bicycle mode share at different city sizes are compared. The generalized linear models are estimated to relate the changes in the share of different trip modes to various city-level factors. The results show that the bicycle mode share in a city is impacted by factors including city area size, population density, number of cars, percentage of local road mileage among all roads, and trip purpose. Possible reasons for the changes in bicycle uses in Chinese cities are explored and policy implications are discussed.