Alternative fuels for transportation

The alternatives to the oil based fuels for transportation are considered and analysed. These are the synthetic fuels, made from coal, the liquid petroleum gases of propane and butane, compressed natural gas and methanol. The problems associated with the use of electric vehicles are discussed; the main problem being that of range.

The possible use of hydrogen as a fuel is analysed in some detail. Since its supply can be tied directly to nuclear energy sources, rather than hydrocarbon feed stocks, it could be an alternative in the long term. The main problems of the storage of hydrogen on the vehicle and of its propensity to “back‐fire” into the engine intake are discussed. The first can be ameliorated and the second eliminated by dual fuelling; with petrol. It is advocated that the on‐board storage of hydrogen be by the use of hydrides for private cars. However, it is expected that it may be as liquid hydrogen for some forms of transport and will certainly be in this form for aircraft.     

Improving the estimation of total and direction-based heavy-duty vehicle annual average daily traffic

Abstract

The estimation of annual average daily traffic (AADT) is an important parameter collected and maintained by all US departments of transportation. There have been many past research studies that have focused on ways to improve the estimation of AADT. This paper builds upon previous research and compares eight methods, both traditional and cluster-based methodologies, for aggregating monthly adjustment factors for heavy-duty vehicles (US Department of Transportation Federal Highway Administration (FHWA) vehicle classes 4–13). In addition to the direct comparison between the methodologies, the results from the analysis of variance show at the 95% confidence level that the four cluster-based methods produce statistically lower variance and coefficient of variation over the more traditional approaches. In addition to these findings – which are consistent with previous total volume studies – further analysis is performed to compare total heavy-duty monthly adjustment factors, both directions of traffic, with direction-based monthly adjustment factors. The final results show that the variance as well as the coefficient of variation improve on average by 25% when directional aggregate monthly adjustment factors are used instead of total direction.     

Dynamics of LRT growth: Karlsruhe since 1975

The public transport system of Karlsruhe, in particular its innovative services on jointly used heavy rail lines, has received substantial attention throughout the past 20 years. The discussion of the system and of its development has been rather limited in the past, mostly highlighting technical aspects. This paper provides an overview of the development, including the urban development, of the region and of the funding system. The ridership and financial development of the operator is documented in detail. Three case studies focus on the integration of the system development in the general political process of the region and demonstrate the limitations of the operator under its current ownership structures.     

Experience in judging controversial road projects

Abstract

Road construction of all kinds, especially of urban motorways, has in recent years acquired a very bad reputation in industrialized countries. Traffic engineers are, because of their attitude, not entirely without blame for this development. With their attention glued nearly hypnotically to dimensions and technical design, considerations about the meaning and function of the construction are very often neglected, all the more since the engineers might otherwise risk their own jobs. It is, however, becoming increasingly clear that the cause of the scepticism and uneasiness prevailing in the public is the lack of a comprehensive judgement. Using a concrete example, this paper describes how decision‐making can degenerate when such judgement is omitted. Using a second example, it is then demonstrated how such a comprehensive judgement can be integrated in decision‐making from the very beginning. Such an integration sets very high methodological and procedural standards and constructive aids are offered for this purpose. It is shown that, while the substantial findings of a comprehensive judgement should be logically consistent, plausible and up to the latest standard of knowledge, the nature and intelligibility of the presentation and the preparedness for a publicly presented explanation in the form of ‘after‐care’ are of much greater importance for decision‐making in the political sphere. This ‘after‐care’ should accordingly become an indispensable component of the decision‐making process.

All those involved should become aware of the fact that a ‘positive’ result of decision‐making in the field of road construction is not a priori defined as the construction of road and a ‘negative’ one as its prevention. The actual positive result is rather the creation of a consciousness of the problem on hand, which can serve as a basis on which a decision is taken in full realization of all its consequences.     

Remoteness and accessibility in the vulnerability analysis of regional road networks

This paper considers the development of a method for network vulnerability analysis which considers the socio-economic impacts of network degradation and seeks to determine the most critical locations in the network. The method compares the levels of remoteness (or its inverse, accessibility) of localities within the study region, on the basis of the impacts of degradation of the road network on a recognised accessibility/remoteness index that can be applied to each and every location within the region. It thus extends the earlier work on accessibility-based vulnerability analysis which was limited to assessment of impacts on selected nodes in a network. The new method allows study of impacts on both specified locations (which do not have to be represented as network nodes) and the region as a whole. The accessibility/remoteness index is defined so that an accessibility surface can be calculated for the region, and the volume under this surface provides an overall measure of accessibility. Changes in the volume under different network states thus reflect the overall impacts. The method is applied to a rural region in south east Australia.     

The impact of job assignment rules for straddle carriers on the throughput of container terminals

Straddle carriers represent a critical resource in the handling of containers within a container terminal. It is essential that they are deployed in an as efficient manner as possible. The research presented in this paper is motivated by the need to critically evaluate job assignment rules for straddle carriers that operate in a multiple straddle environment. This is achieved by developing a discrete event simulation model using industrial simulation software to model a container terminal located in Melbourne, Australia. The model accounts for variables such as the number of straddle carriers needed, the speed of straddle carriers, the arrival rate of trucks, and the job assignment rule. A principal finding of the study is that increasing the number of straddles in the present set‐up from 6 to 7 has a negligible effect on daily throughput. However, an increase in the number of straddles to 7 is expected to have a profound effect on reducing the average waiting time of trucks within the terminal from over 16 minutes to under 9 minutes, a decrease of 46.5%. However, a further increase in the number of straddles results in no further increase in daily throughput. It was observed that the throughput of the terminal is very sensitive to the speeds at which straddles travel. The management of the terminal has proposed a new heuristic job assignment rule for straddles, because the present rule does not assign the jobs to straddles closest to the truck requesting to load or unload a container. As a result a new heuristic job assignment rule was tested. The simulation results revealed that both the old and new rules performed equally well using performance indicators such as average container flow time, daily throughput, average waiting time of jobs, number of jobs in the queue, and straddle utilisation. Therefore, the new rule will not improve these performance measures if implemented     

阿尔斯通开发的PRIMA 3U15型电力机车

阿尔斯通公司运输部开发了PRIMATM机车系列,其类型满足了运营部门提出的模块化和系列化要求.投放欧洲市场的PRIMA型电力机车既满足了通用性要求,又有助于与公路的经济竞争取得成效.为此,阿尔斯通公司继法国双流制机车后又开发了一种三流制机车,该型机车可用于法国、德国和瑞士之间的跨境运输.文章介绍PRIMATM系列的开发过程以及得到法国国家铁路的订单.详细叙述了PRIMA 3U15型三流制机车,重点是PRIMA电力机车的维修、可靠性和可用性.