Evaluation of general aviation management at Denver Stapleton airport

The potential benefits of general aviation management at a major airport is examined in this paper. The three general aviation management techniques investigated are volume reduction, runway segregation and time restriction.

First, a methodology for analyzing these techniques is discussed. The various effects on each user group are quantified for economic comparison between each management technique attempted. A computer simulation model was used to measure the delay effects. Then, these techniques are applied to Denver Stapleton Airport to measure their effects in present and future scenarios.

The results show that the best general aviation management technique is volume restriction. The use of peak‐hour pricing mechanism provided better results than random rejection, particularly if only a small degree of diversion is desired. The construction of a new general aviation runway provided equivalent results to the best technique tested.     

Do parking requirements significantly increase the area dedicated to parking? A test of the effect of parking requirements values in Los Angeles County

Minimum parking requirements (MPRs) are the norm for urban and suburban development in the United States (Davidson et al., 2002). The justification for MPRs is that overflow parking will occupy nearby street or off-street parking. Shoup (1999a) and Willson (1995) provide cases where there is reason to believe that parking space requirements have forced parcel developers to place more parking than they would in the absence of parking requirements. However, to our knowledge the existing literature does not test the effect of parking minimums on the amount of lot space devoted to parking beyond a few case studies. This paper tests the hypothesis that MPRs bind for most land uses using data on suburban office, commercial, industrial and retail property sales from Los Angeles County using both direct and indirect approaches. Our indirect test of the effects of parking requirements is similar to the one used by Glaeser and Gyourko (2003). A simple theoretical model shows that the marginal value of additional parking to the sale price of a building should be equal to the cost of land plus the cost of parking construction. We estimate the marginal values of parking and lot area with spatial methods using a large data set from the Los Angeles area non-residential property sales and find that for most of the property types the marginal value of parking is significantly below that of the parcel area. In addition, we directly examine required and supplied parking and find that on average parking supplied is quite close to the required amount.     

Influence of vehicle driving parameters on the noise caused by passenger cars in urban traffic

In this work, a sample of vehicles has been instrumented to measure of variables that influence vehicle noise emissions in Madrid. A circuit reproducing a normal travel pattern in large city is traveled by a fleet of vehicle models representing the fleets of cars in a European city. A sample of drivers covers the test track under different traffic conditions. Driving parameters and noise emitted have been recorded in each test and average values have been extracted. These data have been analyzed to define the noise emissions produced by a vehicle in real driving conditions and to identify the noisiest driving behaviors.     

Are Longer and Heavier Vehicles (LHVs) Beneficial for Society? A Cost Benefit Analysis to Evaluate their Potential Implementation in Spain

Abstract

In this paper we carry out a thorough review of the current research related to the benefits and costs arising from the implementation of longer and heavier vehicles (LHVs). From this review we concluded that despite the many studies available, little has been said about the sensitivity of the benefits and costs to the ultimate performance of the key variables related to the evolution of the economy, road transport performance, safety, and so on. In order to fill this gap, we have designed a sensitivity approach based on a cost benefit analysis tool to determine which variables demonstrate the greatest influence on the benefits and costs stemming from the implementation of LHVs. In order to test the methodology, we have used it in an analysis of the Spanish trunk network. The results show that the benefits of LHVs for society are significant. Even in the least favorable scenario, the economic benefits are greater than €3500 million over 15 years, and the environment enhanced as well, for CO₂ emissions are reduced by 2 Million tonnes. Overall we noted how the results are not very sensitive to the evolution of key variables in determining the final outcome. However, we found that the variables that have the greatest affect on the final benefit, such as traffic growth and social discount rate, depend basically on the performance of the overall economy. Moreover, the private cost for haulers seems to be more important in determining the final benefit than externality costs.     

Prediction of the dimensional deformation of the addendum and dedendum after the warm shrink fitting process using a correction coefficient

The warm shrink fitting process is generally used to assemble automobile transmission parts (shafts/gears). However, this process causes a deformation in the addendum and dedendum of the gear depending on the fitting interference and gear profile, and this deformation causes additional noise and vibration between the gears. To address these problems, the warm shrink fitting process is analyzed by considering the error in the dimensional deformation of the addendum and dedendum found when comparing the results of a theoretical analysis and finite element analysis (FEA). A correction coefficient that reduces this error is derived through an analysis of the difference in the cross-sectional area between the shapes used for the theoretical analysis and that of the actual gear, and a closed-form equation to predict the dimensional deformation of the addendum and dedendum is proposed. The FEA method is proposed to analyze the thermal-structural-thermal coupled field analysis of the warm shrink fitting process (heating-fitting-cooling process). To verify the closed-form equation using the correction coefficient, measurements are made of actual helical gears used in automobile transmissions. The results are in good agreement with those given by the closed-form equation.     

Major sources of hydrocarbon emissions in a premixed charge compression ignition engine

Although premixed charge compression ignition (PCCI) combustion engines are praised for potentially high efficiency and clean exhaust, experimental engines built to date emit more hydrocarbons (HCs) and carbon monoxide (CO) than the conventional machines. These compounds are not only strictly controlled components of the exhaust gas of road vehicles but are also an energy loss indicator. The prime objective of this study was to investigate the major sources of the HCs formed in the combustion chamber of an experimental PCCI engine in order to suggest some effective technologies for HC reduction. In this study, to explore the dominant sources of HC emissions in both operation modes, a single cylinder engine was prepared such that it could operate using either conventional diesel combustion or PCCI combustion. Specifically, the contributions of the top-ring crevice volume in the combustion chamber and the bulk quenching of the lean mixture were investigated. To understand the influence of the shape and magnitude of the crevice on HC emissions, the engine was operated with 12 specially prepared pistons with different top-ring crevices installed one after another. The engine emitted proportionally more HCs as the depth of the crevice increased as long as the width remained narrower than the prevailing quench distance. The top-ring-crevice-originated exhaust HCs comprised approximately 31% of the total HC emissions in the baseline condition. In a series of tests to estimate the effects of bulk quench on exhaust HC emissions, intake air was heated from 300K to 400K in steps of 25K. With the intake air heated, HC and CO emissions decreased with a gradually diminishing rate to zero at 375K. In conclusion, the most dominant sources of HC emissions in PCCI engines were the crevice volumes in the combustion chamber and the bulk quenching of the lean mixtures. The key methods for reducing HC emissions in PCCI engines are minimizing crevice volume in the combustion chamber and maximizing intake air temperature allowed based on the permissible NOx level.     

Fuel consumption of fuel cell hybrid vehicles considering battery SOC differences

Fuel cell hybrid vehicles (FCHVs) have become one of the most promising candidates for future transportation due to current energy supply problem and environmental problem. Fuel economy is an important factor in FCHVs. In order to properly evaluate the fuel economy of an FCHV, the initial battery state of charge (SOC) and the final battery SOC have to be identical so that the effect of the battery energy usage on the fuel economy is neglected. In the simulation or in the real driving, however, the final battery SOC is usually different from the initial battery SOC, and the final battery SOC often depends on the power management strategy. To consider the difference between the two battery SOC values, the concept of equivalent fuel consumption is presented by two methods. One is based on the relationship between delta SOC and delta fuel consumption, and the other is based on the optimal control theory. Two rule-based power management strategies for an FCHV are presented, and for each strategy, the fuel economy is evaluated based on the two methods. The characteristics of the two methods are discussed and compared, and the superior one is selected based on the comparison.     

Evasive manoeuvres with a steering robot

In the pursuit of an objective rating on vehicle stability performance, it is always desirable to reduce disturbances and inconsistencies during experimental evaluations, especially the ones introduced by human drivers. This paper presents the development of a steering robot designed for closed-loop steering tasks during evasive manoeuvres. It describes the controller structure and discusses experimental results, in addition to simulation/vehicle model verifications and theoretical control analysis.     

软土刀具的磨损预测——一种研究刀具磨损系统中主要影响因素的新方法

硬岩隧道掘进机的性能很大程度上取决于其切削刀具的磨损情况。刀具的磨损会降低掘进速度,进而导致掘进时间延长、项目成本增加。通常在隧道项目的规划阶段使用预测模型来进行磨损预测,而常规的磨损试验对磨损系统的考虑还不够准确,并没有考虑到刀具/土体的相互作用、周围介质（水、膨润土）以及掘进过程中的荷载等因素。针对该问题,专门设计了一个水平放置的磨损试验设备。本文介绍了该试验方法,研究并讨论了磨损系统相关因素对磨损率的影响。结果表明,该设备可模拟真实的掘进过程,很好地解决了上述问题,达到了高效、准确预测磨损的效果。     

Coastal Tourist Interest in Value-Added,Aquaculture-Based,Culinary Tourism Opportunities

Despite increasing focus on sustainable aquaculture investment in the U.S. coastal zones, the aquaculture industry continues to face skepticism among consumers due to perceived negative environmental impacts, and health and food safety concerns. Partnering with culinary tourism and local food promotion efforts has potential for improving public outreach about the benefits of aquaculture, especially in coastal destinations where sustainable marine aquaculture and tourism are both occurring. Culinary tourism implies that local foods reflect the local livelihood and culture, and may be important to the tourist's experience. Aquaculture is becoming increasingly valuable to coastal destinations for assuring the steady availability of local seafood to meet demand and retaining commercial fisheries as a means to differentiate themselves to tourists. This study examined the role of subjective knowledge and attitude about aquaculture, and their effect on intention to participate in value-added culinary aquaculture tourism experiences. The study found that tourists' subjective knowledge and attitude about aquaculture influenced intentions to participate in culinary aquaculture tourism. In order for farmers or tour operators to be successful in diversifying with value-added culinary aquaculture, attention needs to be paid to educating consumers, which may be possible through strategic partnerships with tourism organizations, chefs, and restaurants.