炎热天气对钢渣混凝土抗压强度的影响

将普通混凝土和钢渣质量分数为10％、30％和50％的混凝土试件分别放入40℃、50℃和60℃的热水中,测试了不同龄期试件的抗压强度和超声波脉冲速度,分析了炎热天气对钢渣混凝土抗压强度的影响.分析结果表明:在测试龄期内,各混凝土试件的抗压强度并不随着炎热天气的影响而发生削减;钢渣混凝土试件在第90 d达到最高抗压强度61...     

Minimum Efficient Scale (MES) and preferred scale of container terminals

The decision on the scale of a port terminal affects the terminal’s managerial, operational and competitive position in all the phases of its life. It also affects competition structures in the port in which the terminal is operating, and has a potential impact on other terminals. Port authorities and terminal operators need to know the scale of the terminal when engaging in concession agreements. In economic theory the scale of a plant/firm is typically defined in relation to the Minimum Efficient Scale (MES), the long-run output where the internal economies of scale are fully exploited. However, there are a number of theoretical and empirical indications that in ports the scale of a terminal is commonly guided by a combination of the MES and other determining factors. The “preferred” scale is the result of a complex interaction between the MES, the port governance framework and objectives, the market size and structure, technological change and operational considerations, physical and geographical limitations, and the business patterns of shipping lines. This study analyses the factors resulting in a preferred container terminal scale that in most of the times is different from the MES. The analysis of the technical, market-related and governance-related factors is supported by theoretical and empirical insights that illustrate the presence of a range of actual ”preferred” scales of terminal concessions that usually are different, below or above, MES.     

Strategic alliances in container liner shipping

The economic crisis in the years between 2008 and 2010 has demonstrated the necessity for substantial adjustments on behalf of container lines. Capacities were shifted quickly to emerging and less affected markets allowing a faster recovery of globally organized companies. This paper illustrates the dynamics in the container shipping market. Alongside the main characteristics of the Top 20 ocean shipping companies, liner services are described. These services are classified by geographic coverage and vessel deployment. In addition, this paper provides a better understanding of the collaboration among service providers. Starting from a general framework of co-operative liner services, in-depth analyses of the global alliances in liner shipping are obtained. These formations - Grand Alliance, New World Alliance and CKYH Alliance - are compared with alternative forms of collaboration in the liner shipping industry. The analysis of alliance announcements which are related to operational and strategic changes indicates that the “global alliances” cannot be regarded as closed corporate-like entities. In effect, service agreements are not only negotiated with the focal members of the specific alliance. Instead, every service is arranged individually and under specific conditions. By understanding the dynamics within alliances, we are able to develop an assessment relating to the stability of collaborations. Ultimately, these insights direct us to several paths for future research.     

软土地基水下真空预压固结离心模型试验

采用新发明的真空吸水系统应用于离心机中,可以使土体产生向上渗流并模拟软土地基真空预压。为获得理想的水下真空预压固结对比效果,竖井采用2种不同井间距的砂井,密封膜采用完全覆盖的形式。用发明的装置产生水下真空得以模拟软土水下固结行为。介绍了模型制作、试验程序及真空发生系统,并分析了孔隙水压力、变形、不排水剪切强度的改变和不同井间距对固结速率的影响。     

电磁仿真技术在异步牵引电机转子优化设计中的应用

针对解析法无法对电机转子局部结构导致的损耗和励磁电流进行定量分析的问题,文章提出在采用解析法进行初步方案计算的基础上,引入电磁仿真技术,并以190 kW异步牵引电机为例,分析和计算了附加损耗以及空载电流随通风孔数量的变化,通过试验验证了采用电磁仿真技术的有效性.     

基于纸纤维改性的隧道工程透水砂浆性能研究北大核心CSCD

为提出一种适用于隧道初期支护基面找平并且具有一定透水性能的砂浆,将纸纤维加入砂浆试块中对其性能进行改性。通过分析纸纤维的降解原理,并将不同掺量的纸纤维加入砂浆试块中,对其体积密度、吸水率、抗压强度等基本性能指标及微观结构进行测试和分析。由试验结果可知:在碱性环境中,纸纤维具有可降解的性能特点;纸纤维可以使普通砂浆试块的吸水率提升2~3倍,同时也会造成砂浆试块的体积密度和抗压强度降低;对砂浆试块吸水率和抗压强度进行线性拟合后发现其吸水率和抗压强度呈现负相关关系。研究结果表明,通过纸纤维对砂浆进行透水性能的提升是可行的,但是纸纤维掺量对砂浆其他性能的影响还有待进一步研究。     

Direct resolution of the pitch of DNA on positively charged lipid bilayers by frequency-modulation AFM

High resolution structural studies of DNA and DNA binding proteins by atomic force microscopy (AFM) require well-bound samples on suitably flat substrates. Adsorbing the DNA onto a positively charged supported lipid bilayer has previously been shown to be a potentially effective strategy for structural studies with AFM. Here, using our home-built frequency-modulation AFM (FM-AFM), we show that these bilayer substrates are only maximally effective for high resolution AFM when the samples are short, linear DNA, compared with circular plasmid DNA. We find that, with the former sample, the measured width of the DNA is about 2 nm, the known DNA diameter, and there is a clear height modulation along the length of the DNA with a periodicity of about 3.4 nm, in excellent agreement with the known pitch of the double helix. This sample preparation strategy is expected to enable higher resolution studies of DNA and DNA binding proteins with FM-AFM than that can presently be achieved.     

Origin–destination synthesis for aviation network data: examining hub operations in the domestic and international US markets

Hub‐and‐spoke networking is a key feature of current aviation markets in which hubs, as connecting points, function to consolidate and redistribute flows. This indicates that observation of traffic on a segment does not necessarily convey information about the origin to destination routing of passenger journeys because of the unavoidable detours in the system. This paper examines the heterogeneity of the flow composition in domestic and international US markets, which in turn allows us to observe the variation of operations across major hubs. A modified Route Flow Estimator for origin–destination synthesis (or origin–destination matrix estimation) is designed to decompose the segment traffic into itinerary‐based passenger trips. Several public and commercial databases, which are easily accessible, are exploited (and reconciled) for the model in order to (i) generate possible trip itineraries using those segment markets, and (ii) link data‐driven operational conditions with the underlying segment flows. The results are validated with US domestic trip observations and empirical knowledge related to the air transportation system. Then, the variability of the hub operations is examined based on sensitivity tests using the model parameters. From the resolution of itinerary‐based estimates, we observe that major airports' hub operations are spatially uneven, particularly with respect to domestic and international connecting passengers. Copyright © 2017 John Wiley & Sons, Ltd.