Using a random displacement model to simulate turbulent particle motion in a baroclinic frontal zone: A new implementation scheme and model performance tests

Numerical artifacts can limit accurate simulation of turbulent particle motion when Lagrangian particle-tracking models are implemented in hydrodynamic models with stratified conditions like fronts. Yet, modeling of individual particle motion in frontal regions is critical for understanding sediment dynamics as well as the transport and retention of planktonic organisms. The objective of this research was to develop a numerical technique to accurately simulate turbulent particle motions in a particle-tracking model embedded within a hydrodynamic model of a frontal zone. A new interpolation scheme, the ‘water column profile’ scheme, was developed and used to implement a random displacement model for turbulent particle motions. A new interpolation scheme was necessary because linear interpolation schemes caused artificial aggregation of particles where abrupt changes in vertical diffusivity occurred. The new ‘water column profile’ scheme was used to fit a continuous function (a tension spline) to a smoothed profile of vertical diffusivities at the x–y particle location. The new implementation scheme was checked for artifacts and compared with a standard random walk model using (1) Well Mixed Condition tests, and (2) dye-release experiments. The Well Mixed Condition tests confirmed that the use of the ‘water column profile’ interpolation scheme for implementing the random displacement model significantly reduced numerical artifacts. In dye-release experiments, high concentrations of Eulerian tracer and Lagrangian particles were released at the same location up-estuary of the salt front and tracked for 4 days. After small differences in initial dispersal rates, tracer and particle distributions remained highly correlated (r = 0.84 to 0.99) when a random displacement model was implemented in the particle-tracking model. In contrast, correlation coefficients were substantially lower (r = 0.07 to 0.58) when a random walk model was implemented. In general, model performance tests indicated that the ‘water column interpolation’ scheme was an effective technique for implementing a random displacement model within a hydrodynamic model, and both could be used to accurately simulate diffusion in a highly baroclinic frontal region. The new implementation scheme has the potential to be a useful tool for investigating the influence of hydrodynamic variability on the transport of sediment particles and planktonic organisms in frontal zones.     

Use of an activity-based diary to collect household travel data

The paper describes the results of a pilot survey that used a one-day activity diary to collect origin-destination data, as opposed to a travel-based diary. The design of the diary is discussed, together with a comparison to a more conventional travel diary. The paper examines the extent to which the activity diary appears to have been capable of collecting good travel data that is at least comparable to travel diary efforts. In addition, a substantial portion of the paper is concerned with a comparison of the retrieval methods for the diaries. Two alternative methods were pilot-tested, one being the use of telephone retrieval and the other being mailback retrieval. Although the pilot test used small samples, the evidence appears to be strong that mailback is preferable to telephone retrieval, while telephone retrieval did not seem capable of providing some of the benefits often ascribed to it.     

Performance Potential and Power Consumption of Slow-Active Suspension Systems with Preview

Two possible layouts of a slow-active suspension model are analysed. Optimal control laws for different actuator bandwidths and various amounts of road preview are generated, and estimates of power consumption are made. Higher bandwidth systems (10Hz) require less preview to obtain a given level of performance than those with a lower bandwidth (3Hz) but use more energy in doing so. Similar performance is available from the two systems considered, although the second uses considerably less energy to obtain that performance.     

Quantifying erosion rates and stability of bottom sediments at mussel aquaculture sites in Prince Edward Island,Canada

Downward fluxes of organic biodeposits under suspended mussel culture cause benthic impacts such as microbial mat production. Quantifying sediment erosion in these coastal ecosystems is important for understanding how fluxes of organic matter and particulates contribute to benthic–pelagic coupling. Critical shear velocity (u?), erosion rates and particle size distributions of resuspended sediment were measured at two sites; an impacted muddy site with extensive mussel culture (site 1), and a coarser sandier site with less mussel influence (site 2), using a new method for assessing sediment erosion at Tracadie Bay, Prince Edward Island in August 2003. Shear forces were generated by vertically oscillating a perforated disc at controlled frequencies. These forces correspond to shear velocity, using a re-designed and calibrated Particle Erosion Simulator. Undisturbed sediment cores obtained by divers and grab (sub-cored using a Plexiglas? cores) were exposed to shear stress to compare differences between collection methods. Microbial mats were present at site 1 which initially biostabilized sediment against erosion due to ‘armoring’ of the sediment, but onset of erosion was abrupt once these mats failed. Erosion sequences at site 2 (without mat cover) were smoother resulting in less material being eroded. Mean mass of material eroded was 47 and 23 g m^? 2 min^? 1 at sites 1 and 2 respectively. Mat area cover and shear velocity was strongly related. Critical shear velocities varied between 1.70 and 1.77 cm s^? 1, with no obvious differences between location or collection method, so sediments from these two contrasting sites had identical mean critical shear velocities. Significant differences existed in the concentrations of chlorophyll a, colloidal and bulk carbohydrates, between mats and bare sediment from site 1. Particle sizes measured by videography of resuspended sediment at different shear velocities ranged from 100 μm (the minimum diameter capable of being detected by the system), to large mat fragments of 1700 μm for both sites. These results provide evidence of the relevance of using a portable erosion device to indicate how sediment erodability is affected by mussel–microbial relationships.     

机车轴悬式电机悬挂齿轮副变形的三维有限元分析

本文用三维有限元方法对东风_4型内燃机车的整个牵引电机传动系统进行了计算。其计算模型利用假想的二力杆连接齿轮副的啮合点,人为地造成了均匀传递啮合力的力学条件,从而计算出了合理的齿轮修形量。     

Changes in the relationships between transport,communications and urban form

Transport, communications and urban form cover an overlapping area of rising academic and practical concern. This paper traces several of the many themes brought together under different professional banners, and shows how a confluence of interest is emerging.The themes are the developments in urban planning analysis, transport and time use studies, telecommunications and industrial location, all of which contribute to the area of locational effects of improved telecommunications technology, and are affected by alterations in the nature of work and the uses made of time by individuals. The convergence of geographical, planning, transportation and communication developments now requires explicit investigation, as the timings of technological and theoretical developments appear to coincide with the emergence of a significant need to do so. Some of the gaps between present knowledge and expertise that need to be filled are specified.These include the investigation of the testing and use of current land use integrated analyses for road and development assessment, investigation of the nature and characteristics of work and education which are most affected by telecommunications and computer support, development of longitudinal monitoring methods for overall urban development leading indicators, exploitation of newly-available cross-sectional household and city data sets in conjunction with historical data for longitudinal investigations and forward projections, accounting for altered family structure and activity patterns and the anticipation and assessment of probable further technological change, which can and will undermine many current long term commitments.     

Overturning Stability of Three Wheeled Motorized Vehicles

Three wheeled motorized vehicles are a major mode of public transport in many countries. These vehicles are prone to overturning even during normal turning and obstacle avoidance maneuvers. This paper presents a parametric analysis of a mathematical model of the vehicle and evolves guidelines for improving the overturning stability in terms of vehicle geometry and suspension properties.

Differential equations governing the dynamic behavior of the vehicle are derived on the basis of a six degree of freedom model. The vehicle response to variations in steering, engine power and braking inputs is then numerically simulated. The effects of vehicle geometry and elasto-damping suspension coefficients on the vehicle stability are presented. The results indicate an optimum position of the center of gravity where the vehicle is most stable. While stiffer suspensions favour stability, there exists an optimum value of suspension damping for which the minimum wheel load is a maximum.     

Effects of Operational and Design Parameters on the Sequence of Locking of the Wheels of Tractor-Semitrailers

It is known that loss of directional stability during braking occurs in many road accidents involving tractor-semitrailers. To minimize the undesired directional response, the correct order of locking of the wheels is of importance and should receive greater attention. This paper examines the effects of operational and design parameters on the sequence of locking of the wheels of tractor-semitrailers. The way in which the correct locking sequence may be achieved is also discussed in detail.