Fuel consumption of fuel cell hybrid vehicles considering battery SOC differences

Fuel cell hybrid vehicles (FCHVs) have become one of the most promising candidates for future transportation due to current energy supply problem and environmental problem. Fuel economy is an important factor in FCHVs. In order to properly evaluate the fuel economy of an FCHV, the initial battery state of charge (SOC) and the final battery SOC have to be identical so that the effect of the battery energy usage on the fuel economy is neglected. In the simulation or in the real driving, however, the final battery SOC is usually different from the initial battery SOC, and the final battery SOC often depends on the power management strategy. To consider the difference between the two battery SOC values, the concept of equivalent fuel consumption is presented by two methods. One is based on the relationship between delta SOC and delta fuel consumption, and the other is based on the optimal control theory. Two rule-based power management strategies for an FCHV are presented, and for each strategy, the fuel economy is evaluated based on the two methods. The characteristics of the two methods are discussed and compared, and the superior one is selected based on the comparison.     

Simulation of city bus performance based on actual urban driving cycle in China

This paper establishes the simulation model of a city bus on the basis of the EQ6110 bus prototype and its experimental data. According to the actual urban driving cycle, the fuel economy and the traction performance of the EQ6110 city bus have been simulated, and factors such as the driving cycle, the loss of power to engine accessories, the gear-shifting strategy, the fuel shut-off strategy of the engine, etc., which influence on the bus’s fuel economy, are also quantitatively analyzed. Some conclusions are drawn as follows: (1) driving cycles have a great influence on the fuel economy of a city bus; (2) under the typical urban driving cycle of the public bus in China, the engine fuel shut-off strategy can save about 1 to 1.5 percent of the fuel consumption; and (3) the optimized gear-shifting rules can save 6.7 percent of the fuel consumption. Experimental results verify that the fuel economy for the EQ6110 public bus is improved by 7.2 pecent over the actual Wuhan urban driving cycle of the current public bus in China.     

Prediction of fatigue life and estimation of its reliability on the parts of an air suspension system

Air suspension systems have been implemented in various commercial vehicles, such as buses and special purpose trucks, because of the comfortable ride and easy height control. An evaluation of the durability of vehicle parts has been required for service life and safety starting in the early stages of design. The cyclic load applied to the vehicle can cause fatigue failure of parts, such as the suspension frame. This paper presents a method to predict the fatigue life of the suspension frame at the design stage of the air suspension system used in a heavy-duty vehicle. To estimate the fatigue life using the SN method, the Dynamic Stress Time History (DSTH) is necessary for the part of interest. DSTH can be obtained from the results of the flexible body dynamic analysis using the Belgian road simulation and the Modal Stress Recovery (MSR) method. Furthermore, the reliability of the predicted fatigue life can be evaluated by considering the variations in material properties. The probability and distribution of the expected life cycle can be obtained using experimental design with a minimum number of simulations. The advantage of using statistical methods to evaluate the life cycle is the ability to predict replacement time and the probability of failure of mass-produced parts. This paper proposes a rapid and simple method that can be effectively applied to the design of vehicle parts.     

Benthic sediment composition and nutrient cycling in an Intermittently Closed and Open Lake Lagoon

Surfical sediments within Corunna Lake, a moderate size Intermittently Closed and Open Lake Lagoon (ICOLL), were examined for solid phase nutrient concentrations (TN, TP, TOC,) and solute exchange rates between the sediment and water column (O₂, NO₃–N, NH₄–N, FRP, and N₂). The surfical sediments in Corunna Lake contained high concentrations of TN (5 mg/g dry mass), total phosphorus (0.6 mg/g dry mass), and TOC (~ 5% dry mass). The carbon stable isotope ratio (δ¹³C) and TOC:TN ratios (δ¹³C ~ ? 24, TOC:TN ~ 11–14) demonstrated that the composition of the organic matter in the sediment was a mixture derived primarily of degraded planktonic matter. The close association between TP and Fe concentrations highlighted the potential role Fe plays in mediating Filterable Reactive Phosphorus (FRP) concentrations in the water column of Corunna Lake. In situ benthic chamber incubations were used to measure benthic fluxes. Solute exchange rates between the sediment and water column in Corunna Lake were similar to other reported studies (O₂ = ? 469 to ? 1765 µmol m^? 2 h^? 1, NH₄–N = 0.1–63 µmol m^? 2 h^? 1, NO₂/NO₃–N = 0 µmol m^? 2 h^? 1, FRP = ? 4–1.6 µmol m^? 2 h^? 1and N₂ = 12–356 µmol m^? 2 h^? 1). As more carbon was deposited and mineralized the efficiency of the bacterial population to denitrify nitrogen in the sediment decreases. The linkage between land use and benthic biogeochemistry was also explored. A dairy farm exists in the middle catchment of Corunna Lake, and the receiving bay sediment consistently demonstrated the highest oxygen consumption rates in winter and spring (? 1408 µmol m^? 2 h^? 1 in winter, ? 1691 µmol m^? 2 h^? 1 in spring) and lowest denitrification efficiencies during summer (~ 3%). Nitrate/nitrite fluxes were not observed during any of the chamber incubations, with the concentrations of nitrate/nitrite being below detection limits (< 10 μg/L). Seasonal changes influenced the rates of solute exchange between the sediment and water column. Critical measures of solute exchange for NH₄–N and biogenic N₂ indicated that seasonal temperature changes play a significant role in mediating the reaction rates of sedimentary based biogeochemical processes. Measurable FRP fluxes were small but greater in the benthic sediments which received higher carbon inputs. Sediments have a high capacity to adsorb P which is released as sediment oxygen demand increases as a result of increases in labile carbon loads.     

Adapting the light · biomass (BZI) models of phytoplankton primary production to shallow marine ecosystems

Several authors have reported a strong linear relationship between daily phytoplankton production and the product of chlorophyll biomass, photic depth, and incident irradiance for a variety of estuaries. This “light · biomass” (BZ_pI_o) formulation has been proposed as an alternative to traditional mechanistic approaches for computing phytoplankton production in numerical estuarine models. One limitation to their application in shallow systems is that the BZ_pI_o models have been developed in relatively deep estuaries where light does not reach the bottom. We propose a nonlinear correction factor to adapt the BZ_pI_o relationship to shallow systems where light does reach the bottom. Our function takes into account variations in incident irradiance, attenuation coefficient for light, photosynthetic efficiency, and maximum rate of photosynthesis. A series of correction polynomials are proposed for various ranges of incident irradiance, and are integrated into a single multiple polynomial which applies across all irradiance levels. Our new correction factor was tested against a ¹⁴C-based productivity dataset from shallow stations in Narragansett Bay, RI and an O₂-based dataset from shallow (1.1 m) lagoon mesocosms at the University of Rhode Island. Results showed that our polynomials accurately correct BZ_pI_o-predicted rates of production in shallow water columns. Application of our correction factor to a series of shallow water productivity datasets from the literature together with theoretical calculations show how significant the shallow water correction can be, especially in very shallow water columns with low turbidity.     

Choice of parking: Stated preference approach

Over recent years, parking policy has become a key element of transport policy in many countries. Parking policy measures can affect many different dimensions of travel behaviour but are likely to be most significant in terms of travellers' choice of parking type and location. This dimension of travel choice has, to date, received comparatively little attention, yet is of vital importance if we are to properly understand and predict the effects of parking policy measures.This paper presents two studies addressing this issue carried out in the United Kingdom and Germany. Both studies used a stated preference approach in order to collect disaggregate data on travellers responses to changes in parking attributes and used these data to build simple logit models of parking type choice. The studies were designed in order to allow comparable choice models to be estimated from the two datasets. The results obtained strongly indicate the need to separately identify the costs associated with different components of the parking activity (e.g., general in-vehicle time, parking search time, egress time) and also point to the existence of significant differences in the relative valuation of these components across different journey purposes. Where possible, the results of the choice modelling exercises are also compared with existing revealed and stated preference results and are found to be generally in line with prior expectations.     

Primary productivity and export fluxes on the Canadian shelf of the Beaufort Sea: A modelling study

We present a coupled sea ice–ocean-biological (including ice algae) model in the Arctic Ocean. The 1D model was developed and implemented on the Canadian Beaufort Sea shelf to examine the importance of different physical processes in controlling the timing and magnitude of primary production and biogenic particle export over an annual cycle (1987). Our results show that the snow and sea ice cover melt and/or break-up controls the timing of the phytoplankton bloom but primary producers (ice algae and phytoplankton) on the outer shelf are essentially nutrient limited. The total annual primary production (22.7 to 27.7 g-C m^? 2) is thus controlled by nutrient “pre-conditioning” in the previous fall and winter and by the depth of wind mixing that is controlled in part by the supply of fresh water at the end of spring (ice melt or runoff). The spring bloom represents about 40% of the total annual primary production and occurs in a period of the year when sampling is often lacking. Time interpolation of observed values to obtain total annual primary production, as done in many studies, was shown to lead to an underestimation of the actual production. Our simulated ratios of export to primary production vary between 0.42 and 0.44.