The Lateral Dynamics of Motorcycles and Bicycles

The paper is a review of the state of knowledge and understanding of the steering behaviour of single-track vehicles, with the main accent on vehicle design, and vehicle design analysis and behaviour prediction.

The body of the paper consists of a chronological account of the steps which have been taken in establishing the current position. Scientific study of the motions of two-wheelers has been in progress for more than 100 years, but progress was slow and many conflicting conclusions were drawn until increasing understanding of tyre mechanics, systematic application of the laws of motion for systems of rigid bodies, digital computation and modern numerical methods, and improved mobile measurement, recording, and data processing capabilities allowed the pace to accelerate.

The current position, which is that a good understanding of the relationship between design and performance has been achieved, but that by no means have all the problems of significance been solved, is described at the end of the paper.     

Effect of Traction Force Distribution Control on Vehicle Dynamics

The purpose of this study is to clarify vehicle dynamics effected by traction force distribution, not only between the front and rear wheels but also between the left and right wheels. Contribution of traction force distribution to vehicle turning performance was investigated using a mathematical simulation and an experimental vehicle. The results indicates that the control of traction control distribution between the left and right wheels greatly influences vehicle turning characteristics and improve the performance even in a marginal turning condition.     

Alternative systems for urban transport in India

This paper is in the context of studying alternative systems of urban transport in India to determine the costs and performance not only for public transport systems but also for the total transport scenario (i.e. for all vehicles) such that the economic costs are inclusive of costs of time (conservatively), accidents and pollution. In view of inherent deficiencies and delays associated with a traditional transport planning process and its implementation, the paper develops quick response land-use transport planning models for Indian cities to enable integrated, cost-efficient strategies to be evolved, recognizing that urban transport is a function of urban size, form, structure, socio-economic base, etc. A simple statistically significant demand model identified from a basis of appropriate data represents the recommended demand model for Indian cities. This model can be then conveniently used to project trip volume for any Indian city in a future year. A simple gravity model is used to generate the trip assignment for hypothesized city sizes, forms and structures. The results provide a fairly reasonable approximation for the major corridor trip volumes and lengths in the context of the transport requirement for the metropolitan cities in India in 2001 and 2011 A.D. The GOI Study Group arising from the investigations reported in this paper and the discounted cash-flow method of analysis made clear overall recommendations in February 1987 for cities of various populations.     

FE modeling method for a headform used in pedestrian protection simulations

Finite element models of headforms are used in experimental simulations of pedestrian protection. In this study, a quick and accurate method for FE modeling of the headforms was developed. This method entailed the initial definition of the dimensional parameters for the mass, centroid, and inertial moment properties of the headform. The equations governing these properties were constructed using the dimensional parameters as design variables. The dimensional parameters meeting the requirements of the relevant regulations were obtained by solving these three equations. A design optimization model was constructed for the material parameters of the outer part of the headform. In this model, the parameters of the material used in the FE model were considered as design variables; the difference between the peak acceleration in a side-impact simulation test and the average value of the regulated acceleration range was used as the objective function; the first-order natural frequency, which was required to be greater than 5,000 Hz, was defined as one of the constraints; the peak drop acceleration, which was required to be within the regulated range of values, was defined as the second constraint. The material parameters were obtained by solving the optimization model. These material parameters meet the dynamic requirements of the regulations for headforms. Based on these three parameters, an FE model of a headform can be constructed quickly and accurately.     

Influence of vehicular traffic on urban air quality – A case study of Hyderabad,India

In the present study, impact of vehicular traffic emissions on black carbon aerosol mass concentration, trace gases and ground reaching solar radiation were analyzed during nationwide truck strike of 5–12 January, 2009 over urban environment of Hyderabad, India. A significant reduction of about 57%, 60%, 40% and 50% was observed in black carbon, particulate matter, carbon monoxide and ozone respectively during nationwide truck strike period. Results of the study are important for source apportionment of pollutants as the strike created natural laboratory for studying the impact of diesel operated trucks on urban air quality.     

Assessing the CO2 impact of current and future rail track in the UK

This paper investigates the CO₂ impact of current and future UK rail track and estimates the material, process and transport emissions associated with construction, maintenance and end-of-life activities for designs at high and low traffic loads. Analysis shows that for current track configurations, track with concrete sleepers has the lowest CO₂ impact, followed by steel, hardwood and softwood. Several potential future rail track designs have been analysed including embedded rail and double and quadruple-headed rail. All future track designs have a lower impact than current designs, but this improvement is more marked at high traffic loads. Up to a 40% reduction in CO₂ impact could be achieved if the UK rail network was to move from conventional track design to a double-headed embedded rail design. Key levers for reducing the CO₂ impact of track are identified as service life extension, traffic load reduction and the selection of low impact track designs.     

自平衡法在文明特大桥桩基承载力试验中的应用

结合自平衡法在厦蓉高速公路文明特大桥钻孔灌注桩的承载力试验中的应用,详细阐释了自平衡测桩法的关键技术,总结了自平衡测试技术的施工经验,为同类桥梁的桩基试验提供了有益的借鉴。     

磨粒的三维测量与重构

在铁谱分析中引入计算机三维测量与重构技术,通过使用改进拉普拉斯算子对在普通光学显微镜下拍摄到的磨粒连续图像序列进行清晰度分析来测量磨粒表面高度,重构磨粒三维图像.在普通光学显微镜下快速、方便地获取磨粒表面三维图,使铁谱分析技术不再仅限于对磨粒图像的二维分析.     

TRANSCRIPTION ACTIVATION BY HBV PRE SI PROTEIN

ＴＲＡＮＳＣＲＩＰＴＩＯＮＡＣＴＩＶＡＴＩＯＮＢＹＨＢＶＰＲＥＳＩＰＲＯＴＥＩＮＸｉａｏＳｈｅｎｇｘｉａｎｇ；Ｔ．Ｓ．Ｂ．Ｙｅｎ（ＬａｂｏｒａｔｏｒｙｏｆＭｏｌｅｃｕｌａｒＰａｔｈｏｌｏｇｙ，ＤｅｐａｒｔｍｅｎｔｏｆＰａｔｈｏｌｏｇｙ，Ｕｎｉｖ．ｏｆ...