Implementing a GPU-based numerical algorithm for modelling dynamics of a high-speed train

This paper discusses the initiative of implementing a GPU-based numerical algorithm for studying various phenomena associated with dynamics of a high-speed railway transport. The proposed numerical algorithm for calculating a critical speed of the bogie is based on the first Lyapunov number. Numerical algorithm is validated by analytical results, derived for a simple model. A dynamic model of a carriage connected to a new dual-wheelset flexible bogie is studied for linear and dry friction damping. Numerical results obtained by CPU, MPU and GPU approaches are compared and appropriateness of these methods is discussed.     

Distributed support modelling for vertical track dynamic analysis

The finite length nature of rail-pad supports is characterised by a Timoshenko beam element formulation over an elastic foundation, giving rise to the distributed support element. The new element is integrated into a vertical track model, which is solved in frequency and time domain. The developed formulation is obtained by solving the governing equations of a Timoshenko beam for this particular case. The interaction between sleeper and rail via the elastic connection is considered in an analytical, compact and efficient way. The modelling technique results in realistic amplitudes of the ‘pinned–pinned’ vibration mode and, additionally, it leads to a smooth evolution of the contact force temporal response and to reduced amplitudes of the rail vertical oscillation, as compared to the results from concentrated support models. Simulations are performed for both parametric and sinusoidal roughness excitation. The model of support proposed here is compared with a previous finite length model developed by other authors, coming to the conclusion that the proposed model gives accurate results at a reduced computational cost.     

A framework for travel time variability analysis using urban traffic incident data

This study aims to develop a framework to estimate travel time variability caused by traffic incidents using integrated traffic, road geometry, incident, and weather data. We develop a series of robust regression models based on the data from a stretch in California's highway system during a two-year period. The models estimate highway clearance time and percent changes in speed for both downstream and upstream sections of the incident bottleneck. The results indicate that highway shoulder and lane width factor adversely impact downstream highway clearance time. Next, travel time variability is estimated based on the proposed speed change models. The results of the split-sample validation show the effectiveness of the proposed models in estimating the travel time variability. Application of the model is examined using a micro-simulation, which demonstrates that equipping travelers with the estimated travel time variability in case of an incident can improve the total travel time by almost 60%. The contribution of this research is to bring several datasets together, which can be advantageous to Traffic Incident Management.     

软土刀具的磨损预测——一种研究刀具磨损系统中主要影响因素的新方法

硬岩隧道掘进机的性能很大程度上取决于其切削刀具的磨损情况。刀具的磨损会降低掘进速度,进而导致掘进时间延长、项目成本增加。通常在隧道项目的规划阶段使用预测模型来进行磨损预测,而常规的磨损试验对磨损系统的考虑还不够准确,并没有考虑到刀具/土体的相互作用、周围介质（水、膨润土）以及掘进过程中的荷载等因素。针对该问题,专门设计了一个水平放置的磨损试验设备。本文介绍了该试验方法,研究并讨论了磨损系统相关因素对磨损率的影响。结果表明,该设备可模拟真实的掘进过程,很好地解决了上述问题,达到了高效、准确预测磨损的效果。     

A tool to aid redesign of flexible transport services to increase efficiency in rural transport service provision

Rural areas generally have lower and more dispersed demands for travel which cannot sustain conventional public transport services and consequently have a greater number of flexible and demand responsive transport services operating. These services usually operate on a stand-alone basis, are often subsidized and are typically only accessible by certain passenger types or for specific trip purposes. This generally results in uncoordinated and inefficient transport provision overall. The Flexible integrated transport services (FITS) system featured in this paper has been designed to address this problem. FITS can be used as a planning tool to assess potential benefits from relaxing operating constraints (e.g., a service's operating boundaries), which can potentially suggest service redesign. It also includes the capacity to assign subsidy payments on a trip by trip basis to increase cost efficiency whilst meeting a greater proportion of transport needs. The case study in the paper focusses on transport to health in the Aberdeenshire and Morayshire areas of Scotland in the UK. Despite flexible transport operators receiving public funds to meet passenger needs, this is currently being supplemented by public bodies paying large amounts in taxi fares in instances where there is a statutory obligation to provide travel but where no other suitable transport service exists. The results demonstrate the potential substantial savings which could be realized by allowing transport operators to redesign their services by relaxing constraints and by the reassignment of subsidies: resulting in more passenger demands being met and a reduction in public spending on taxi fares.     

Improvement of exhaust gas pressure’s utilization for compressing the intake air in diesel engine’s cylinders

In order to improve the economical and environmental performances of the Diesel engines, the present paper aims to bring to the forefront solutions to increase the efficiency of the supercharging process carried out by the aggregates with Comprex type pressure waves. One solution to this is to drive the Comprex, not by the supercharged engine as it currently happens, but by a DC motor. The speed of the electric motor is modified, by means of an electronic management system, depending on the speed and load of the Diesel engine. The paper presents the experimental results obtained during the investigation of a supercharged Diesel engine by the Comprex driven type according to the proposed solution.     

Perspectives on railway track geometry condition monitoring from in-service railway vehicles

This paper presents a view of the current state of monitoring track geometry condition from in-service vehicles. It considers technology used to provide condition monitoring; some issues of processing and the determination of location; how things have evolved over the past decade; and what is being, or could/should be done in future research. Monitoring railway track geometry from an in-service vehicle is an attractive proposition that has become a reality in the past decade. However, this is only the beginning. Seeing the same track over and over again provides an opportunity for observing track geometry degradation that can potentially be used to inform maintenance decisions. Furthermore, it is possible to extend the use of track condition information to identify if maintenance is effective, and to monitor the degradation of individual faults such as dipped joints. There are full unattended track geometry measurement systems running on in-service vehicles in the UK and elsewhere around the world, feeding their geometry measurements into large databases. These data can be retrieved, but little is currently done with the data other than the generation of reports of track geometry that exceeds predefined thresholds. There are examples of simpler systems that measure some track geometry parameters more or less directly and accurately, but forego parameters such as gauge. Additionally, there are experimental systems that use mathematics and models to infer track geometry using data from sensors placed on an in-service vehicle. Finally, there are systems that do not claim to measure track geometry, but monitor some other quantity such as ride quality or bogie acceleration to infer poor track geometry without explicitly measuring it.     

桥墩防落石碰撞柔性设计方法及分析

基于动力学基本原理,从非线性、接触以及本构关系计算理论建立落石-桥墩防撞物柔性碰撞精细化计算模型,并对关键计算参数给出建议取值.利用钢结构柔性变形吸收落石碰撞能量,提出一种桥墩防落石碰撞柔性设计方法,并详细给出该防落石碰撞构造措施的结构组成形式.利用ANSYS/LS-DYNA动力分析计算程序,考虑几何、材料双重非线性,精细化数值仿真计算落石撞击防撞物的动态全过程,以一个偏安全的极限碰撞状态,分别从运动行为(撞击力、位移、速度、加速度)以及能量转换(系统动能、系统变形能)角度进行计算结果与数据分析,证明所提出的柔性防撞设计思路以及防撞措施的合理性与优越性.     

USS Boone (FFG 28) Emergent Underwater Rudder Replacement

On November 30, 2006, USS Boone (FFG 28) lost all steering control in the Mediterranean Sea due to a lost rudder. Within hours of the casualty, numerous US Navy and contractor activities sprung into action to coordinate and complete an emergent voyage repair to return USS Boone to service to support the Global War on Terrorism. The Navy faced a large hurdle to identify and transport a replacement rudder to Rota, Spain, and prepare and carry out an extremely complex repair procedure. Pearl Harbor Naval Shipyard personnel removed the replacement rudder from USS Crommelin (FFG 37) in Pearl Harbor Naval Shipyard and transported the rudder to Rota, Spain. The Navy's Supervisor of Salvage and Diving developed the repair procedure and coordinated the repair operation, which involved over 30 US Navy and contractor divers. The repair team completed the rudder replacement on December 28, 2006 and returned USS Boone to underway operations.