沥青混合料级配曲线研究进展

级配曲线是由富勒模型中最大粒径和形状系数两个参数来确定的,富勒模型能够很好地拟合使用性能良好的级配.级配曲线图是由形状系数和最大粒径组成的直角坐标系,它可以表示出级配范围、砂石比和相关的性能参数.该文分析了Superpave沥青混合料力学和水稳性能的试验结果,提出了根据级配曲线推荐的集料设计出满足路面各项性能的自由设计理念.     

LEISHMANIA PROMASTIGOTES EVADE INTERLEUKIN 12 INDUCTION BY MACROPHAGES AND STIMULATE A BROAD RANGE OF CYTOKINES FROM CD_（4）~（＋

ＬＥＩＳＨＭＡＮＩＡＰＲＯＭＡＳＴＩＧＯＴＥＳＥＶＡＤＥＩＮＴＥＲＬＥＵＫＩＮ１２ＩＮＤＵＣＴＩＯＮＢＹＭＡＣＲＯＰＨＡＧＥＳＡＮＤＳＴＩＭＵＬＡＴＥＡＢＲＯＡＤ　ＲＡＮＧＥＯＦＣＹＴＯＫＩＮＥＳＦＲＯＭ　ＣＤ_（４）~（＋）ＴＣＥＬＬＳＤＵＲＩＮＧＩ...     

Design and implementation of a UPnP-can gateway for automotive environments

In this paper, we propose a universal plug and play (UPnP) — controller area network (CAN) gateway system using UPnP middleware for interoperability between external smart devices and an in-vehicle network. The proposed gateway consists of a UPnP communication device, a CAN communication device, and a device translator layer. In-vehicle devices are not usually IP-based, so we implemented an in-vehicle device manager in the UPnP communication device which is in the gateway. We developed a vehicle simulator to produce real vehicular data for performance analysis. The CAN communication device transmits and receives real-time vehicle data between the real vehicular simulator and external devices through the UPnP. The device translator layer configures a message frame for enabling seamless data input and output between the CAN and UPnP protocols. After implementation, we generated an internal-external service request and tested the result. Finally, we confirmed the service request and operation between external devices and the internal vehicular device. Additionally, for a variety of external device numbers and communication environments, we demonstrated the gateway performance by measuring the round trip time (RTT) for overall service implementation.     

Optimal Preview Control of a Two-dof Vehicle Model Using Stochastic Optimal Control Theory

An optimal preview control algorithm is applied to a two degree of freedom(dof) vehicle model travelling with constant velocity on a randomly profiled road. The road roughness is modelled as a homogeneous random process being the output of a linear first order filter to white noise. The input from the road irregularity is assumed to be measured at some distance in front of the vehicle and this measured infonnation is utilized by the active controller to prepare the system for the ensuing input. The preview control algorithm is obtained by minimizing a quadratic performance index and by describing the average behaviour of the system by the covariance matrix of the vehicle response state vector. Results are presented for full state feedback and significant improvements in sprung mass acceleration, suspension working space and road holding are observed.     

Discrete Adaptive Active Suspension for Hardware Implementation

This paper presents a discrete adaptive control approach for an active suspension. The study involves formulation of an active suspension as a digital controller problem involving the time delays. A nonlinear time varying (NTV), single input single output (SISO) suspension model is considered for the analysis. A discrete model reference adaptive control (DMRAC) approach with recursive least square (RLS) estimation is used to form the controller. The controller is designed to maintain the static equilibrium irrespective of dynamic load variations as a disturbance force on the model. Simulation results for deterministic and stochastic inputs are presented to substantiate the approach. Results indicate good performance of adaptive controller even for large dynamic variations of the model and has the potential for a successful hardware implementation.     

3-D numerical and experimental analysis for airflow within a passenger compartment

People use cars so frequently that they always consider the air-conditioning, and thermal comfort of the driver and passenger when buying a new car. Therefore accurate simulation of the thermal performance of automobile air conditioners to improve human comfort has become increasingly important. In order to improve the thermal comfort of passengers, 3-D flow motion and thermal behavior within vehicles must be analyzed. In this paper, a numerical simulation was used to investigate thermal behavior in a vehicle. Because air temperature at an air vent is related to the cooling capacity of the air conditioner, the cooling capacity was calculated using ɛ-NTU (effective number of transfer unit) theoretical equations. Using the air temperature relationship between inlet and outlet vents as boundary conditions, a 3-D unsteady κ-ɛ turbulent model was used to give a transient analysis simulation of the temperature field and flow conditions in a vehicle’s passenger cabin. Cooling cycle analysis and conjugate heat transfer analysis at the inside surface of the cabin’s ceiling, floor and sides were also considered. The predicted temperature distributions in the vehicles passenger cabin were in good agreement with those obtained experimentally.     

Effect on friction of engine oil seal with engine oil viscosity

Low viscosity engine oil can improve a vehicle’s fuel economy by decreasing the friction between the engine components. Frictional torque varies with the velocity change due to different viscosity characteristics of SAE grade 5W-20, 5W-30 and 5W-40 engine oils. The viscosity for each of these grades was measured to outline the effect low viscosity engine oils have on engine friction, which may lead to improved fuel economy. Engine oil seal frictional torque increases with the shaft rotational speed for all three engine oil grades. A decrease in engine oil seal frictional torque was confirmed when low viscosity engine oil was used. Also, the leak-free performance of the engine oil with the seal satisfied the life limit durability test criteria. Thus, low viscosity engine oil may be used to improve fuel economy by decreasing the frictional loss of the engine oil seal while having no negative impact on performance due to leak-free functioning.     

Parameter identification for a LuGre model based on steady-state tire conditions

The purpose of this study was to effectively identify parameters for a LuGre friction model based on experimental measures. In earlier work related to this study (Yang et al., 2009), which was based on the characters of polygonal wear (Sueoka and Ryu, 1997), we showed a frictional vibration model for a mass on a moving belt. This model reflected lateral vibrations caused by velocity and toe-in angle. An important aspect of the present study is the improved friction model. A previous friction model, which divided the process into four parts, expressed the sable excited vibration well but failed to reflect the hysteresis loop change when vehicles accelerated or decelerated continuously. A LuGre friction model can solve this problem, but several model parameters must be obtained experimentally. We measured contact width and length of tires as vertical pressure changed; this provided a theoretical basis for apparent stiffness of a unit of tire tread. Based on tire data from Bakker E’s article in a SAE paper from 1987, we identified the Stribeck exponent and Stribeck velocity in LuGre. Then, the results were implemented in a vibration system that verified the rationality of the data.     

Development of a low-noise cooling fan for an alternator using numerical and doe methods

An alternator, which converts mechanical rotational energy into electrical energy, is an important component of a vehicle. Alternators operate over a broad range of rotational speeds, typically from 3,000 RPM to 18,000 RPM, which demands a cooling fan producing sufficient airflow, ideally with a minimum of noise. In the current study, an optimized alternator-cooling fan was developed through a linked DOE(Design OF Experiment) process and numerical analysis. The SC/Tetra and FlowNoise S/W programs were used to calculate flow rates and noise levels, respectively, for the newly developed fan. Compared with original model, the numerical results predicted a 3 dBA noise reduction; the measured reduction was 4 dBA.     

Two-Dimensional Motion of Vehicles Damaged due to Collision

This paper deals with two-dimensional motion analysis of vehicles damaged due to collision. Various parts of vehicles are damaged due to collision in general. The effects of the damage in vehicle body and wheels on the vehicle motions are investigated. The center of gravity of the vehicle and the polar moment of inertia are changed by the deformation of vehicle body. Furthermore, the geometrical relations of wheels like wheelbase, treads and steering angles may be changed by damage of the wheels. Thus the vehicle loses symmetry with respect to the vehicle axis. The four-wheel vehicle model is extended to take into account the vehicle damage due to collision. The motions of damaged vehicles are compared with those of undamaged vehicles. It is found that vehicle damages have a significant influence on vehicle motion after impact.