Approximate method for reliability assessment of complex phased mission systems

Phased-mission systems (PMSs) have wide applications in engineering practices, such as manmade satellites. Certain critical parts in the system, such as cold standby, hot standby and functional standby, are designed in redundancy architecture to achieve high reliability performance. State-space models such as Markov process have been used extensively in previous studies for reliability evaluation of PMSs with dynamic behaviors. The most popular way to deal with the dynamic behaviors is Markov process, but it is well known that Markov process is limited to exponential distribution. In practice, however, the lifetime of most machinery products can follow non-exponential distributions like the Weibull distribution which cannot be handled by the Markov process. In order to solve this kind of problem, we present a semi-Markov model combined with an approximation algorithm to analyze PMS reliability subjected to non-exponential failures. Furthermore, the accuracy of the approximation algorithm is investigated by comparing to an accurate solution, and a typical PMS (attitude and orbit control system) is analyzed to demonstrate the implementation of the method.     

Fault diagnosis for wind turbine based on improved extreme learning machine

A fault diagnosis method based on improved extreme learning machine (IELM) is proposed to solve the weakness (weak generalization ability, low diagnostic rate) of traditional fault diagnosis with feedforward neural network algorithm. This method fuses signal feature vectors, extracts six parameters as the principal component analysis (PCA) variables, and calculates correlation coefficient matrix among the variables. The weight values of control parameters in the extreme learning model are dynamically adjusted according to the test samples’ constantly changing. Consequently, the weight fixed drawback in the original model can be remedied. A fault simulation experiment platform for wind turbine drive system is built, eight kinds of fault modes are diagnosed by the improved extreme learning model, and the result is compared with that of other machine learning methods. The experiment indicates that the method can enhance the accuracy and generalization ability of diagnosis, and increase the computing speed. It is convenient for engineering application.     

Gain and noise figure analysis of Er<Superscript>3+</Superscript>-doped YAG transparent ceramic microchip amplifier

The rate equations and the power evolution equations based on excited state absorption (ESA) and cooperative upconversion (CUC) of high concentration erbium-doped yttrium aluminum garnet (YAG) transparent ceramic waveguide amplifier are set up to analyze the effects of the pump power, active ion concentration and waveguide length on the amplifier gain and noise figure (NF). The numerical analysis predicts that with a pump power of 100mW, an active ion concentration of 1.0×10²⁶ ion/m³ and a waveguide length of 3 cm, a small-signal gain of 30 dB and an NF of 5 dB can be achieved in the micro-chip amplifier.     

Effect of orthogonal stiffeners on the stability of axially compressed steel jacking pipe

Load conditions for steel pipe-jacking are complex during the construction stage. The stability of steel jacking pipe has been an increasingly important problem as jacking forces, pipe diameters and jacking distances increase. However, there are no standards for pipe reinforcement, for prevention of buckling, or for remedying pipe that buckles when being jacked axially. Past experience suggests that stiffeners can effectively reinforce the structure. This study analyzes the effect of different stiffeners on the stability of steel jacking pipe under axial compression using finite element analysis. The results suggest that the stability of steel jacking pipe can be significantly improved by using orthogonal stiffeners, in terms of engineering costs and construction space inside the pipe. Based on current engineering practice, the application of orthogonal stiffeners is discussed. This study provides a useful reference for the design and construction of steel jacking pipe.     

Design of car battery protection device based on torsion spring

In recent years, electric vehicles are developing rapidly in automotive industry. When involved in accidents, if the batteries of electric cars break, it is likely to cause a short circuit and start a fire. Aimed at this issue, a car battery protection device based on torsion spring has been designed. The car battery protection device can deform in a particular pattern in a collision accident. Impact energy of the accident is absorbed by the deformation, which can significantly reduce impact force on the batteries. Meanwhile, based on the principle of maximum energy absorption, some crucial parameters of the device can be determined. Furthermore, an impact simulation conducted on ANSYS software shows that maximum safety factors can be obtained when the material of car battery protection device is carbon steel. The analysis of “safe space” in the car battery protection device shows that the device can prevent battery damage effectively in general circumstances, which means the reliability of the device has been verified. Therefore, when applied to electric vehicles, the car battery protection device, which can prevent secondary accidents, significantly improves the vehicle security in accidents.     

Calculation of strain amplification matrix for strain invariant failure theory based on representative volume element models with periodical boundary condition

Strain invariant failure theory (SIFT) is a micro-mechanics-based failure theory for multi-scale failure analysis of composite materials originally proposed by Gosse and Christensen. In this paper, the approach for obtaining strain amplification matrix which is a key step for the execution of SIFT is improved by adopting representative volume element (RVE) finite element models considering periodical boundary condition, based on which more actual deformation mode is reflected. The deformation modes and strain data at the characteristic points of the centroid cell of multi-cell RVE model are analyzed and taken as a reference. It can be concluded that more reasonable deformation mode and relationship between the micro-mechanical and macro-mechanical strain states are obtained by employing the new model. Finally, numerical examples are provided to illustrate the determination of strain amplification factors within the RVEs considering periodical boundary condition at the characteristic points.     

Experimental study on performance of combined cambered-type wave absorbing beach

Wave simulation performance and its quality are key factors to reflect the overall capacity and level of an ocean engineering basin. They include wave simulating and absorbing capacity of reflected waves. In order to reduce the influence of reflected waves, various wave absorbing devices are equipped in ocean engineering basins across the world. The experimental investigation into the performance of combined cambered-type wave absorbing beach (CCTWAB) with damping bars equipped in Deepwater Offshore Basin is conducted. The experiment adopts the two-point method. The reflection coefficients are calculated by the method, in which the incident and reflected waves can be separated from the physically simulated composite waves with different periods and wave heights in the time domain. The experimental results indicate that in the range of normal wave heights and periods for model tests, the CCTWAB with damping bars is excellent in eliminating the reflected waves.     

Uncertainty analysis of value for money assessment for public-private partnership projects

In recent years, private sectors are encouraged to take an active part in franchising of urban infrastructure investments and operations, which promotes the rapid development of public-private partnership (PPP) in infrastructure and public service supply. Value for money (VFM) assessment has been officially proposed to provide a reference for selection of projects planning to adopt PPP. Based on the bottlenecks of VFM application in China and the uncertainties for urban infrastructure PPP projects, a discounted cash flow (DCF) model is established for VFM of infrastructure PPP projects. Then, a Monte Carlo simulation model is established on the basis of uncertainty factors for VFM. Through the analysis of Huai’an trams PPP project, coping strategies of uncertainties for VFM are put forward. Findings of the research may propel the establishment of a complete VFM evaluation system for PPP projects. Key instructional functions of VFM during the process of decision-making can be brought into full play and PPP may develop orderly.     

单向复合材料高应变率下材料特性的研究(英文)

在船舶领域,复合材料及夹芯复合材料板梁结构已大量应用在舰船结构中,尤其游艇及复合材料高速艇上.在运行过程中,这些结构有时很可能会受到如砰击、碰撞等动态载荷或高速冲击载荷.然而到目前为止,大多数的结构设计所用到的材料特性仍基于低应变率情况下的准静态测试结果.该文研究了高速艇等结构中的纤维增强复合材料高应变率情况下的材料特性,通过引入一种粘弹性模型来模拟并分析研究对象.并在世界先进的INSTRON高应变率材料试验机上设计并完成了相关试验,验证了该枯弹性模型、确定了模型中的材料参数.该粘弹性模型然后被用来研究分析应变率对单向复合材料机械特性的影响.     

Egg production and associated losses of carbon, nitrogen and fatty acids from maternal biomass in Calanus finmarchicus before the spring bloom

We present concurrent data on ingestion, egg production and the loss of maternal biomass in pre-spring bloom female Calanus finmarchicus incubated under conditions representative of those in situ in the North Atlantic. A balanced metabolic budget was constructed and used to examine the relative importance of ingestion and biomass for fuelling egg production during the incubations. Ingested carbon was not sufficient to meet the observed demands for egg production. More than 80% of the carbon utilised by the females was instead derived from their biomass. Fatty acid analysis demonstrated that the storage reserves, 20:1 (n−9) and 22:1 (n−11), were virtually absent before experimentation began, and therefore could not have been used to supply the carbon required for egg production during the incubations. The C:N mass-specific ratio of the biomass utilised was 4.1, suggesting that the females had instead catabolised protein in order to meet their metabolic demands. These results suggest that C. finmarchicus adopts a sacrificial reproductive strategy when food availability is low.