Approximate method for reliability assessment of complex phased mission systems

Phased-mission systems (PMSs) have wide applications in engineering practices, such as manmade satellites. Certain critical parts in the system, such as cold standby, hot standby and functional standby, are designed in redundancy architecture to achieve high reliability performance. State-space models such as Markov process have been used extensively in previous studies for reliability evaluation of PMSs with dynamic behaviors. The most popular way to deal with the dynamic behaviors is Markov process, but it is well known that Markov process is limited to exponential distribution. In practice, however, the lifetime of most machinery products can follow non-exponential distributions like the Weibull distribution which cannot be handled by the Markov process. In order to solve this kind of problem, we present a semi-Markov model combined with an approximation algorithm to analyze PMS reliability subjected to non-exponential failures. Furthermore, the accuracy of the approximation algorithm is investigated by comparing to an accurate solution, and a typical PMS (attitude and orbit control system) is analyzed to demonstrate the implementation of the method.     

Design of car battery protection device based on torsion spring

In recent years, electric vehicles are developing rapidly in automotive industry. When involved in accidents, if the batteries of electric cars break, it is likely to cause a short circuit and start a fire. Aimed at this issue, a car battery protection device based on torsion spring has been designed. The car battery protection device can deform in a particular pattern in a collision accident. Impact energy of the accident is absorbed by the deformation, which can significantly reduce impact force on the batteries. Meanwhile, based on the principle of maximum energy absorption, some crucial parameters of the device can be determined. Furthermore, an impact simulation conducted on ANSYS software shows that maximum safety factors can be obtained when the material of car battery protection device is carbon steel. The analysis of “safe space” in the car battery protection device shows that the device can prevent battery damage effectively in general circumstances, which means the reliability of the device has been verified. Therefore, when applied to electric vehicles, the car battery protection device, which can prevent secondary accidents, significantly improves the vehicle security in accidents.     

Calculation of strain amplification matrix for strain invariant failure theory based on representative volume element models with periodical boundary condition

Strain invariant failure theory (SIFT) is a micro-mechanics-based failure theory for multi-scale failure analysis of composite materials originally proposed by Gosse and Christensen. In this paper, the approach for obtaining strain amplification matrix which is a key step for the execution of SIFT is improved by adopting representative volume element (RVE) finite element models considering periodical boundary condition, based on which more actual deformation mode is reflected. The deformation modes and strain data at the characteristic points of the centroid cell of multi-cell RVE model are analyzed and taken as a reference. It can be concluded that more reasonable deformation mode and relationship between the micro-mechanical and macro-mechanical strain states are obtained by employing the new model. Finally, numerical examples are provided to illustrate the determination of strain amplification factors within the RVEs considering periodical boundary condition at the characteristic points.     

Gain and noise figure analysis of Er<Superscript>3+</Superscript>-doped YAG transparent ceramic microchip amplifier

The rate equations and the power evolution equations based on excited state absorption (ESA) and cooperative upconversion (CUC) of high concentration erbium-doped yttrium aluminum garnet (YAG) transparent ceramic waveguide amplifier are set up to analyze the effects of the pump power, active ion concentration and waveguide length on the amplifier gain and noise figure (NF). The numerical analysis predicts that with a pump power of 100mW, an active ion concentration of 1.0×10²⁶ ion/m³ and a waveguide length of 3 cm, a small-signal gain of 30 dB and an NF of 5 dB can be achieved in the micro-chip amplifier.     

Urban walkability considering pedestrians’ perceptions of the built environment: a 10-year review and a case study in a medium-sized city in Latin America

ABSTRACT

Numerous methodologies measuring walkability have been developed over the last years. This paper reviews the Walkability Index (WI) literature of the last decade (2009–2018) and highlights some limitations in the current approaches. Only a few studies have evaluated walkability in Latin America, mainly in big cities but not in medium and small-sized cities in the region, which present their own urbanisation dynamics, security issues, sidewalk invasion problems, and poor planning. Furthermore, most WIs in the literature use objective mesoscale variables to assess walkability in a given area. This paper contributes to filling these gaps by generating new evidence from a medium-sized city in Latin America to question if characteristics of the built environment encourage walking trips, as found in the literature, are transferable among regions. The study also proposes a novel index comprised of microscale and mesoscale built environment variables to assess walkability using virtual tools and considering users’ perceptions. The WI estimation relies on ranking probability models. The results of the case study suggest that subjective Security and Traffic Safety are the most crucial factors influencing walkability in these kind of cities, which is different from what is found in the literature from cities in developed countries where Sidewalk Condition and Attractiveness are the most important factors. Security appeared to be strongly associated with a subjective dimension, represented by the fear of crime or perceived risk for crime, instead of the actual occurrence of crimes. This result evidences the importance of the physical attributes of the real world and how they are captured, judged, and processed by pedestrians. Then, regional transferability of WIs needs to be done carefully. Finally, results in this paper highlight the importance of microscale built environment characteristics in the WI formulation in these cities. Results are in line with other research in some cities of the region, which found that microscale variables such as pavement quality and presence of obstacles on the sidewalks are relevant components to promote walkability.     

The jurisdictional challenges to the prosecution of piracy cases in Kenya: mixed fortunes for a perfect model in the global war against piracy

Since 2008 Kenya has distinguished itself in the global war against piracy by undertaking prosecutions in the national courts of suspected pirates arrested in the high seas and handed over by navies of leading maritime nations under bilateral agreements (MOUs) entered into between Kenya and these leading maritime nations. As of July 2011, Kenya had over 20 convicted pirates serving jail terms ranging between 7 and 20 years and over 100 suspected pirates awaiting trial in national courts. This is the largest number of suspected pirates held and tried in any one state at any given time in modern history. To achieve this, Kenya had to effect far reaching changes in the law. In the initial stages, suspected pirates were charged under Kenya’s Penal Code (Cap 63 Laws of Kenya). However, the high court in the case of Re Mohamud Mohamed Dashi and eight others [2010] eKLR, ruled that Kenya had no jurisdiction to try suspected pirates under that law. In September 2009, Kenya passed a new law (the Merchant Shipping Act), which not only defined more comprehensively and extensively the offence of piracy, but also extended the jurisdiction of Kenyan courts to try piracy committed by non-nationals. Though the law gives Kenya a very broad jurisdiction to try suspected pirates, the process is still fraught with challenges due to lack of financial and human resources. In the case of Republic vs Hassan Jama Haleys Alias Hassan Jamal and five others [2010] eKLR, the court commented thus:

“… I must note that the ‘piracy trials’ have presented a unique challenge to the Kenyan legal system. We cannot ignore the fact that these are suspects who having been arrested by foreign naval forces on the High Seas are brought to Kenya for trial. They are strangers in the country, do not understand the legal system, may not know what their rights are and do not understand the language… the Kenyan Government and the International partners supporting these trials put in place a system to provide free legal representation for the suspects…”     

Personalization method of e-catalog based on user interesting degree

The user interesting degree evaluation index is designed to fulfill the users’ real needs, which includes the user’ attention degree of commodity, hot commodity and preferential commodity. User interesting degree model (UIDM) is constructed to justify the value of user interesting degree; the personalization approach is presented; operations of add and delete nodes (branches) are covered in this paper. The improved e-catalog is more satisfied to users’ needs and wants than the former e-catalog which stands for enterprises, and the improved one can complete the recommendation of related products of enterprises.     

Simulation of mixed gas formation for a spray-wall complex guided LPG direct injection engine

To obtain an ultralean air-fuel ratio and to reduce engine-out NOX and HC emissions induced by the richer mixture near the spark plug, a spray and wall complex guided combustion system has been developed by utilizing the fuel characteristics of LPG. The new combustion system configuration is optimized by using a commercial CFD code, FIRE V2013, and the reliability of the system has been experimentally demonstrated by Plane Laser-Induced Fluorescence (PLIF). The mixture formation in the new combustion system under part load (2,000 rpm) is numerically simulated. With an injection timing of 40°CA BTDC, the LPG spray which is injected from two upper holes, reaches the ignition point, and the other part of the LPG spray which is injected from the bottom hole, is directed to the ignition point through the vertical vortices at the same time. At the ignition timing of about 20°CA BTDC, the two-part mixtures have been shown to form a stable and richer stratified mixture around the ignition point, and the maximum global air-fuel ratio reaches to 60: 1.     

Integrated approach to an optimal automotive timing chain system design

Ensuring engine efficiency is a crucial issue for automotive manufacturers. Several manufacturers focus on reducing the time taken to develop and introduce brand new vehicles to the market. Thus, a synergic approach including various simulations is generally adopted to achieve a development schedule and to reduce the cost of physical tests. This study involved proposing a design process that is very useful in the preliminary development stage through effective support from simulations. This type of simulation-based design process is effective in developing timing chain drives; the use of this process, based on results from multiple trials, showed improvements in performance including low friction and vibration, improved durability, and cost-effective part design when compared to conventional processes. This study proposes an integrated approach to the preliminary design of an automotive timing chain system. The approach involves structural and dynamic analyses. The details of the design process are described by using the case of a virtual engine. This study conducted and summarized a dynamic and structural analysis as well as topological optimization to describe a process to obtain optimal results. The results of this study indicated the following improvements in overall performance factors: 12.1 % improvement in transmission error, 10.1 % reduction in chain tension, 46 % reduction in tensioner arm weight, and 11 % reduction in transversal displacement.     

Approximate optimal AUTOSAR software components deploying approach for automotive E/E system

The AUTOSAR has been developed as the worldwide standard for automotive E/E software systems, making the electronic components of different suppliers to be employed universally. However, as the number of component-based applications in modern automotive embedded systems grows rapidly and the hardware topology becomes increasingly complex, deploying such large number of components in automotive distributed system in manual way is over-dependent on experience of engineers which in turn is time consuming. Furthermore, the resource limitation and scheduling analysis make the problems more complex for developers to find out an approximate optimal deploying approach in system integration. In this paper, we propose a novel method to deploy the AUTOSAR components onto ECUs with the following features. First, a clustering algorithm is designed for deploying components automatically within relatively low time complexity. Second, a fitness function is designed to balance the ECUs load. The goal of our approach is to minimize the communication cost over all the runnable entities while meeting all corresponding timing constraints and balancing all the ECUs load. The experiment results show that our approach is efficient and has well performance by comparing with other existing methods in specific and synthetic data set.