Design and evaluation of an integrated inventory and transportation system

This paper proposes the adoption of an integrated inventory and transportation system (IITS) to minimize the total costs of inventory and transportation. A non-linear programing is developed by analyzing transportation and inventory costs with one supplier and many retailers in the distribution environment. The paper compares the proposed model with the traditional approach in computing total costs with numerical data. The results indicate that the total costs can be optimized by adopting integrated programing rather than the traditional approach, along with achieving improved customer service levels. In particular, sensitivity analysis is applied to determine the performance of the IITS under various transportation costs, holding costs and shortage costs. It shows that the transportation cost per unit is most sensitive in the proposed model. In this situation, the IITS is more effective for cost saving when set-up cost, holding and shortage costs are high, but is less effective for situations involving high per-unit transportation costs.     

Optimization of transport investment and pricing policies: the role of transport pricing in network design

This paper investigates the role of transport pricing in network design and describes two facts about flow pattern in a transportation system. The first, illustrated by an example of Braess paradox, is that adding a new link to the network does not necessarily minimize the total travel time. The second is that introducing of appropriate toll pricing may reduce not only the total network time but also the travel time for each individual traveller. It follows with the investigations of different system objectives and different pricing policies (only toll pricing and distance‐based pricing are considered), and shows how they affect the system performance and flow pattern. Lastly, a systematic optimization process is proposed for integrated planning of transport network and pricing policies.     

Modeling the interactions between car and bicycle in heterogeneous traffic

In this paper, a new cellular automata model is proposed to simulate the car and bicycle heterogeneous traffic on urban road. To capture the complex interactions between these two types of vehicles, a novel occupancy rule is adopted in the proposed model to consider the variable lateral distances of mixed vehicular traffic. Based on massive simulations, microscopic fundamental diagrams under different bicycle densities are devised. With these, the bicycle's spilling behavior is then investigated and discussed. In order to reflect the interference of a bicycle on a car, the interference transformation from friction state to block state is modeled explicitly. Finally, different simulation results under different occupancy rules indicate that the constant and fixed occupancy rule adopted in the previous studies might lead to overestimation of car flux in the heterogeneous traffic flows with different bicycle densities. Copyright © 2013 John Wiley & Sons, Ltd.     

The effect of the oil crisis on the growth in the ownership and use of cars

Since the oil crisis of 1973, a number of studies have been made in various countries of the effects of the rise in petrol prices on the level of traffic flow, but rather fewer have attempted to delineate the complex chain of reactions within the car market set off by this impulse. We attempt to do this, using data from the UK.Since 1966 during the prediction stage of the first London Transportation Study it became obvious that low income and high income households had different rates of growth of car ownership, mainly because low income households bought cheap, old cars which vary in quantity and price differently from expensive, new cars. The Greater London Council therefore sponsored a study of car prices by age and size, starting from 1957 annually, and since the oil crisis, evaluated monthly. This has enabled us to examine the strong change in trend that had occurred, with large cars depreciating 15% per annum more than the smallest. The quantities of cars of each size registered each month are available from national statistics and this enables us to say that the previous 1% per annum increase in car size was arrested, with new cars becoming substantially smaller.A model of the car market has been developed which relates on the one hand the price distribution of cars by age, and on the other hand the price. distribution of the stock of cars owned at each household income level. Via the expenditure on car purchase at each household income level and the distribution of the length of time between purchase and resale of cars, a fully dynamic model has been developed to relate expenditure flow and stock. This enables us to test the effect of different trends on the dynamic equilibrium in the car market.The implications of the two trends noted above on the prediction of future car ownership growth are discussed, with the standstill since the oil crisis attributed to petrol prices via the split in household expenditure between purchase and use.     

Cooperation in transit delivery in West German metropolitan areas

West Germany is densely populated, averaging 245 inhabitants/km², but varying widely between urban agglomerations and rural areas. Transport volume has increased by 40% since 1970, with virtually all growth due to private automobiles. Since 1981 public transit has been suffering from decreasing demand.A 1964 Expert's Report to the German federal government was the stimulus for initiating an effective funding mechanism for new public transit construction. In 1965 Germany's first federated transit authority was founded for the region of Hamburg.Principal among the goals of any cooperative agreement among transit companies are improvements for the passengers and improvement of revenues for the companies. To attain these ends, two distinct forms of transit aggrements have been developed in Germany: transit cooperative (Verkehrsgemeinschaft) and transit federation (Verkehrsverbund). The former is more suitable for smaller to medium-sized towns, while the latter is more suitable for larger cities. The two types are described in this article.German transit federations during the 1970s succeeded in significantly increasing ridership, while during the 1980s patronage has either remained steady or has declined. Yet transit federations showed much better perfomance than did public transit in general. In terms of costs and revenues, no public transit organization in Germany is able to break even; deficits vary between 42% and 55%. The author concludes, however, that hidden subsidies for automobile traffic are far higher, because of environmental damage and the high social cost of traffic accidents.     

Prediction of the dimensional deformation of the addendum and dedendum after the warm shrink fitting process using a correction coefficient

The warm shrink fitting process is generally used to assemble automobile transmission parts (shafts/gears). However, this process causes a deformation in the addendum and dedendum of the gear depending on the fitting interference and gear profile, and this deformation causes additional noise and vibration between the gears. To address these problems, the warm shrink fitting process is analyzed by considering the error in the dimensional deformation of the addendum and dedendum found when comparing the results of a theoretical analysis and finite element analysis (FEA). A correction coefficient that reduces this error is derived through an analysis of the difference in the cross-sectional area between the shapes used for the theoretical analysis and that of the actual gear, and a closed-form equation to predict the dimensional deformation of the addendum and dedendum is proposed. The FEA method is proposed to analyze the thermal-structural-thermal coupled field analysis of the warm shrink fitting process (heating-fitting-cooling process). To verify the closed-form equation using the correction coefficient, measurements are made of actual helical gears used in automobile transmissions. The results are in good agreement with those given by the closed-form equation.     

Major sources of hydrocarbon emissions in a premixed charge compression ignition engine

Although premixed charge compression ignition (PCCI) combustion engines are praised for potentially high efficiency and clean exhaust, experimental engines built to date emit more hydrocarbons (HCs) and carbon monoxide (CO) than the conventional machines. These compounds are not only strictly controlled components of the exhaust gas of road vehicles but are also an energy loss indicator. The prime objective of this study was to investigate the major sources of the HCs formed in the combustion chamber of an experimental PCCI engine in order to suggest some effective technologies for HC reduction. In this study, to explore the dominant sources of HC emissions in both operation modes, a single cylinder engine was prepared such that it could operate using either conventional diesel combustion or PCCI combustion. Specifically, the contributions of the top-ring crevice volume in the combustion chamber and the bulk quenching of the lean mixture were investigated. To understand the influence of the shape and magnitude of the crevice on HC emissions, the engine was operated with 12 specially prepared pistons with different top-ring crevices installed one after another. The engine emitted proportionally more HCs as the depth of the crevice increased as long as the width remained narrower than the prevailing quench distance. The top-ring-crevice-originated exhaust HCs comprised approximately 31% of the total HC emissions in the baseline condition. In a series of tests to estimate the effects of bulk quench on exhaust HC emissions, intake air was heated from 300K to 400K in steps of 25K. With the intake air heated, HC and CO emissions decreased with a gradually diminishing rate to zero at 375K. In conclusion, the most dominant sources of HC emissions in PCCI engines were the crevice volumes in the combustion chamber and the bulk quenching of the lean mixtures. The key methods for reducing HC emissions in PCCI engines are minimizing crevice volume in the combustion chamber and maximizing intake air temperature allowed based on the permissible NOx level.     

Topology optimization of gas flow channel routes in an automotive fuel cell

An efficient topology optimization method for fluid-structure problems was developed in an effort to determine the optimum flow channel route in a fuel cell bipolar plate from first principles. This study describes the derivation and solution of new mathematical equations for topology optimization combining a density-based algorithm, the interpolation method of moving asymptotes (MMA), and the incompressible Navier-Stokes equation with a term representing the chemical reaction between hydrogen and the catalyst. The present method is based on the finite element method with a newly developed reaction rate equation. In this model, a topology variable of 0 represents viscous flow, whereas a value of 1 indicates porous flow. The flow velocity and pressure were obtained from the Navier-Stokes equation and constraints and element matrices for sensitivity analyses during the optimization. MMA was utilized to calculate the optimum flow routes in the design domain. The influence of the key design parameter q and the pressure drop on the optimum topology were also investigated. The channel topology became smoother with decreasing q, and the number of channels increased with increasing pressure drop.     

Aerodynamic design optimization of rear body shapes of a sedan for drag reduction

This study proposes an aerodynamically optimized outer shape of a sedan by using an Artificial Neural Network (ANN), which focused on modifying the rear body shapes of the sedan. To determine the optimization variables, the unsteady flow field around the sedan driving at very fast speeds was analyzed by CFD simulation, and fluctuations of the drag coefficient (C _D ) and pressure around the car were calculated. After consideration of the baseline result of CFD, 6 local parts from the end of the sedan were chosen as the design variables for optimization. Moreover, an ANN approximation model was established with 64 experimental points generated by the D-optimal methodology. As a result, an aerodynamically optimized shape for the rear end of the sedan in which the aerodynamic performance is improved by about 5.64% when compared to the baseline vehicle is proposed. Finally, it is expected that within the accepted range of shape modifications for a rear body, the aerodynamic performance of a sedan can be enhanced so that the fuel efficiency of the sedan can be improved. The YF SONATA, a sedan manufactured by Hyundai Motors Corporate, played a major role in this research as the baseline vehicle.     

Study of an optimized gas strut layout to improve opening and closing quality

The most important factor in gas strut design is determining an optimized layout. If the layout is not optimized, vehicle operators will have a suboptimal experience when opening and closing the tailgate. A poor layout of the gas struts causes operators to work excessively when they open/close the tailgate, and vehicle owners will incur additional expenses due to deterioration in the body quality of the vehicle. Thus, an optimized gas strut layout is very important, even if it does not seem interesting. This paper describes the tailgate operation process and focuses on determining an optimized gas strut layout for opening/closing the tailgate easily.