Non-Contact Suspension and Propulsion Technology

As a result of extensive research and development in several countries, the technologies of magnetic suspension and linear electric drives are becoming available for transportation applications. The successful demonstration and operation of prototype vehicles has established the technical viability of these systems. Several urban transit or shuttle services, with magnetic suspension and/or linear motor propulsion are likely to be operational within 3-4 years. After the final stages ofdevelopment and rigorous testing, high speed systems are likely to be an option for intercity implementation by the end of the decade. This paper presents a report on the worldwide status of R&D and test programs of non-contact suspension and propulsion technology for guided ground transport.     

The Lateral Dynamics of Motorcycles and Bicycles

The paper is a review of the state of knowledge and understanding of the steering behaviour of single-track vehicles, with the main accent on vehicle design, and vehicle design analysis and behaviour prediction.

The body of the paper consists of a chronological account of the steps which have been taken in establishing the current position. Scientific study of the motions of two-wheelers has been in progress for more than 100 years, but progress was slow and many conflicting conclusions were drawn until increasing understanding of tyre mechanics, systematic application of the laws of motion for systems of rigid bodies, digital computation and modern numerical methods, and improved mobile measurement, recording, and data processing capabilities allowed the pace to accelerate.

The current position, which is that a good understanding of the relationship between design and performance has been achieved, but that by no means have all the problems of significance been solved, is described at the end of the paper.     

The simulation of a fork-lift truck and crane transfer operation

The authors of this paper make use of computer simulation techniques as a means of investigating the problems associated with minimizing a ship's turn-round time.     

Modeling household interactions in daily in-home and out-of-home maintenance activity participation

The activity travel patterns of individuals in a household are inter-related, and the realistic modeling of activity-travel behavior requires that these interdependencies be explicitly accommodated. This paper examines household interactions impacting weekday in-home and out-of-home maintenance activity generation in active, nuclear family, households. The in-home maintenance activity generation is modeled by examining the duration invested by the male and female household heads in household chores using a seemingly unrelated regression modeling system. The out-of-home maintenance activity generation is modeled in terms of the decision of the household to undertake shopping, allocation of the task to one or both household heads, and the duration of shopping for the person(s) allocated the responsibility. A joint mixed-logit hazard-duration model structure is developed and applied to the modeling of out-of-home maintenance activity generation. The results indicate that traditional gender roles continue to exist and, in particular, non-working women are more likely to share a large burden of the household maintenance tasks. The model for out-of-home maintenance activity generation indicates that joint activity participation in the case of shopping is motivated by resource (automobiles) constraints. Finally, women who have a higher propensity to shop are also found to be inherently more efficient shoppers.     

A GIS‐based method to identify cost‐effective routes for rural deviated fixed route transit

Deviated fixed route transit (DFRT) service connecting rural and urban areas is a growing transportation mode in the USA. Little research has been done to develop frameworks for route design. A methodology to explore the most cost‐effective DFRT route is presented in this paper. The inputs include potential DFRT demand distribution and a road network. A heuristic is used to build possible routes by starting at urban cores and extending in all network directions in certain length increments. All the DFRT routes falling in the length range desired by the users are selected. The cost effectiveness of those routes, defined by operating cost per passenger trip, is compared. The most cost‐effective route is selected and presented in a GIS map. A case study illustrates the methodology in several Tennessee metropolitan regions. The most cost‐effective route length is case specific; some routes (e.g. those out of our Nashville case) are most cost effective when short, while others (e.g. those out of Memphis) are most cost effective when long. Government agencies could use the method to identify routes with the lowest operating cost per passenger given a route length or an operating cost budget. Copyright © 2016 John Wiley & Sons, Ltd.     

On the implementation of an auxiliary pantograph for speed increase on existing lines

The contact between pantograph and catenary at high speeds suffers from high dynamic contact force variation due to stiffness variations and wave propagation. To increase operational speed on an existing catenary system, especially for soft catenary systems, technical upgrading is usually necessary. Therefore, it is desirable to explore a more practical and cost-saving method to increase the operational speed. Based on a 3D pantograph–catenary finite element model, a parametric study on two-pantograph operation with short spacing distances at high speeds shows that, although the performance of the leading pantograph gets deteriorated, the trailing pantograph feels an improvement if pantographs are spaced at a proper distance. Then, two main positive effects, which can cause the improvement, are addressed. Based on a discussion on wear mechanisms, this paper suggests to use the leading pantograph as an auxiliary pantograph, which does not conduct any electric current, to minimise additional wear caused by the leading pantograph. To help implementation and achieve further improvement under this working condition, this paper investigates cases with optimised uplift force on the leading pantograph and with system parameter deviations. The results show that the two positive effects still remain even with some system parameter deviations. About 30% of speed increase should be possibly achieved still sustaining a good dynamic performance with help of the optimised uplift force.     

Practicability study on the suitability of artificial,neural networks for the approximation of unknown steering torques

For steer-by-wire systems, the steering feedback must be generated artificially due to the system characteristics. Classical control concepts require operating-point driven optimisations as well as increased calibration efforts in order to adequately simulate the steering torque in all driving states. Artificial neural networks (ANNs) are an innovative control concept; they are capable of learning arbitrary non-linear correlations without complex knowledge of physical dependencies. The present study investigates the suitability of neural networks for approximating unknown steering torques. To ensure robust processing of arbitrary data, network training with a sufficient volume of training data is required, that represents the relation between the input and target values in a wide range. The data were recorded in the course of various test drives. In this research, a variety of network topologies were trained, analysed and evaluated. Though the fundamental suitability of ANNs for the present control task was demonstrated.     

Development of an intelligent CAE system for auto-body concept design

The concept design phase is a critical step in auto-body design, as it has a great effect on later design work. This paper describes the implementation of an auto-body structure design in the early stages of a new auto-body developing program. In order to reduce the long design period and analysis error that plagues traditional auto-body concept design, an intelligent CAE system has been successfully developed and implemented based on the UGS NX/API opening platform. This system, the so-called ACD-ICAE (Auto-body concept design-intelligent computer aided engineering) System that means concept design-intelligent computer aided engineering system, employs a fully parametrized template method to build the conceptual auto-body geometry model and FEM model quickly and easily. It also integrates auto-body modeling, analysis and optimization on only one CAD platform via a parametric variables database. Moreover, all parametric variables are shared and updated in different phases of the ACD-ICAE System. A wizard User Interface (UI) based on knowledge of auto-body engineering was developed and used in this system. The procedures implementing the functional diagram of the ACD-ICAE system are also provided. A typical example of a car body concept design with four doors shows that the ACD-ICAE system is efficient and accurate.