Effect of Seismic Parameters on the Safety Factor for an Underground Cavern北大核心CSCD

In order to quantitatively evaluate the safety of the surrounding rock of an underground cavern under seis-mic load, a comprehensive evaluation method for the stability of surrounding rock is proposed based on the general safety factor and point safety factor. A calculation method for the general safety factor of a cavern based on the prin-ciple of shear strength reduction of a rock mass is given, the run-through of the plastic zone between the main power-house and main transformer room is presented as a critical criterion for the overall instability of the cavern, and the general safety factor is obtained by searching for the reduction coefficient. A point safety factor calculation method based on the Mohr-Coulomb yield criterion is given. The influence of different seismic input parameters on the general safety factor of the cavern and the point safety factor of key positions are studied based on an underground power-house cavern of a hydropower station in Southwest China. The results show that the quantitative evaluation method for the stability of the surrounding rock based on the safety factor is feasible and can reflect the general safety de-gree and local safety degree of different positions of the cavern for different working conditions. It is found that the general safety factor of the cavern and the point safety factor of key positions decrease with an increase of the ampli-tude and duration of a seismic wave while they increase with an increase of the incident angle; additionally, the low frequency of a seismic wave has a great influence on the cavern while the high frequency has little effect. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Innovative strategies for urban car-sharing systems and a simulator to assess their performance

In this paper, three innovative car-sharing systems for urban areas are proposed, based on fleets of individual intelligent vehicles with three service characteristics: instant access, open-ended reservations and one-way trips. These features provide high flexibility but create an uneven distribution of vehicles among stations. Therefore, relocation of vehicles must be performed. Three different system procedures are proposed: in the first system, relocations are performed by users; in the other two, vehicles relocate automatically, thanks to their automation. In the first two systems, vehicles are accessible only at stations, whereas in the third they are also accessible along roads. In order to provide transport managers with a tool to test systems in different realities, an object-oriented simulator is developed. The simulation provides outputs of system performance, in terms of user waiting times and system efficiency. The proposed systems are simulated for the city of Genoa, in Italy, and a comparative analysis is presented.     

Measuring quality of service in dial-a-ride operations: the case of a Canadian city

In many countries, dial-a-ride services are provided by public authorities to elderly and handicapped people who cannot use regular transit. Cost minimization is key to running these services, but one can observe a growing interest in quality measurement and improvement. A first step in improving quality is to define a quality measurement scale specific to dial-a-ride services. A second step is to incorporate quality measurements in mathematical models that serve as a basis for optimization algorithms. To this end, an extensive survey of dial-a-ride users was conducted in Longueuil, the largest suburb of Montreal, Canada. This paper describes the steps of the survey and presents its main conclusions: (1) 56 attributes were identified based on interviews, (2) the questionnaire developed has proved to be reliable and valid, (3) an exploratory factor analysis allowed us to determine 13 dimensions of quality in dial-a-ride services, (4) the most important criteria for users were identified, and (5) population segmenting variables by which subgroups of users can be categorized were also determined. Managerial implications of our results are also discussed.     

The determinants of long distance travel in Great Britain

This study analyses of the determinants of long distance travel in Great Britain using data from the 1995-2006 National Travel Surveys (NTSs). The main objective is to determine the effects of socio-economic, demographic and geographic factors on long distance travel. The estimated models express the distance travelled for long distance journeys as a function of income, gender, age, employment status, household characteristics, area of residence, size of municipality, type of residence and length of time living in the area. A time trend is also included to capture common changes in long distance travel over time not included in the explanatory variables. Separate models are estimated for total travel, travel by each of four modes (car, rail, coach and air), travel by five purposes (business, commuting, leisure, holiday and visiting friends and relatives (VFRs)) and two journey lengths (<150 miles and 150+ miles one way), as well as the 35 mode-purpose-distance combinations.The results show that long distance travel is strongly related to income: air is most income-elastic, followed by rail, car and finally coach. This is the case for most journey purposes and distance bands. Notable is the substantial difference in income elasticities for rail for business/commuting as opposed to holiday/leisure/VFR. In addition, the income elasticity for coach travel is very low, and zero for the majority of purpose-distance bands, suggesting coach travel to be an inferior mode in comparison to car, rail and air. Regarding journey distance, we find that longer distance journeys are more income elastic than shorter journeys.For total long distance travel, the study indicates that women travel less than men, the elderly less than younger people, the employed and students more than others, those in one adult households more than those in larger households and those in households with children less than those without. Long distance travel is also lowest for individuals living in London and greatest for those in the South West, and increases as the size of the municipality declines.     

Estimating the robustness of questionnaire results: lessons from a mixed-mode survey of expectations for tele-working and road-based business travel

The robustness of questionnaire results to various forms of bias are explored in the context of a dual-mode (web and hardcopy) survey of employers’ anticipations of levels of employee commuting and business travel activity under a range of future ICT scenarios. The questionnaire incorporated several innovative features which, together with the dual-mode format, allowed an unusually wide range of analyses. For example: the robustness of respondents’ opinions was tested by examining the effect of incorporating alternative versions of a briefing text, one being very positive and one very negative, about the role of ICT; instrument bias was identified via detailed comparison of the results from the two versions of the questionnaire; and the impact of exogenous factors which are often ignored or taken as constant was assessed via special supplementary questions. Analysis showed that the robustness of opinions and expectations varied and was influenced by respondent characteristics, and that results from the two versions of the questionnaire differed significantly. It is concluded that opinions and expectations are less robust, and questionnaire results are more subject to bias and myopic interpretation, than is generally recognised and that web-based surveys seem particularly vulnerable to sampling bias. Methods are suggested for measuring robustness, for reducing bias and for validating and contextualising results. The use of contrasting briefing texts is recommended as a means of establishing the robustness of opinions and expectations while supplementary questions are recommended for validating and contextualising SP and SE exercises.

Second best toll and capacity optimisation in networks: solution algorithm and policy implications

This paper looks at the first and second best jointly optimal toll and road capacity investment problems from both policy and technical oriented perspectives. On the technical side, the paper investigates the applicability of the constraint cutting algorithm for solving the second best problem under elastic demand which is formulated as a bilevel programming problem. The approach is shown to perform well despite several problems encountered by our previous work in Shepherd and Sumalee (Netw. Spat. Econ., 4(2): 161–179, 2004). The paper then applies the algorithm to a small sized network to investigate the policy implications of the first and second best cases. This policy analysis demonstrates that the joint first best structure is to invest in the most direct routes while reducing capacities elsewhere. Whilst unrealistic this acts as a useful benchmark. The results also show that certain second best policies can achieve a high proportion of the first best benefits while in general generating a revenue surplus. We also show that unless costs of capacity are known to be low then second best tolls will be affected and so should be analysed in conjunction with investments in the network.

Identifying optimal data aggregation interval sizes for link and corridor travel time estimation and forecasting

With the recent increase in the deployment of ITS technologies in urban areas throughout the world, traffic management centers have the ability to obtain and archive large amounts of data on the traffic system. These data can be used to estimate current conditions and predict future conditions on the roadway network. A general solution methodology for identifying the optimal aggregation interval sizes for four scenarios is proposed in this article: (1) link travel time estimation, (2) corridor/route travel time estimation, (3) link travel time forecasting, and (4) corridor/route travel time forecasting. The methodology explicitly considers traffic dynamics and frequency of observations. A formulation based on mean square error (MSE) is developed for each of the scenarios and interpreted from a traffic flow perspective. The methodology for estimating the optimal aggregation size is based on (1) the tradeoff between the estimated mean square error of prediction and the variance of the predictor, (2) the differences between estimation and forecasting, and (3) the direct consideration of the correlation between link travel time for corridor/route estimation and forecasting. The proposed methods are demonstrated using travel time data from Houston, Texas, that were collected as part of the automatic vehicle identification (AVI) system of the Houston Transtar system. It was found that the optimal aggregation size is a function of the application and traffic condition.

Regulation of the informal transport sector in Rio de Janeiro,Brazil: welfare impacts and policy analysis

In Brazil, the explosion of informal transport activity during the past decade has had profound effects on formal public transport systems and is a source of great controversy in the urban transportation sector. A variety of policies have been proposed to manage the growth of the sector. This study seeks to understand how proposed policies will impact the users of these systems. A corridor in Rio de Janeiro with substantial informal activity was used as a case study. Measures of welfare changes in a discrete choice framework were used to estimate proposed policies’ impacts on users. Eleven candidate policies were evaluated, ranging from the eradication of the informal modes and investment in formal modes, to the legalization of the informal modes. Benefits were compared with costs and the distribution of benefits across income classes was explored. Net benefits from some policies were found to be substantial. Legalizing the informal sector was found to benefit users slightly but further investments in the sector are probably inefficient. Users benefited most from improvements in formal mass transit modes, at roughly 100–200 dollars per commuter per year. Finally, policies to foster a competitive environment for the delivery of both informal and formal services were shown to benefit users about 100 dollars per commuter per year. Together, the regulation of the informal sector and investments in the formal sector serve to reinforce the movement towards competitive concessions for services and help reduce the impacts of cartelization and costly in-road competition.

Tool for Predicting the Ultimate Bending Moment of Ship and Ship-Shaped Hull Girders

The present paper presents a historical review associated with the research works on hull girder strength of ship and ship-shaped structures. Then, a new program is developed to determine the ultimate vertical bending moment of hull girder by applying direct method, stress distribution method, and progressive collapse analysis method. Six ships and ship-shaped structures used in the benchmark study of International Ship and Offshore Structures Congress (ISSC) in 2012 are adopted as examples. The calculation results by applying the developed program are analyzed and compared with the existing results. Finally, the roles of the developed program and its further development are discussed.