REGULATION OF PRODUCTION OF PARATHYROID HORMONE－RELATED PEPTIDE （PTHrP） AND EXPRESSION OF ITS mRNA IN A HUMANLIVER－DERIVED CE

ＲＥＧＵＬＡＴＩＯＮＯＦＰＲＯＤＵＣＴＩＯＮＯＦＰＡＲＡＴＨＹＲＯＩＤＨＯＲＭＯＮＥ－ＲＥＬＡＴＥＤＰＥＰＴＩＤＥ（ＰＴＨｒＰ）ＡＮＤＥＸＰＲＥＳＳＩＯＮＯＦＩＴＳｍＲＮＡＩＮＡＨＵＭＡＮＬＩＶＥＲ－ＤＥＲＩＶＥＤＣＥＬＬＬＩＮＥＬｉＨｕｓｏｎｇ；Ｐ...     

Time-series model for vehicle speeds

This paper presents a time-series model for the spot speeds of vehicles on a road section. Based on time-series analysis techniques, the model incorporates information on the extent of existing dependency between the speeds of successive vehicles. The model for the data is chosen while relying heavily on the data, and thus emphasis is given to their special characteristics. The advantages of using the model are examined with regard to the relative speed of two successive vehicles along a road section. The results are compared with those obtained by using a model of independent observations; fewer errors are obtained with the time-series model. Therefore, it is concluded that the sequence of speed observations contains valuable information which should be incorporated into speed models.     

Further evidence on the temporal stability of disaggregate travel demand models

Current evidence on the transferability of disaggregate travel demand models is inconclusive. Adding to this body of research, the present analysis focuses upon the temporal characteristics of work trip behavior in the San Francisco Bay Area. Using before and after data sets associated with the BART Impact Travel Study, multinomial logit models of work trip modal choice are estimated. The results indicate that the general form and the coefficient estimates of a pre BART model are transferable in time. Moreover, when updated to reflect BART's presence, the model's predictive success and its implied elasticity measures are generally accurate, relative to those implied by reestimating the entire model on post BART data. Finally, as economic theory would predict, elasticity measures of the service related variables were found to increase over time.     

Model-based analysis of the mechanical subsystem of an air brake system

Most commercial vehicles such as buses and trucks use an air brake system, often equipped with an S-cam drum brake, to reduce their speed and/or to stop. With a drum brake system, the clearance between the brake shoe/pad and the brake drum may increase because of various reasons such as wearing of the brake shoe and/or brake drum and drum expansion caused by high heat generation during the braking process. Hence, to ensure proper functioning of the brake system, it is essential that the clearance between the brake shoe and the brake drum is monitored. In this paper, we present a mathematical model for the mechanical subsystem of the air brake system that can be used to monitor this clearance. This mathematical model correlates the push rod stroke transients and the brake chamber pressure transients. A kinematic analysis and a dynamic analysis of the mechanical subsystem of the air brake system were performed, and the results are corroborated with experimental data.     

Modelling and control of a new differential steering concept

This paper presents a new steer-by-wire concept using an all-wheel drive vehicle layout with in-wheel motors while completely omitting the application of any dedicated steering device. Steering is based on the so-called differential steering principle which generates the necessary steering moment about the kingpins by a traction force difference between left and right sides of the vehicle. In order to investigate the behaviour of the vehicle and to design the underlying control algorithms, a planar vehicle model is presented, where the vehicle is described as constrained non-holonomic system requiring a special treatment. A state feedback linear controller for controlling of the lateral dynamics of the vehicle at higher speeds and a simple PI angle controller for low-speed manoeuvring are developed. The resulting behaviour of the system is investigated by various simulation experiments demonstrating a comparable steering performance of the new steering concept as that of conventional passenger cars.     

Fast passenger ferries and their future

This papers examines the different choices of High Speed Craft (HSC) hull design available and briefly looks at the advantages and disadvantages of each hull form. The trends in various design aspects of HSC such as speed, capacity and size are studied. An investigation on the HSC development is conducted and the future of HSC in the UK is studied. A study onboard an HSC with the aim of trying to determine what passengers think of HSC and why they travel by them is also conducted. Finally, an analysis of the possible market for HSC is carried out.     

Efficiency and ecological characteristics of a VCR diesel engine

Compression ratio (CR) is a design parameter with highest influence on efficiency, emission and engine characteristics. In conventional internal combustion (IC) engines, the compression ratio is fixed and their performance is, therefore, a compromise between conflicting requirements. One fundamental problem is that drive units in the vehicles must successfully operate at variable speed and loads and in different ambient conditions. If a diesel engine has a fixed CR, a minimal value must be chosen that can achieve a reliable self-ignition when starting the engine in cold start conditions. In diesel engines, variable compression ratio (VCR) provides control of peak cylinder pressure, improves cold start ability and low load operation, enabling the multi-fuel capability, increase of fuel economy and reduction of emissions. By application of VCR and other mechanisms, the optimal regime fields are extended to the prime requirements: consumption, power, emission, noise, etc., and/or the possibility of the engine to operate with different fuels is extended. An experimental Diesel engine has been developed at the Faculty of Engineering, University of Kragujevac. The changes of CR are realized by changing the piston chamber diameter. Detailed engine tests were performed at the Laboratory for IC engines. Special attention has been given to decrease of fuel consumption and exhaust emissions. An optimal field of CR variation has been determined depending on the given objectives: minimal fuel consumption, minimal nitric oxides, and particulate matter emissions, etc.     

Methodology for the accuracy improvement of FEM beam type T-junctions of buses and coaches structures

The analysis of structures with finite elements methods (FEM) represents a widely spread technique. For large tubular structures similar to the buses and coaches upper structures, beam type elements are utilized due to the fact that these elements provide satisfactory results at relatively reduced computational performances. However the beam type elements have a main disadvantage determined by the fact that the modeled joints have an infinite rigid behavior. This shortcoming determines a stiffer behavior of the modeled structures which translates into an error source for the structural simulations (up to 45%). To overcome this problem, a simple methodology was conceived and an alternative optimized equivalent beam model obtained. The methodology studies the behavioral characteristics of beam modeled T-junctions determining their limitations and comparing them to equivalent T-junctions modeled with shell and volume elements. This way an improved Tjunction has been obtained, in which the behavioral error was reduced to less than 5%. Furthermore the FEM obtained results were validated with real T-junctions.