Introducing Willingness‐to‐pay for Noise Changes into Transport Appraisal: An Application of Benefit Transfer

Abstract

Numerous research studies have elicited willingness‐to‐pay values for transport‐related noise. However, in many industrialized countries including the UK, noise costs and benefits are still not incorporated into appraisals for most transport projects and policy changes. This paper describes the actions recently taken in the UK to address this issue, comprising: primary research based on the city of Birmingham; an international review of willingness‐to‐pay evidence; the development of values using benefit transfers over time and locations; and integration with appraisal methods. Amongst the main findings are: that the willingness‐to‐pay estimates derived for the UK are broadly comparable with those used in appraisal elsewhere in Europe; that there is a case for a lower threshold at 45 dB(A)Leq,18h rather than the more conventional 55 dB(A); and that values per dB(A) increase with the noise level above this threshold. There are significant issues over the valuation of rail versus road noise, the neglect of non‐residential noise and the valuation of high noise levels in different countries. Conclusions are drawn regarding the feasibility of noise valuation based on benefit transfers in the UK and elsewhere, and future research needs in this field are discussed.     

Climate Change and Coastal Management Decisions: Insights from Christchurch Bay,UK

The integration of climate change adaptation considerations into management of the coast poses major challenges for decision makers. This article reports on a case study undertaken in Christchurch Bay, UK, examining local capacity for strategic response to climate risks, with a particular focus on issues surrounding coastal defense. Drawing primarily on qualitative research with local and regional stakeholders, the analysis identifies fundamental disjunctures between generic concerns over climate change and the adaptive capacity of local management institutions. Closely linked with issues of scale, the problems highlighted here are likely to have broad and continuing relevance for future coastal management elsewhere.     

Culture,Ethnography, and Marine Affairs

Abstract

Marine and coastal zone policy represents a collaboration of people managing and people managed. This paper takes a holistic stance in suggesting that marine communities are viewed properly as networks of focused interest groups, policymakers, professionals, and publics. The interplay between culture and marine and coastal policy is appropriately one topic of applied social research. Seven ethnographic studies in this domain are introduced in this theme issue and help us to understand sociocultural processes and institutions bearing on marine affairs.     

PIV study of the effect of piston position on the in-cylinder swirling flow during the scavenging process in large two-stroke marine diesel engines

A simplified model of a low speed large two-stroke marine diesel engine cylinder is developed. The effect of piston position on the in-cylinder swirling flow during the scavenging process is studied using the stereoscopic particle image velocimetry technique. The measurements are conducted at different cross-sectional planes along the cylinder length and at piston positions covering the air intake port by 0, 25, 50 and 75 %. When the intake port is fully open, the tangential velocity profile is similar to a Burgers vortex, whereas the axial velocity has a wake-like profile. Due to internal wall friction, the swirl decays downstream, and the size of the vortex core increases. For increasing port closures, the tangential velocity profile changes from a Burgers vortex to a forced vortex, and the axial velocity changes correspondingly from a wake-like profile to a jet-like profile. For piston position with 75 % intake port closure, the jet-like axial velocity profile at a cross-sectional plane close to the intake port changes back to a wake-like profile at the adjacent downstream cross-sectional plane. This is characteristic of a vortex breakdown. The non-dimensional velocity profiles show no significant variation with the variation in Reynolds number.     

Numerical analysis of homogeneous mixture formation for a direct injection liquid LPG engine

A method to form a homogeneous mixture using low pressure direct injection of liquid phase LPG, pent-roof combustion chamber, flat-top piston and center-located injector layout is presented. To validate the method, the mixture formation processes in the cylinder were investigated using the CFD code. The effect of different injection timing and engine loads on the mixture formation processes were researched. The simulated results showed that, the intake tumble for high load conditions or the inclined intake swirl for part load conditions would break into small-scale vortex (turbulence) near the end of compression stroke, which enhanced the homogeneous mixture formation. The results also showed that if the liquid phase LPG was injected at 60–80°CA ATDC in intake stroke even at different loads, the homogeneous mixture would be formed under any engine load conditions.     

Review on characterization of nano-particle emissions and PM morphology from internal combustion engines: Part 2

This paper presents a review of the characterization of physical properties, morphology, and nanostructure of particulate emissions from internal combustion engines. Because of their convenience and readiness of measurement, various on-line commercial instruments have been used to measure the mass, number, and size distribution of nano-particles from different engines. However, these on-line commercial instruments have inherent limitations in detailed analysis of chemical and physical properties, morphology, and nanostructure of engine soot agglomerates, information that is necessary to understand the soot formation process in engine combustion, soot particle behavior in after-treatment systems, and health impacts of the nano-particles. For these reasons, several measurement techniques used in the carbon research field, i.e., highresolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and Raman spectroscopy, were used for analysis of engine particulate matter (PM). This review covers a brief introduction of several measurement techniques and previous results from engine nano-particle characterization studies using those techniques.     

Fatigue assessment of rear axle under service loading histories considering the strengthening and damaging effects of loads below fatigue limit

Accurately predicting the fatigue life is the basis for the reliability and lightweight design of automobile parts. However, the predicted lives under service loadings on the basis of the S-N curve from constant amplitude loads from existing methods often seems conservative compared with real lives, because of ignoring the strengthening effect of loads below fatigue limit. In this paper, a fatigue damage model, which is modification of Miner’s Rule, was established for the fatigue assessment under service loadings by means of taking into account the strengthening and damaging effects of loads below fatigue limit. Then this model and conventional Miner’s Rule are applied to the estimate the fatigue life of a torsion beam rear axle using the loading history recorded on proving ground. Finally, verification tests are performed on MTS road load simulator test bed. Results of predicted lives and fatigue tests demonstrate that the accuracy of the predicted life could be greatly improved by taking into account the strengthening and damaging effect of loads below fatigue limit.     

Pooling for the journey to work: The outlook in Great Britain

Pooling, or ride-sharing, is a term coined in the United States (U.S.) to describe various forms of collective travel organised for, and often by, specific groups of commuters with similar travel requirements. Its different forms include bus pooling (financially self-supporting works bus or commuter coach services), minibus pooling (van pooling in U.S. terminology) and car pooling. It has been claimed that these forms of collective travel offer a more personalised service than conventional stage carriage buses, and therefore have a greater chance of attracting solo car drivers and increasing vehicle occupancies. This, in turn, can lead to lower fuel consumption and reduced traffic congestion at peak times. Following the advent of oil shortages in the winter of 1973/74, considerable efforts were made in the U.S. to promote pooling initiatives. This gave rise to the publication of a substantial volume of literature that sometimes indicated significant resource-saving achievements. This paper considers the potential for bus, minibus and car pooling in Great Britain, drawing both on relevant theoretical and economic studies, and on practical operational experience. It concludes that under reasonable assumptions about the transport situation in the next decade or so, pooling could become increasingly useful for solving the travel problems of individual local groups, but that it is unlikely to become a major mode in terms of the numbers of trips carried. The effects of recent legislative changes are discussed, and the justification for further change assessed. Relevant comparisons are made with the U.S.Crown Copyright 1983. Extracts from the text may be reproduced, except for commercial purposes, provided the source is acknowledged.     

The comparison of general cargo ship economic performance by simulation

Cargo ship designs offered by shipbuilders differ in characteristics such as deadweight, speed, fuel consumption and cargo equipment. The best vessel for high freight markets and high fuel prices may not be the best for low freight markets and low fuel prices. A model has been developed to compare by simulation a number of multi-purpose general cargo vessels suitable for the trade of a Turkish shipowner. The model simulates the operation of each vessel under a variety of operating scenarios, e.g. fuel prices and freight profiles over the ships' lives, and estimates the distribution of resulting net present values. The techno-economic simulation model incorporates variables including ship size, speed, first cost, fuel consumption, load factor and port days.

Results are presented for six standard vessels of around 20 000 dwt operating over a long and a short route. Although the ranking of the six varies with assumptions, one design is shown to be superior under most operating conditions.