Hydrodynamic response of a non-ship-shaped FPSO vessel with damping plates

Experimental and numerical hydrodynamic investigations were carried out on a 1:45 scale model of a novel non-ship-shaped floating, production, storage, and offloading (FPSO) vessel that has been designed for use in the icy waters of the Arctic as well as the severe sea states of the North Sea. This FPSO vessel has a turret mooring system that is disconnectable during emergencies and inclement weather conditions. Experiments were conducted on a 1:45 scale model of the FPSO with damping plates consisting of skirt plates and different sizes of keel plates in order to study their influence on the response of the vessel. A numerical study of the scale model was carried out using the Wave Analysis at Massachusetts Institute of Technology code, and the results provided by it were compared with those obtained from model tests in the wave basin.     

An overview of biodiesel in Asian countries and the harmonization of quality standards

Recently, biofuels have been actively introduced as transportation fuels in Asian countries. Common drivers to use biofuels are energy security, fuel diversification, and the reduction of greenhouse gases. In addition, some Southeastern Asian countries look forward to utilizing the abundant agricultural resources and providing stability for farmers. However, a compromised quality of biofuels could cause vehicle trouble, which is why the quality standard of the fuels is very important. On the other hand, the quality standard of biofuels differs from country to country and could cause vehicle trouble in some countries and not others. These differing standards may become an obstacle to trade. In this situation, the harmonization of the biodiesel standards in the East Asia Summit (EAS) region has been initiated by the ERIA biodiesel working group, in which members are the specialists from each country. This review summarizes the introduction of biofuels in this region and the recent activities regarding the harmonization of the fuel quality standard. Important background for this review is based on the results of the ERIA biodiesel working group meeting.     

Non-linear dynamic simulation of gear response under the idling condition

A dynamic lumped-parameter gear model incorporating the effects of a time-varying and asymmetric mesh stiffness and a backlash nonlinearity is formulated to analyze the spur gear rattle response under the idling condition. The proposed theory assumes a rectangular time-varying mesh stiffness function. The phase shift between the mesh stiffness for forward and backward contacts is examined. Numerical studies are employed to examine the effects of engine torque fluctuations and tooth surface friction on the gear rattle response and the corresponding tooth impact behavior. Comparisons between the results from the time-invariant mesh stiffness model and the proposed time-varying mesh stiffness model reveal differences in the gear responses, especially when the mean rotational speed of the fluctuating gear pair is non-zero. The analysis reveals significant effects on the high frequency response components. However, the idling gear dynamics are relatively insensitive to tooth surface friction.     

PID plus fuzzy logic method for torque control in traction control system

A Traction Control System (TCS) is used to control the driving force of an engine to prevent excessive slip when a vehicle starts suddenly or accelerates. The torque control strategy determines the driving performance of the vehicle under various drive-slip conditions. This paper presents a new torque control method for various drive-slip conditions involving abrupt changes in the road friction. This method is based on a PID plus fuzzy logic controller for driving torque regulation, which consists of a PID controller and a fuzzy logic controller. The PID controller is the fundamental component that calculates the elementary torque for traction control. In addition, the fuzzy logic controller is the compensating component that compensates for the abrupt change in the road friction. The simulation results and the experimental vehicle tests have validated that the proposed controller is effective and robust. Compared with conventional PID controllers, the driving performance under the proposed controller is greatly improved.     

Hybrid vehicle power management modeling and refinement

The power management strategy in many hybrid vehicles is based on expert rules and thresholds. These rule-based strategies can result in good efficiency in term of fuel economy and emissions if their thresholds and rules are accurate. However, due to the complexity and the non-linearity of the hybrid powertrain, determining accurate thresholds and rules is neither explicit nor straightforward, and experts in most cases fail to define these thresholds and rules with enough accuracy. Based on this fact, the objective of this paper is to propose a method to improve this rule-based strategy by refining its thresholds and rules. To achieve this, we used an optimization method (dynamic programming) to calculate the optimal power management, determine the optimal control signals, and extract efficient thresholds and rules that can be used in real time. Finally, simulation results for the three strategies (optimal, simple and refined strategy) are shown and discussed.     

Adaptive neural network based fuzzy control for a smart idle stop and go vehicle control system

Idle stop and go (ISG) is a low cost but very effective technology to improve fuel efficiency and reduce engine emissions by preventing unnecessary engine idling. In this study, a new method is developed to improve the performance of conventional ISG by monitoring traffic conditions. To estimate frontal traffic conditions, an ultra-sonic ranging sensor is employed. Several fuzzy logic algorithms are developed to determine whether the engine idling is on or off. The algorithms are evaluated experimentally using various data gathered in real areas with traffic congestion. The evaluation results show that the method developed can reduce the chance of false application of ISG significantly while improving fuel efficiency up to 15%.     

Optimization of intake port design for SI engine

It is well known that in-cylinder flow is very important factor for the performance of SI engine. An appropriate in-cylinder flow pattern can enhance the turbulence intensity at spark time, therefore increasing the stability of combustion, reducing emission and improving fuel economy. In this paper, the effect of intake port design on in-cylinder flow is studied. It is found a vortex existed at the upper side of intake port of a production SI engine used in the study, during the intake stroke, which will reduce both tumble ratio and volumetric efficiency. A minor modification on intake port is made to eliminate the vortex and increase tumble ratio while keeping volumetric efficiency at the same level. It is demonstrated that the increase in tumble in the new design results in a 20 per cent increase in the fuel vaporization. In this study, both KIVA and STAR-CD are used to simulate the engine cold flow, as well as ICEM CFD and es-ice used as pre-processor respectively due to the complexity of engine geometry. Simulation results from KIVA and STAR-CD are compared and analyzed.     

Robust design optimization of suspension system by using target cascading method

This study presents the robust design optimization process of suspension system for improving vehicle dynamic performance (ride comfort, handling stability). The proposed design method is so called target cascading method where the design target of the system is cascaded from a vehicle level to a suspension system level. To formalize the proposed method in the view of design process, the design problem structure of suspension system is defined as a (hierarchical) multilevel design optimization, and the design problem for each level is solved using the robust design optimization technique based on a meta-model. Then, In order to verify the proposed design concept, it designed suspension system. For the vehicle level, 44 random variables with 3% of coefficient of variance (COV) were selected and the proposed design process solved the problem by using only 88 exact analyses that included 49 analyses for the initial meta-model and 39 analyses for SAO. For the suspension level, 54 random variables with 10% of COV were selected and the optimal designs solved the problem by using only 168 exact analyses for the front suspension system. Furthermore, 73 random variables with 10% of COV were selected and optimal designs solved the problem by using only 252 exact analyses for the rear suspension system. In order to compare the vehicle dynamic performance between the optimal design model and the initial design model, the ride comfort and the handling stability was analyzed and found to be improved by 16% and by 37%, respectively. This result proves that the suggested design method of suspension system is effective and systematic.     

Possible experimental method to determine the suspension parameters in a simplified model of a passenger car

Currently, as well as in the past, researchers have shown great interest in developing suspension systems for vehicles and especially in the design and optimization of the suspension parameters, such as the stiffness and the damping coefficient. These parameters are considered to be important factors that have an influence on safety and improve the comfort of the passengers in the vehicle. This paper describes a simplified methodology to determine, in a quick manner, the suspension parameters for different types of passenger cars equipped with passive suspension systems. Currently, different types of passenger cars are produced with different types of suspension systems. Finding a simplified methodology to determine these parameters with sufficient accuracy would contribute a simplified and quick method to the inspection of the working conditions of a suspension system. Therefore, a simple system to determine these parameters is needed. An analysis of the suspension parameters is performed using mathematical modeling and numerical analysis conducted using the Working Model software. The result derived from the developed methodology shows small errors when compared with the generic values, and it can be concluded that the design of the suspension parameter measurement device using the developed methodology is useful, simple, and has sufficient accuracy.     

SCR control strategy based on ANNs and Fuzzy PID in a heavy-duty diesel engine

The paper presents an innovative method combining artificial neural networks (ANNs) with Fuzzy PID to demonstrate the advantages of this control approach for meeting both NOx emission requirements and NH3 slip targets. An ANN model was utilized to simulate the formation of NOx emissions under various engine operating conditions. Next, an effective closed-loop control strategy with a type of feedback known as fuzzy PID is adopted for on-line, real-time control of 32.5% aqueous urea dosing in the exhaust stream. The new strategy explores the benefits by simulation and testing in the environments of Matlab/Simulink and ESC/ETC, respectively. The notable achievement of considerable NOx reduction and an acceptably small NH3 slip is obtained based on this new, feasible and effective strategy.