Collaborative Management of Natural Resources in San Diego Bay

This article presents the results of a three-year effort at applying information technology to the problem of collaborative natural resource management in San Diego Bay. As such, it represents an approach to integrated coastal zone management (ICZM). This effort resulted from a collaboration between the San Diego Supercomputer Center at the University of California, San Diego and the San Diego Bay Interagency Water Quality Panel for the purpose of (1) developing an environmental data repository to facilitate the acquisition and sharing of data and (2) the development of a visual model of the bay in support of the development of a comprehensive, coordinated management plan for San Diego Bay. It was determined from this study that information technology is an important and key component to ICZM but that sociopolitical factors may override the benefits of decision-support systems and should be considered at the outset of any project of this kind.     

Biological Status Assessment of Coral Reefs in Southern Puerto Rico: Supporting Coral Reef Protection Under the U.S. Clean Water Act

Abstract

States and other jurisdictions may protect coral reefs using biological water quality standards outlined by the United States Clean Water Act (CWA). Such protection will require long-term, regional monitoring of the resource using biological indicators and a probability-based sampling design. A 60-station survey targeting nearshore linear coral reef was conducted across southern Puerto Rico in December 2011 to document the status of reef inhabitants using a probabilistic, regional sampling design. The quantity, type and condition of stony corals, fish, gorgonians, and sponges were documented from each station, providing a robust representation of linear reef status and composition across the region. Fish represented 106 unique taxa and stony corals 32 unique taxa. Benthic organisms (stony corals, sponges, and gorgonians) averaged nearly 12 colonies per square meter, more than half of which were gorgonians. Assessment results can be used as a baseline to compare with future regional surveys to quantify change in reef condition over time (trend). Both temporal and spatial changes can be expected after large-scale disturbances like hurricanes Maria and Irma in 2017. The indicators and probabilistic sampling design support the long-term regional monitoring envisioned by the Environmental Protection Agency to implement CWA protections in Puerto Rico and elsewhere.     

Examining the Political and Practical Reality of Bus-based Real Time Passenger Information

Abstract

Enhancing the bus experience through improved information provision is a key element of UK Government transport policy. Real time passenger information (RTPI) is perceived to reassure waiting passengers, to benefit the bus operator through increased revenue and the local authority, by promoting social inclusion and achieving a modal shift. RTPI also provides an important tool for operators by allowing them to monitor services and refine their schedules.

The aim of this paper is to understand the reasons for implementing RTPI in the bus sector, and to determine the key issues impacting on the likely success of such a policy. A case study approach investigates the experiences of two provincial towns in the UK. The paper suggests that, whilst it is unclear whether RTPI has resulted in an increase in bus patronage, it is considered to be most effective when combined as part of a package of measures. It is intended that the findings from the two case studies will reveal lessons of relevance to authorities contemplating the introduction of RTPI.     

Preview suspension control for a full tracked vehicle

In this study, preview control algorithms for the active and semi-active suspension systems of a full tracked vehicle (FTV) are designed based on a 3-D.O.F model and evaluated. The main issue of this study is to make the ride comfort characteristics of a fast moving tracked vehicle better to keep an operator’s driving capability. Since road wheels almost trace the profiles of the road surface as long as the track doesn’t depart from the ground, the preview information can be obtained by measuring only the absolute position or velocity of the first road wheel. Simulation results show that the performance of the sky-hook suspension system almost follows that of full state feedback suspension system and the on-off semi-active system carries out remarkable performance with the combination of 12 on-off semi-active suspension units. The results simulated with 1^st and 2^nd weighting sets mean that the suspension system combined with the soft type of inner suspension and hard type of outer suspension can carry out better ride comfort characteristics than that with identical suspensions. The full tracked vehicle (FTV) system is uncontrollable and the system is split into controllable and uncontrollable subspace using singular value decomposition transformation. Frequency response curves to four types of inputs, such as heaving, pitching, rolling, and warping inputs, also demonstrate the merits of preview control in ride comfort. All the frequency characteristic responses confirm the continuous time results.     

Simulation of flow in diesel particulate filter system using metal fiber filter media

Metal fiber is introduced as a new filter media in wall-flow Diesel Particulate Filter (DPF) system. This technology has high temperature durability which is required for filter regeneration, and can maintain the mechanical strength even in the extreme exhaust-related vibrations of vehicles. However, the regeneration near the wall (outer layer) is more difficult because of the heat loss and reduced gas flow near the wall. In this study, a flow is simulated to determine the flow control method for the more uniform flow in all filter layer. By using Star CCM+ commercial software, we obtain local velocity, streamline, and pressure distributions in the filter, which are typically difficult to obtain from measurements. The major control factors are the filter porosity, size and location of the distribution plate, and the number of blades of the swirler. By placing the distribution plate in front of the filter, the flow velocity near the wall was increased. The optimum location and size of the flat plate were chosen. By attaching the blade on the plate the flow velocity near the wall was increased more. Therefore, the regeneration efficiency is increased by using the swirler-type metal fiber DPF system.     

Realization of pmp-based control for hybrid electric vehicles in a backward-looking simulation

Optimal control is generally not possible without information about the future coming up, and it is not easy to obtain an optimal solution even though the information is given a priori. In this paper, a control concept based on Pontryagin’s Minimum Principle (PMP) is introduced as an efficient solution to generate an optimal control trajectory for Hybrid Electric Vehicles (HVEs) when the performance of the vehicles is evaluated on scheduled driving cycles at a simulation level. The main idea of the control concept is to minimize Hamiltonian, which is interpreted as equivalent fuel consumption, and the Hamiltonian is characterized by a co-state, which is interpreted as a weighting factor for the electrical usage. A key aspect of the control problem is that an appropriate initial condition of the co-state is required to satisfy the boundary condition of the problem. In this study, techniques to calculate the Hamiltonian in different hybrid configurations are introduced, and a methodology to look for the initial condition of the co-state is studied, so that the controller is able to realize a desired State Of Charge (SOC) trajectory. To address the issue, we utilize a shooting method with multiple initial conditions based on the concept of the Newton-Raphson method, and all these techniques are realized in a backward looking simulator. The simulation results show that the PMP-based control is a very efficient approach to produce the optimal control trajectory, and the performance is compared to the optimal solution solved by Dynamic Programming (DP).     

Enhanced traffic information dissemination to facilitate toll road utilization: a nested logit model of a stated preference survey in Texas

This paper investigates the effects of the provision of traffic information on toll road usage based on a stated preference survey conducted in central Texas. Although many researchers have studied congestion pricing and traffic information dissemination extensively, most of them focused on the effects that these instruments individually produce on transportation system performance. Few studies have been conducted to elaborate on the impacts of traffic information dissemination on toll road utilization. In this study, 716 individuals completed a survey to measure representative public opinions and preferences for toll road usage in support of various traffic information dissemination classified by different modes, contents, and timeliness categories. A nested logit model was developed and estimated to identify the significant attributes of traffic information dissemination, traveler commuting patterns, routing behavior, and demographic characteristics, and analyze their impacts on toll road utilization. The results revealed that the travelers using dynamic message sign systems as their primary mode of receiving traffic information are more likely to choose toll roads. The potential toll road users also indicated their desire to obtain traffic information via internet. Information regarding accident locations, road hazard warnings, and congested roads is frequently sought by travelers. Furthermore, high-quality congested road information dissemination can significantly enhance travelers’ preferences of toll road usage. Specifically the study found that travelers anticipated an average travel time saving of about 11.3 min from better information; this is about 30 % of travelers’ average one-way commuting time. The mean value of the time savings was found to be about $11.82 per hour, close to ½ of the average Austin wage rate. The model specifications and result analyses provide in-depth insights in interpreting travelers’ behavioral tendencies of toll road utilization in support of traffic information. The results are also helpful to shape and develop future transportation toll system and transportation policy.     

Transit to eternal youth: lifecycle and generational trends in Greater Montreal public transport mode share

Young people appear to be using public transit more than their predecessors, reversing twentieth century trends, but the importance of such findings depends on whether high transit use persists as these riders age. This paper examines whether transit mode share for commuting trips is increasing; socio-economic and geographic trends are also explored to attempt to determine whether these trends are likely to continue. The study uses repeated cross-sectional origin–destination surveys of Greater Montreal (1998, 2003 and 2008). Over 45,000 home-to-work and home-to-school trips are studied for each survey year. A general lifecycle pattern of decreasing transit share with age is apparent within cohorts until individuals reach their early 30s, followed by decades of stability. This pattern appears to hold in recent years, but with higher youth use rates, and it is argued that the higher use will continue as current younger cohorts mature. Suburbanization by those in their early 30s is evident and, along with household composition changes, appears to explain much of the final within-cohort mode share declines before equilibrium. Transit providers might see lasting ridership gains, as those currently in their early 30s and younger replace lower-use cohorts in the workforce, provided service provision keeps pace. Addressing the needs of young people, whose mode choices are comparatively unsettled, should be a priority for transit agencies to ensure higher transit usage in the future.     

Finite element analysis of overlay incorporating stress absorbing membrane interlayers against reflective cracking

A wheel tracking test was modelled to gain better understanding of the deflection and stress-strain distribution in an overlaid cracked pavements with and without membrane interlayer （SAMI）. For this purpose, commercial finite element software Abaqus 6.7-1 was used. Two different models were considered, one incorporating stress absorbing membrane interlayers （SAMIs） and the other without SAMI. In the study, full bond condition was assumed for the boundaries between the layers, and a linear elastic model was used for the analysis. The results show that introduction of SAMI caused greater deflection of the pavement. It is found that although with SAMIs, low stiffness is required, a very low stiffness may yield undesirable results. The results show that the introduction of SAMIs results in high strain concentration around the crack region, whilst the strain in the overlay is smaller than the values predicted in the models without SAMIs.     

Vehicle reidentification and travel time measurement on congested freeways

The paper presents an algorithm for matching individual vehicles measured at a freeway detector with the vehicles’ corresponding measurements taken earlier at another detector located upstream. Although this algorithm is potentially compatible with many vehicle detector technologies, the paper illustrates the method using existing dual-loop detectors to measure vehicle lengths. This detector technology has seen widespread deployment for velocity measurement. Since the detectors were not developed to measure vehicle length, these measurements can include significant errors. To overcome this problem, the algorithm exploits drivers’ tendencies to retain their positions within dense platoons. The otherwise complicated task of vehicle reidentification is carried out by matching these platoons rather than individual vehicles. Of course once a vehicle has been matched across neighboring detector stations, the difference in its arrival time at each station defines the vehicle’s travel time on the intervening segment.Findings from an application of the algorithm over a 1/3 mile long segment are presented herein and they indicate that a sufficient number of vehicles can be matched for the purpose of traffic surveillance. As such, the algorithm extracts travel time data without requiring the deployment of new detector technologies. In addition to the immediate impacts on traffic monitoring, the work provides a means to quantify the potential benefits of emerging detector technologies that promise to extract more detailed information from individual vehicles.