Numerical simulation on truncated oval-nosed projectile penetrating into stiffened plate北大核心CSCD

[Objectives]In this paper, the numerical simulation method is used to study the anti-penetration performance and energy absorption mode of a stiffened plate, as well as the influence of different stiffened bars on the flight attitude of the projectile body.[Methods] Finite element software LS-DYNA is used to simulate the process of a truncated oval-nosed projectile penetrating a stiffened plate, and the results of the numerical simulation are compared with an experiment to verify the reliability of the numerical simulation method. The momentum method and mass equivalence method are used to predict the residual velocity of the projectile, and the applicability of different theoretical methods within different velocity ranges is compared. The deformation energy of different regions of the stiffened plate is then extracted to analyze the influence of the initial velocity of the projectile body on the energy absorption mode of the target plate. Finally, the structure of the stiffeners is changed and the influence of the relative position of the stiffeners on the penetration attitude of the projectile body is analyzed.[Results]The results show that the mass equivalence method is more accurate than the momentum method in predicting the residual velocity of the stiffened plate when the initial velocity of the projectile body is in the range of 300–900 m/s. The ratio of the deformation energy of the stiffened plate to the energy loss of the projectile body decreases with the increase of the initial velocity of the projectile body. The effect of a T-stiffened plate on trajectory is greater than that of a rectangular-stiffened plate.[Conclusions]The related calculation method and research results have certain reference value for research and engineering application surrounding the anti-penetration of stiffened plates. © 2023 Chinese Journal of Ship Research. All rights reserved.     

襄阳汉江沉管隧道设计关键技术北大核心CSCD

基于襄阳汉江沉管隧道的工程设计实践,针对该隧道强冲刷、强透水地层深厚、防洪要求高等特点,对隧道平纵布置、管节及接头止水结构、干坞选型及结构、沉管基础及回填、沉管最终接头及对接端止水结构等进行了研究。结果表明:(1)内河沉管隧道采用长距离双轴线干坞布置方式,通过格形地下连续墙、超深落底式帷幕、地下连续墙预应力锚索垂直支护和混凝土封底组合技术解决了强透水地层深基坑支护及隔水难题;(2)采用全断面顺浇技术进行整体式管节预制,实现了管节接头止水设施的全国产化;(3)在内河沉管隧道采用高精度浮式整平先铺卵石基础,并提出了强冲刷区管顶防冲保护解决方案;(4)采用了不设独立止推构造的陆域最终接头,并针对工程需求设置了大直径锁口钢管桩配合外侧止水墙的对接端支护结构及分片整体吊装双壁钢围堰二次止水结构。     

Galvanic corrosion behaviour of HE 20 / MDN 138 & HE 20 / MDN 250 alloys in natural seawater

In view of their excellent mechanical properties, workability and heat treatment characteristics, MDN 138 & MDN 250 have been widely used in missile, rocket and aerospace industries. With light weight and high performance characteristics HE 20 aluminium alloy acts as an important material in defence and aerospace applications. The galvanic corrosion behaviour of the metal combinations HE 20 / MDN 138 and HE 20 / MDN 250, with 1:1 area ratio, has been studied in natural seawater using the open well facility of CECRI’s Offshore Platform at Tuticorin for a year. The open circuit potentials of MDN 138, MDN 250 and HE 20 of the individual metal, the mixed potential and galvanic current of the couples HE 20 / MDN 138 and HE 20 / MDN 250 were periodically monitored throughout the study period. The calcareous deposits on MDN 138 and MDN 250 were analysed using XRD. The results of the study reveal that that HE 20 has offered required amount of protection to MDN 138 & MDN 250.     

A GIS‐based method to identify cost‐effective routes for rural deviated fixed route transit

Deviated fixed route transit (DFRT) service connecting rural and urban areas is a growing transportation mode in the USA. Little research has been done to develop frameworks for route design. A methodology to explore the most cost‐effective DFRT route is presented in this paper. The inputs include potential DFRT demand distribution and a road network. A heuristic is used to build possible routes by starting at urban cores and extending in all network directions in certain length increments. All the DFRT routes falling in the length range desired by the users are selected. The cost effectiveness of those routes, defined by operating cost per passenger trip, is compared. The most cost‐effective route is selected and presented in a GIS map. A case study illustrates the methodology in several Tennessee metropolitan regions. The most cost‐effective route length is case specific; some routes (e.g. those out of our Nashville case) are most cost effective when short, while others (e.g. those out of Memphis) are most cost effective when long. Government agencies could use the method to identify routes with the lowest operating cost per passenger given a route length or an operating cost budget. Copyright © 2016 John Wiley & Sons, Ltd.     

Mathematical model for optimising the sequence for clearing snow from the manoeuvring area during winter operations

This article considers the optimisation of the sequence for clearing snow from stretches of the manoeuvring area of an airport. This issue involves the optimisation of limited resources to remove snow from taxiways and runways thereby leaving them in an acceptable condition for operating aircraft. The airfield is divided into subsets of significant stretches for the purpose of operations and target times are established during which these are open to aircraft traffic. The document contains several mathematical models each with different functions, such as the end time of the process, the sum of the end times of each stretch and gap between the estimated and the real end times. During this process, we introduce different operating restrictions on partial fulfilment of the operational targets as applied to zones of special interest, or relating to the operation of the snow‐clearing machines. The problem is solved by optimisation based on linear programming. The article gives the results of the computational tests carried out on five distinct models of the manoeuvring area, which cover increasingly complex situations and larger areas. The mathematical model is particularised for the case of the manoeuvring area of Adolfo Suarez Madrid—Barajas Airport. Copyright © 2016 John Wiley & Sons, Ltd.

Highlights
• Optimal sequence for clearing snow from the manoeuvring area of an airport.
• Contains optimising algorithms solved using CPLEX LP‐based tree search.
• Restrictions on partial fulfilment of operational targets applied to subsets of significant stretches, used for planning the operation of snow‐clearing machines.
• Model applied to the case of the manoeuvring area of Adolfo Suárez Madrid Barajas Airport.
• Conclusions are given on the results of the computational tests carried out. There are five models of the manoeuvring area which cover increasingly complex situations and larger areas.

     

耐碰撞车辆的撞击性能

对耐碰撞车辆列车的撞击性能作了分析研究,并编制了解析大型塑性变形的动力学模拟程序。对进一步改进耐碰撞车辆的设计进行了讨论。     

��Ͻ�ͨ���ܶȲⶨ�����о�

交通流密度是衡量道路服务水平的指标之一. 当交通流中车辆长度和速度变化较大时,占有率则可以更好地反映交通流密度状况. 占有率的测定能够考虑到车辆的长度和速度变化,但是其值受到测量区域长度的影响,并且在混合交通情况下测量值缺乏准确性. 对于没有车道行驶规则的混合交通流,应当以整条路段为单位进行交通流分析. 因此本文提出了“区域占有率”的概念,且利用仿真技术验证其有效性. 对混合交通流条件下的占有率和区域占有率进行比较分析,区域占有率可以更合理地描述混合交通流的密度. 同时,得出混合交通条件下的区域占有率和交通流速度关系,证明了混合交通流条件下区域占有率提出的合理性和准确性.     

Crash protection of Hybrid Electrical Vehicles for amending the KMVSS No. 91

This paper explores issues related to the electrical safety of Hybrid Electrical Vehicles (HEVs) during and after various crash events. Japanese and American federal regulations regarding occupant protection against high voltages in Electric Vehicles (EVs) and HEVs were surveyed and analyzed in this study. Front, side and rear impact tests for two types of HEVs were conducted to investigate electrolyte spillage, the retention of the propulsion battery system and the electrical isolation of the occupant. The test results met the related criteria. The test procedures and the criteria for occupant protection established through this study were amended to Korean Motor Vehicle Safety Standard (KMVSS) No. 91 to add the crash protection of the EVs and the HEVs.     

Development of electrostatic diesel particulate matter filtration systems combined with a metallic Flow-Through Filter and electrostatic methods

A 3000 cc diesel engine attached to an engine dynamo was used to test three newly developed electrostatic Diesel Particulate matter filtration Systems (DPS 1, 2, and 3) under four steady-state engine operating conditions: idle, 2000 rpm with no load, and 2000 rpm under 25% and 50% loads. Of the two developed alternatives, DPS 1 and DPS 2, DPS 2 comprises an ionization section, electrostatic field additional section and Flow-Through Filter (FTF), which achieved almost 90% removal of particulate matter (PM) under the engine’s operating conditions, and the efficiency of the FTF was maintained between 20% and 50%. Comparing the long-term performance of DPS 2 and DPS 3 (effectively a serial combination of two DPS 2s) with a commercially-available Diesel Particulate Filter (DPF), the DPS 2 and DPS 3 achieved almost the same efficiency for removing PM as the DPF but had significantly improved (75%∼90% lower) differential pressure drops.