Shared pilot passage plan and navigational safety during pilotage

Navigating in confined waters with a pilot aboard requires that the pilot’s intention and plan is understood by all present on the bridge. The present study investigates the effect of having a detailed route plan and monitoring it in the context of pilotage. The aim was to see how the presence of a shared pilot passage plan in the Electronic Chart Display and Information System (ECDIS) affects the identification and recovery from navigational errors made by a pilot. Twenty participants, 10 with a shared route plan and 10 without, participated as navigators in a simulator scenario involving pilotage in the Oslofjord. Participants were bachelor students in nautical science. The navigation scenarios involved the intentional error by the pilot just before a predefined way point. Three measurements of relevance to navigational safety were recorded: (1) the time it took the participant to express concern, (2) the time it took the participant to correct the error (‘time to recovery’), and (3) the number of groundings. The study revealed that time to express concern and time to recovery were significantly much shorter for the group with a shared pilot passage plan presented in ECDIS than for the group without such a plan. Providing a bridge team with a shared pilot passage plan in ECDIS during pilotage might improve the ability to identify and correct navigational errors.     

Regularity analysis on transient over-voltage of grounding grid by lighting strokes in substationsEI北大核心

Research purposes: Lightning has been one of the important factors endangering safe and reliable operation of the railway. The grounding grid performance plays a particularly important role in lightning protection. In this paper, the author has established a grounding grid transient model by the electromagnetic transient analysis software and intended for quantitative analysis of typically grounding grid layout in engineering practice, to lay important theoretical basis for future lightning protection and grounding. Research conclusions: (1) The results show that the ground potential is significantly affected by the soil resistivity, lightning current amplitude and the mesh size. With increase of the soil resistivity and lightning current amplitude, the ground potential at the point of the lightning current injection will significantly improve, but due to the spark discharge of the soil. The ground potential does not increase exponentially with potential lightning current amplitude. The smaller the mesh size, the better the ground potential attenuation. For example of the lightning current 20 kA and the soil resistivity 100 Ω·m, the ground potential of the 5 m×5 m mesh decreases 22.3% compared with the 10 m×10 m mesh. (2) The study finds that the ground potential attenuation away from the lightning strike point at 15 m basically reaches the maximum, which is about 89%. And the degree of attenuation is independent of lightning current amplitude. (3) The results are mainly used for optimization program and design fields on substation lightning protection and grounding.     

Transient design waves for green-water loading on bulk carriers

The wave surface profiles associated with extreme relative motion between a slender stationary vessel and the adjacent wave surface are investigated for long-crested head seas. The methodology is based upon an established statistical relationship for a Gaussian random process which indi-cates that in the vicinity of an extreme event the most probable shape of the time history approaches that of the autocorrelation function. Attention is given to the relative motion at a longitudinal position which is representative of the No. 1 hatch cover location on a bulk carrier. Second-order corrections to the wave surface profiles are used to provide estimates of nonlinear relative motions. It is shown that extreme relative motion at the hatch cover location is associated with the vessel encountering a steep-fronted wave with pronounced asymmetry in the horizontal and vertical directions. In order to evaluate the exceedence probabilities, it is hypothesized that the peaks of the nonlinear relative motions are closely correlated with the peaks of an underlying linear process. The overall methodology is applied to an investigation of relative motion exceedence probabilities for vessel lengths of 250 m and 300 m over a range of survival seastates. Received: July, 1999 / Accepted: November, 1999     

Transport of radionuclides by sea-ice and dense-water formed in western Kara Sea flaw leads

A transport assessment of particle-bound and dissolved artificial radionuclides (¹³⁷Cs and ^239,240Pu) by sea-ice and dense-water formed in western Kara Sea flaw leads close to the Novaya Zemlya dumping sites is presented in this study. We both performed a “best estimate” based on available data, and a “maximum assessment” relying on simulated constant releases of 1 TBq ¹³⁷Cs and ^239,240Pu from individual dumping bays. The estimates are based on a combination of (i) the content of particulate matter in sea-ice; (ii) analytical data and numerical simulations of radionuclide concentrations in shelf surface deposits, suspended particulate matter (SPM), and the dissolved phase; and (iii) estimates of lead-ice and dense-water formation rates as well as modeling results of local ice drift pathways. In the “best estimate” case, 2.90 GBq ¹³⁷Cs and 0.51 GBq ^239,240Pu attached to sea-ice sediments can be exported from the lead areas toward the central Arctic basin. The radionuclide burden of the annually formed dense lead water in the “best estimate” amounts to 4.68 TBq ¹³⁷Cs and 0.014 TBq ^239,240Pu. In the “maximum assessment”, potential export-rates of ice-particle bound ¹³⁷Cs and ^239,240Pu toward the central Arctic would amount to 0.64 and 0.16 TBq, respectively. As much as ≈900 TBq ¹³⁷Cs and ≈6.75 TBq ^239,240Pu could be annually taken up by 34.75 dense-water rejected in the lead area. Assuming the (unlikely) instantaneous release of the total ¹³⁷Cs and ^239,240Pu inventories (≈1 PBq and 10 TBq, respectively) from the Novaya Zemlya dumping sites into the dissolved phase, the dense lead water locally formed during one winter season could take up ≈90% of the Cs and ≈68% of the Pu released.     

加铺沥青面层在路面改造中的应用研究

本文以316国道孝感南大互通至毛庙段路面改善工程第二合同段的路面改造为工程实例,从旧路的路况调查、病害处理、沥青面层的设计、施工工艺的控制等方面,介绍了如何减少和防止沥青路面出现反射裂缝、车辙、水损害等早期病害。     

Dynamic response of offshore jacket structures under random loads

In this paper, the dynamic response of a scale model of a jacket offshore structure is investigated both theoretically and experimentally. The experiments were conducted both in air and in water. The in-water experiments were done in the towing tank of Memorial University to simulate the realistic operating conditions. The model was subjected to random wave loads. Froude's law of modeling was used to obtain the dimensions of the scale model based on the dimensions of an existing structure. The effects of varying the structure's weight, and the characteristics of the wave loading were investigated. The structure's weight was changed by adding weights to the structure's deck. A finite element model was designed to determine the dynamic response of the model. Excellent agreement between the experimental and theoretical results was obtained.The reaction force at the foundation was estimated from strain measurements and compared with the finite element calculations. Fair agreement was obtained.This work is the first stage of a project whose objective is to develop a method for structural damage detection using the free vibration response of the structure. The free vibration response will be obtained from the stationary random response of the structure using the random decrement method. Having an accurate model to describe the dynamic response of the structure is the first step in this study.     

Tests on ultimate strength of hull box girders made of high tensile steel

The experimental results of the collapse of three box girders subjected to pure bending moment are presented. The structures are made of high tensile steel of 690 MPa of nominal yield stress reinforced with bar stiffeners of the same material. The moment curvature curves are presented covering the pre- and post-collapse regions. The modes of collapse for each box girder are discussed considering the variation on the panel's slenderness. The concept of efficiency of high tensile steel structures is introduced. The concept is very useful to identify the governing parameters affecting the ultimate strength of 3D structures under predominant bending moment.     

Sampling of alternatives for route choice modeling

This paper presents a new paradigm for choice set generation in the context of route choice model estimation. We assume that the choice sets contain all paths connecting each origin–destination pair. Although this is behaviorally questionable, we make this assumption in order to avoid bias in the econometric model. These sets are in general impossible to generate explicitly. Therefore, we propose an importance sampling approach to generate subsets of paths suitable for model estimation. Using only a subset of alternatives requires the path utilities to be corrected according to the sampling protocol in order to obtain unbiased parameter estimates. We derive such a sampling correction for the proposed algorithm.Estimating models based on samples of alternatives is straightforward for some types of models, in particular the multinomial logit (MNL) model. In order to apply MNL for route choice, the utilities should also be corrected to account for the correlation using, for instance, a path size (PS) formulation. We argue that the PS attribute should be computed based on the full choice set. Again, this is not feasible in general, and we propose a new version of the PS attribute derived from the sampling protocol, called Expanded PS.Numerical results based on synthetic data show that models including a sampling correction are remarkably better than the ones that do not. Moreover, the Expanded PS shows good results and outperforms models with the original PS formulation.