Experiments with an activity-based travel model

Transportation - Experiments are described with an activity-based travel model, estimated on a 7-day activity-diary survey. The first part of the paper describes the model system in its final form,...     

Enhancing roll stability of heavy vehicle by LQR active anti-roll bar control using electronic servo-valve hydraulic actuators

Rollover of heavy vehicle is an important road safety problem world-wide. Although rollovers are relatively rare events, they are usually deadly accidents when they occur. The roll stability loss is the main cause of rollover accidents in which heavy vehicles are involved. In order to improve the roll stability, most of modern heavy vehicles are equipped with passive anti-roll bars to reduce roll motion during cornering or riding on uneven roads. However these may be not sufficient to overcome critical situations. This paper introduces the active anti-roll bars made of four electronic servo-valve hydraulic actuators, which are modelled and integrated in a yaw-roll model of a single unit heavy vehicle. The control signal is the current entering the electronic servo-valve and the output is the force generated by the hydraulic actuator. The active control design is achieved solving a linear optimal control problem based on the linear quadratic regulator (LQR) approach. A comparison of several LQR controllers is provided to allow for tackling the considered multi-objective problems. Simulation results in frequency and time domains show that the use of two active anti-roll bars (front and rear axles) drastically improves the roll stability of the single unit heavy vehicle compared with the passive anti-roll bar.     

Modelling the effects of physical–biological interactions and spatial variability in spawning and nursery areas on transport and retention of sardine Sardinops sagax eggs and larvae in the southern Benguela ecosystem

A particle-tracking individual-based model (IBM) coupled with a 3-D hydrodynamic model was used to investigate how spatial variability in spawning and nursery grounds may influence transport and retention of sardine (Sardinops sagax) eggs and larvae in the southern Benguela ecosystem. A temperature-dependent Bělehrádek development model based on laboratory growth data was used to determine the duration of one egg and two larval stages. Successful transport/retention depended on each particle's stage of development rather than its age. Results show that recruitment could occur in two distinct nursery areas on the west and south coasts of South Africa. Three viable recruitment ‘systems’ were identified: two are retention-based (spawned and retained on the west coast (WC–WC) or the south coast (SC–SC)) and one is transport-based (spawned on the south coast and transported to the west coast (SC–WC)). In the WC–WC system, the vertical distribution of eggs influenced retention; at intermediate depths of spawning (25–50 m) eggs avoided both offshore Ekman drift and deep cold water. In the SC–SC system, the area of spawning was important; > 50% of eggs from the eastern Agulhas Bank (EAB) were retained in the south coast nursery grounds, whereas very few eggs were transported there from west of Cape Agulhas. In the SC–WC system, area of spawning was also important; 40% of the eggs spawned on the western Agulhas Bank (WAB) were transported to the west coast nursery ground. Sardine life history strategy could be divided between two main systems: the west coast system (spawning on the WAB and WC, and recruiting to the WC) and the Agulhas Bank system (spawning on the central and eastern Agulhas Bank, and recruiting to the SC).     

How much noise reduction at airports?

Airport noise nuisance is a negative externality especially when it occurring near urban areas. Like all externalities, noise nuisance may be a reason for government intervention. When intervening, governments should set quantitative policy targets with care. In practice, this issue is generally neglected. This line of research sets the first step towards determining optimal policy targets in the case of noise nuisance near airports, more specifically in the case of Amsterdam Airport. We use hedonic pricing to establish the benefits of noise reduction. Furthermore, we develop a bottom-up cost function to analyze the costs of reducing noise for airlines. We then equate marginal costs and benefits to establish the optimal level of noise reduction, which appears to be 3 dB in the case of Amsterdam Airport. Welfare increasing measures include alternative approach procedures, regional substitution of planes within existing fleets and early depreciation of noisy planes increase welfare. Reducing the number of flights has a negative effect on net welfare.     

A new instrument for sediment temperature measurements

A novel self-contained probe is presented which measures the sediment temperature of tidal flats between the surface and 40-cm depth, and indicates whether the flats are flooded or dry. Depending on the selected acquisition interval, the endurance of the probe is more than 6 months. It can be applied for the investigation of thermodynamic properties of the tidal flats impacting physical and biological processes. Intensive tests have shown that the probe is robust and reliable and can be easily operated by a single person. In case of rough weather conditions, the usage of scour protectors is recommended.     

Introducing advanced electronic driver support systems: An exploration of market and technological uncertainties

R&D in the field of driver support systems is increasingly paid attention to. These systems can contribute significantly to public traffic goals. However, there is much uncertainty about future technology developments, market introduction, and impacts on driver and traffic behaviour. An international Delphi study collecting expert opinions on these issues is partly described here. The Delphi study was organized in three rounds. Opinions of 50 experts from the USA, Japan and Europe were collected. The paper is limited to market introduction, and technological and driver-behavioural barriers. The main conclusion is that future developments are less obvious than often assumed.     

The Role of Indigenous Resurgence in Marine Conservation

Abstract

Indigenous peoples’ efforts toward environmental conservation are indivisible from their cultural identity and their social and political organizations. Indigenous resurgence, including the reinvigoration and reestablishment of Indigenous ways of living, are linked to the management, restoration, and conservation of marine and coastal ecosystems around the world. However, there remains a significant gap in the recognition and support of Indigenous governance systems in international policy discussions regarding conservation work. As a way to address this gap, we offer an analysis of marine Indigenous community-led conservation initiatives from around the world that were recipients of the UNDP Equator Prize, framed by initial research on Indigenous-led conservation in British Columbia, Canada. We highlight specific Indigenous governance strategies undertaken by such communities that foster both marine resource conservation and stewardship. The strategies we identified included practicing Indigenous traditional resource management, protection of traditional territories, Indigenous-led actions of environmental conservation, and data collection and monitoring. We also identified networking and collaboration with non-Indigenous supporters, as was reinvestment into education and capacity-building within the community. We conclude with concrete policy suggestions drawn from these cases that can help strengthen the leadership and self-determination of Indigenous peoples on local resource and environmental issues, and aid in much broader conservation efforts globally.     

Towards an ‘inland terminal centred’ value proposition

The two main value propositions in international container transport are ‘port-to-port’ services and ‘door-to-door’ services. In port-to-port services, buyers ‘just’ purchase maritime transport from a shipping line. Door-to-door services comprise the total transport chain and include land-based transport. Carriers as well as forwarders offer these door-to-door services. In this paper we provide a qualitative assessment of an emerging third value proposition that is centred around inland terminals (ILTs). Such a value proposition consists of transport up to the ILT, and may have advantages over port-to-port services, such as better leverage of scale economies, better repositioning of empty containers and better alignment with the business model of forwarders. This paper conceptually and empirically explores such a value proposition.     

Optimization of bow shape for a non ballast water ship

In this research,a commercial CFD code ＂Fluent＂ was applied to optimization of bulbous bow shape for a non ballast water ships（NBS）.The ship was developed at the Laboratory of the authors in Osaka Prefecture University,Japan.At first,accuracy of the CFD code was validated by comparing the CFD results with experimental results at towing tank of Osaka Prefecture University.In the optimizing process,the resistances acting on ships in calm water and in regular head waves were defined as the object function.Following features of bulbous bow shapes were considered as design parameters： volume of bulbous bow,height of its volume center,angle of bow bottom,and length of bulbous bow.When referring to the computed results given by the CFD like resistance,pressure and wave pattern made by ships in calm water and in waves,an optimal bow shape for ships was discovered by comparing the results in the series of bow shapes.In the computation on waves,the ship is in fully captured condition because shorter waves,λ/Lpp 0.6,are assumed.     

Modelling Externalities using Dynamic Traffic Assignment Models: A Review

Recently, there has been a growing interest in externalities in our society, mainly in the context of climate and air quality, which are of importance when policy decisions are made. For the assessment of externalities in transport, often the output of static traffic assignment models is used in combination with so-called effect models. Due to the rapidly increasing possibilities of using dynamic traffic assignment (DTA) models for large-scale transportation networks and the application of traffic measures, already several models have been developed to assess the externalities using DTA models more precisely. Different research projects have shown that there is a proven relation between the traffic dynamics and externalities, such as emissions of pollutants and traffic safety. This means that the assessment of external effects can be improved by using temporal information about flow, speed and density, which is the output of DTA models. In this paper, the modelling of traffic safety, emissions and noise in conjunction with DTA models is reviewed based on an extensive literature survey. This review shows that there are still gaps in knowledge in assessing traffic safety, much research is available concerning emissions, and although little research has been conducted concerning the assessment of noise using DTA models, the methods available can be used to assess the effects. Most research so far has focused on the use of microscopic models, while mesoscopic or macroscopic models may have a high potential for improving the assessment of these effects for larger networks.