Design and shared use of a terminal departure lounge for new large aircraft operations

New Large Aircraft (NLA) are new aircraft developments larger than any existing aircraft. The NLA's higher seat capacity will significantly impact passenger terminal design and operations. This paper focuses on the issues regarding the departure lounge. Deterministic queuing theory is used to determine the size and seating configuration of the lounge, as well as to decide whether a second level should be built to accommodate the increase in the number of passengers. The paper also discusses the use of the satellite section of a pier‐satellite terminal as a single lounge for the NLA. Spreadsheets are used to implement the analyses.     

Auto-ignition and micro-explosion behaviors of droplet arrays of water-in-fuel emulsion

The characteristics of auto-ignition and micro-explosion behaviors of one-dimensional arrays of fuel droplets suspended in a chamber with high surrounding temperature were investigated experimentally with various droplet spacings, numbers of droplet and surrounding temperatures. The fuels used were pure n-decane and emulsified n-decane with varied water contents ranging from 10 to 30%. All experiments were performed under atmospheric conditions with high surrounding temperatures. An imaging technique using a high-speed camera was adopted to measure ignition delay, flame lifetime, and flame spread speed. The camera was also used to observe micro-explosion behaviors. As the droplet array spacing increased, the ignition delay also increased, regardless of water content. However, the lifetime of the droplet array decreased as the droplet spacing increased. The micro-explosion starting time remained unchanged regardless of the number of the droplets or the droplet spacing; however, it tended to be delayed slightly as the water percentage and droplet spacing increased.     

Thermal design of automobile exhaust based thermoelectric generators: Objectives and challenges

The potential for thermoelectric power generation (via waste heat recovery onboard automobiles) to displace alternators and/or provide additional charging to a vehicle battery pack has increased with recent advances in thermoelectric material processing. In gasoline fueled vehicles (GFVs), about 40% of fuel energy is wasted in exhaust heat, while a smaller amount of energy (30%) is ejected through the engine coolant. Therefore, exhaust-based thermoelectric generators (ETEG) have been a focus for GFV applications since the late 1980s. The conversion efficiency of modern thermoelectric materials has increased more than three-fold in the last two decades; however, disputes as to the thermal design of ETEG systems has kept their overall efficiency at limited and insufficient values. There are many challenges in the thermal design of ETEG systems, such as increasing the efficiency of the heat exchangers (hot box and cold plate), maintaining a sufficient temperature difference across the thermoelectric modules during different operating conditions, and reducing thermal losses through the system as a whole. This paper focuses on a review of the main aspects of thermal design of ETEG systems through various investigations performed over the past twenty years. This paper is organized as follows: first, the construction of a typical ETEG is described. The heat balance and efficiency of ETEG are then discussed. Then, the third section of this paper emphasizes the main objectives and challenges for designing efficient ETEG systems. Finally, a review of ETEG research activities over the last twenty years is presented to focus on methods used by the research community to address such challenges.     

Optimized design for a MacPherson strut suspension with side load springs

Undesired lateral force inevitably exists in a MacPherson suspension system, which is liable to damper rod’s side wear and promotes the damper’s inner friction decreasing the ride performance from the suspension system. Substituting a new side load spring with curved centerline for the conventional coil spring has been proven able to solve these problems and Multi-body Dynamics combining with Finite Elements Analysis may be an efficient method in optimizing its design. Therefore, taking a passenger car as example, a detailed multi-body dynamics model for the suspension system is built to simulate forces exerted on the damper and the minimization of its lateral component is selected as the design target for the spring. When the structure optimization of the side load spring is performed using FEA software ANSYS, its vertical and lateral elastic characteristics, supported by test data, are analyzed. After importing FEA results back to the suspension system, the dynamics simulation can be performed to validate the optimization result.     

Effect of fuel stratification on initial flame development: Part 2-low swirl condition

This paper is the second invstigation on the effect of fuel stratification on flame propagation. In the previous work, the characteristics under the no port-generated swirl condition, i.e., the conventional case was studied. In this work, the flame development under the low swirl condition was considered. For this purpose, the initial flame development and propagation were visualized under different axially stratified states in a modified optical single cylinder SI engine. The images were captured by an intensified CCD camera through the quartz window mounted in the piston. Stratification was controlled by the combination of the port swirl ratio and injection timing. These were averaged and processed to characterize the flame propagation. The flame stability was estimated by the weighted average of flame area and luminosity. The stability was also evaluated through the standard deviation of flame area and propagation distance and through the mean absolute deviation of the propagating direction. The results show that the flame-flow interaction determines the direction of flame propagation and that the governing roles of the two factors vary according to the stratified state and the location in the cylinder. In addition, the flame development and the initial flame stability are strongly dependent on the stratified conditions, and the initial flame stability is closely related to the engine stability and lean misfire limit. Lastly, there is no essential difference in gasoline and CNG flame propagation characteristics.     

Implementing a GPU-based numerical algorithm for modelling dynamics of a high-speed train

This paper discusses the initiative of implementing a GPU-based numerical algorithm for studying various phenomena associated with dynamics of a high-speed railway transport. The proposed numerical algorithm for calculating a critical speed of the bogie is based on the first Lyapunov number. Numerical algorithm is validated by analytical results, derived for a simple model. A dynamic model of a carriage connected to a new dual-wheelset flexible bogie is studied for linear and dry friction damping. Numerical results obtained by CPU, MPU and GPU approaches are compared and appropriateness of these methods is discussed.     

Collection, spillback, and dissipation in pedestrian evacuation: A network-based method

We present a method of predicting pedestrian route choice behavior and physical congestion during the evacuation of indoor areas with internal obstacles. Under the proposed method, a network is first constructed by discretizing the space into regular hexagonal cells and giving these cells potentials before a modified cell transmission model is employed to predict the evolution of pedestrian flow in the network over time and space. Several properties of this cell transmission model are explored. The method can be used to predict the evolution of pedestrian flow over time and space in indoor areas with internal obstacles and to investigate the collection, spillback, and dissipation behavior of pedestrians passing through a bottleneck. The cell transmission model is further extended to imitate the movements of multiple flows of pedestrians with different destinations. An algorithm based on generalized cell potential is also developed to assign the pedestrian flow.     

The social context of informal commuting: Slugs, strangers and structuration

Despite considerable interest in the role of social interactions and social context on transportation, there have been very few attempts to explore specific cases of social interaction influencing transportation systems. This paper explores the social practice of slugging, an informal system of carpooling in the Washington, DC area. Slugging emerged in response to the establishment of Virginia’s High Occupancy Vehicle (HOV) lanes in the early 1970s, as single drivers picked up riders alongside the road (slugs) in order to meet the requirements for driving in the less congested HOV lanes. Drawing on the work of sociologist Anthony Giddens, as well as the sociological insights of Georg Simmel and Stanley Milgram, we suggest that the practice of slugging highlights the processes of institutionalization and structuration. This paper details how the region’s mass transportation policies and urban culture have combined to result in an institutionalized practice with particular norms and logics of behavior. We conclude that looking at specific cases where social context has affected transportation, like slugging, could provide useful insights on the impact of social context on transportation policies and systems.     

American and European transportation responses to the 1973–74 oil embargo

A survey of U.S. and European responses to the energy crises engendered by the Arab boycott of October 1973–April 1974 is presented. U.S. Government policy actions with respect to allocation, rationing, price, and conservation measures are reviewed and contrasted with those of affected European governments. The results of those policies and their effects on transportation energy supply and demand behavior with respect to both commodity and passenger movement are described.Based on short- and long-term impact assessments of the policies considered, the authors identify significant research requirements.The authors were heavily engaged in U.S. responses to the energy emergency, and were asked to undertake study missions to those European nations significantly affected by the crisis to seek out avenues for mutual aid, and joint research, in resolving common energy problems. This paper is one product of those study missions.