License plate extraction method for identification of vehicle violations at a railway level crossing

The primary cause of most railroad accidents is vehicle entry into railway level crossings despite warning messages. To identify drivers who violate railway level crossing regulations, vehicle license plate recognition can be applied at railway level crossings. The purpose of this paper is to present an effective method for extracting the license plate region from vehicle images taken at railway level crossings. The method proposed in this paper uses the variation in the gray-level values across the image of a license plate. For license plate region extraction, the character region is first recognized by identifying the character width and the difference between the background region and the character region. The license plate region is then extracted by finding the inter-character distance in the plate region. In addition, the license plate type is identified by the difference in the gray-level value between the background region and the character region. The proposed method is effective in solving the current challenges in extracting the license plate region from the damaged frames of license plates issued for domestic use, including new types of license plates. According to the experimental results, the proposed method yields a high extraction rate of 99.5% for vehicle license plates.     

Design framework for FlexRay network parameter optimization

Because the FlexRay protocol has more than 70 configuration parameters and these parameters correlate with each other, designing a FlexRay network is a complex and difficult task. In this study, we propose a design framework that optimizes the two main FlexRay network parameters that are highly relevant to the application algorithm. The design process is composed of two steps for optimizing parameters. In the first step, the static slot length is optimized using a frame-packing algorithm. This algorithm binds network signals into static frames based on their periods and signal groups. In the second step, the communication cycle length is optimally designed with frame-scheduling algorithm and worst-case reponse time analysis. Based on the frame-scheduling algorithm, the response times are analyzed. The proposed design framework was applied to a unified chassis control system as a case study, and the analytical results were verified.     

Vehicle interior noise model based on a power law

Identifying the components of a vehicle’s interior noise is important in many phases of the noise, vibration, and harshness (NVH) development process. Many test methods that have been widely used in the automobile industry to separate noise sources are based on system identification methods in the frequency domain. However, none of the frequency response function-based methods can directly estimate the wind noise component. In this article, an analytical model for the interior noise level based on a simple power law was developed. It was assumed that the mean squared acoustic pressure for the interior noise could be obtained by summing up those of the wind noise, road noise, and background noise. The wind noise and road noise were further assumed to depend only on wind speed and the vehicle’s driving speed, respectively, and to follow a simple power law. The resulting analytical model includes five parameters that can be optimized for the vehicle and the road. The validity of the model was verified by using data obtained from cruise tests performed on a proving ground for cruise speeds ranging from 40 km/h to 130 km/h. The model is applied to the overall and 1/3-octave bands of interior noise and is shown to describe the data trends fairly well. For the test vehicle used in the present work, the overall mean squared pressures for the wind and road noise components are shown to be proportional to the wind speed to the 5.8 power and to the driving speed to the 3.4 power, respectively.     

Piston-temperature measuring system using electromagnetic induction with verification by a telemetry system

The development of an inner-piston-chamber temperature measurement system is a necessary step in engine development or when solving other fundamental problems related to automotive engines. There are various pre-existing measurement methods available, e.g., the linkage method, piston telemetry, templog, and the electromagnetic induction method. In this study, we first redesigned the coil sensor used in the electromagnetic induction method using PEEK and then used Taguchi methods to reduce the number of experiments in the development process and finally utilized piston telemetry via Bluetooth to verify the precision and accuracy of the redesigned PEEK coil sensor and electromagnetic induction method. The results displayed a reproducibility within 0.5 degrees and an accuracy within 2 degrees Celsius.     

Seaport research: A structured literature review on methodological issues since the 1980s

This study aims to investigate how seaport research has been conducted from the methodological perspective. To this end, this study reviews published port literature for the last three decades (1980-2000s). The investigation primarily categorises the literature according to various methodological issues such as research paradigm, research strategy, base-disciplines, research methods and analysis techniques in order to provide meaningful implications on methodological evolution in seaport research for the period. This study suggests methodological bias in port research to a positivistic paradigm, following a quantitative trajectory moving from conceptual to empirical studies. In addition, the increased use of mathematical modelling and advanced statistical analysis methods is clearly observed. The introduction of advanced analytical tools used in other academic disciplines facilitates discussions in particular research area and amplifies the literature in those areas. This paper also suggests research gaps from the methodological perspective and implications for future port research.     

Mobility, social exclusion and well-being: Exploring the links

Building on a growing research foundation, transport policy makers have begun to associate the ability to be mobile with having a role in the facilitation of social inclusion. However, the further connection to well-being is not as well understood. This paper explores the association between a person’s travel patterns, their risk of social exclusion and self-assessed well-being. Key influences on social exclusion are discussed, with trip making emerging as a significant influence. Trip making is not a significant direct influence on well-being but does exercise an indirect influence through the impact on risk of social exclusion. The modelling process enables a value for additional trips to be estimated, the value being about four times the values derived from conventional generated traffic approaches. Similar high values are found in separate metropolitan and regional case studies, confirming the significance of the results.     

中国城市道路规划方位性问题研究

文章结合中国的传统建筑文化理念和现代科学原理,从历史文化、能源节约、环境保护、房地产定价、交通安全等多方面分析研究了城市道路在规划和设计时所应遵从的定向规则。     

Large oil tankers and the Baltic marine environment: A statistical survey

The short Baltic export route for Russian oil is an attractive source of supply for the European energy market. The article examines the Russian oil export trade in the Baltic based on Automatic Identification System (AIS) data from 2005 matched with supplementary data. The first part of the article gives a survey of activities and characteristics of 261 large crude oil tankers, their flag states and owner countries. The second part views the data in the context of accidental oil spill risk. Greek and Russian owners are leading carriers in this trade. Russia plays a double leading role as oil exporter and shipowning country, securing major cargo shares for nationally owned vessels, while also giving a preferential spot in the trade to Greek owners. Where environmental aspects are concerned, previous research has linked vessel characteristics with the risk of casualty. Knowledge of flag, age, ownership and activity levels adds useful information about environmental risk. The data show that flags associated with very high casualty or detention probabilities were represented by 18% of the activity in this trade. Older vessels have a similar share, and at this particular time probably represent the more serious threat of accidental oil spills.     

Dynamics of LRT growth: Karlsruhe since 1975

The public transport system of Karlsruhe, in particular its innovative services on jointly used heavy rail lines, has received substantial attention throughout the past 20 years. The discussion of the system and of its development has been rather limited in the past, mostly highlighting technical aspects. This paper provides an overview of the development, including the urban development, of the region and of the funding system. The ridership and financial development of the operator is documented in detail. Three case studies focus on the integration of the system development in the general political process of the region and demonstrate the limitations of the operator under its current ownership structures.