Performance analysis according to the combination of energy storage system for fuel cell hybrid vehicle

The need for the unmanned ground combat vehicle (UGCV), which is used for the surveillance, reconnaissance and targeting during extremely dangerous condition on the battlefield, has steadily increased, and the transition from manned ground combat vehicles to unmanned ground combat vehicles is expected to reduce the loss of lives during battle. The UGCV needs many types of capabilities to achieve satisfactory performance. This paper focuses on the modeling and control of the power system of the UGCV, and proposes the fuel cell hybrid system (FCHS) for the power system of the UGCV. The fuel cell hybrid system has many advantages in stealth drive and the system efficiency. In addition, the FCHS is much quieter than the engine generator and generates much less heat. The benefits of the FCHS are advantageous for use in Army operations, which require ‘silent watch’ capability and the ability to operate without showing up on an enemy’s radar screen. The FCHS has a fuel cell and uses an energy storage system (ESS) as a power source. The ESS (e.g., batteries or ultracapacitors) helps the fuel cell supply power to the electric drive system and also recovers energy during deceleration. The ESS makes it possible to improve the efficiency and dynamic characteristic of the power system. In this paper, the FCHS is composed of different combinations of component models. The component sizes are chosen to satisfy performance requirements. In order to determine the power distribution between the fuel cell and the ESS, a power management strategy based on the required power and the SOC (state of charge) of the ESS is proposed. Batteries and ultracapacitor, components of the ESS, have different characteristics. Accordingly, varying the combination of ESS components can change the performance of the power system. The performance of the FCHS with respect to different combinations of ESS is analyzed using simulated results.     

Emission analysis of a compressed natural gas directinjection engine with a homogenous mixture

In an era in which environmental pollution and depletion of world oil reserves are of major concern, emissions produced by automotive vehicles need to be controlled and reduced. An ideal solution is to switch to a cleaner fuel such as natural gas, which generates cleaner emissions. In addition, control over the in-cylinder air-fuel mixture can be best achieved through a direct-injection mechanism, which can further improve combustion efficiency. This need for cleaner automobiles provides the motivation for this paper’s examination of the use of computational fluid dynamic (CFD) simulations to analyze the concentrations of the exhaust gases produced by a compressed natural gas engine with a direct-fuel-injection system. In this work, a compressed natural gas direct-injection engine has been designed and developed through a numerical simulation using computational fluid dynamics (CFD) to provide an insight into complex in-cylinder behavior. The emissions analyzed in this study were carbon monoxide (CO), nitric oxide (NO) and carbon dioxide (CO₂), i.e. the main pollutants produced by natural gas combustion. Based on a stoichiometric mixture, the concentrations of CO and NO were computed using the dissociation of carbon dioxide and the extended Zeldovich mechanism. CO₂ was calculated using a mass balance of the species involved in the combustion process. The simulation results were then compared with the experimental data generated by a single-cylinder research engine test rig. A good agreement was obtained with the experimental data for the engine speeds considered for all emissions concentrations.     

Thermo-oxidative degradation of a carbon black compounded EPDM rubber hose

A method to measure the crosslink density of carbon black was used to analyze the aging behavior of a radiator hose made of carbon black filled EPDM (ethylene-propylene diene monomer) rubber under thermo-oxidative stresses. The crosslink density and the strength of the skin of the rubber specimens initially decreased slightly but then increased over time. The elongation at the break considerably reduced and did not show any similarity to the behaviors of the crosslink density. A possible cause of this reaction might be from the formation of rigid sulphoxide crosslinks and the crosslinks produced by the reaction of unvalcunized sulfurs. Aging the rubber specimens at 180°C caused a slight increase in the crosslink density and a large decrease in tensile strength and elongation. The aging experiment also caused a rapid increase of microhardness in the surface skin region. The formation of carbonyl groups in EPDM molecule chains and the formation of rigid sulphoxide crosslink, rather than the crosslink density variation, may have had a large influence. The changing behaviours of the mechanical properties, molecule chains and crosslinks showed significantly different characteristics in the skin and the interior with aging temperature and time.     

Relationship between occupant injury and the perturbation mark on the velocity indicator on a cluster panel

A perturbation mark is occasionally produced on the velocity indicator of the cluster panel of a vehicle during a vehicle collision. This mark can be used to estimate the velocity of the vehicle at the moment of the vehicle’s impact. In this study, the effect of the impact velocity and the deceleration of the vehicle on the perturbation mark were investigated, and an analysis of the driver’s injury was also conducted through a numerical pulse representation and computer simulations. Sled and pendulum tests were used to replicate the conditions that produce a perturbation mark on the velocity indicator of a cluster panel. It was verified that a higher peak acceleration is more likely than the impact velocity to cause a perturbation mark. According to the computer simulation results, a driver’s injury could be more severe at higher peak accelerations with a constant impact velocity. If a perturbation mark, which can be used to estimate the impact velocity, is found while investigating a vehicle accident, this mark reveals that the acceleration was higher than that listed in the related crash report. Therefore, the injuries of the occupants could be more serious than those expected at the reported impact velocity.     

Grande vitesse ferroviaire et développement économique local : une revue de la littérature

Many high-speed rail (HSR) projects exist in Europe and elsewhere in the world and generate many expectations: economic development, location of new firms and new population, development of tourism, effect on real estate. But these expectations are not always fulfilled. For academic researchers, the myth of the existence of a linear causality between transport infrastructures and spatial, social and economic transformations, according to which automatic effects will occur, has been challenged for a long time. But sometimes, new economic dynamism can be observed. The aim of this paper is to present a review of academic and non-academic literature in order to understand why there is a gap between the academic literature and the regional stakeholders’ expectations.     

Capacity estimation of torque converters with piston holes using the response surface method and an artificial neural network

In new slim torque converters, lock-up clutches are used to provide high fuel efficiency at low speed. However, the slimness of the converters causes difficulty in heat dissipation, which may damage the friction material and shorten its life span. A cooling hole in the lock-up piston reduces the heat but also reduces the torque because oil flows through the hole due to the pressure difference between the two faces of the piston. In the early stages of the development of this type of torque converter, designers must consider the minimum flow rate required to cool the friction material and the minimum torque capacity required to transmit the engine torque. This research explored two methods of estimating these parameters. In the first method, an estimation equation was derived by combining the response surface method with physical properties such as the centrifugal force, a sudden expansion, a sudden contraction, and the steady flow energy equation. The second method involved the use of an artificial neural network. The feasibility of the estimates based on statistics and on the artificial neural network were confirmed in the design stage by comparing experimental and estimated data. An estimation program was created using the C#.Net language and has been used for actual torque converter designs by the Korea Powertrain Company.     

Analyzing aviation safety: Problems,challenges, opportunities

This paper reviews the economic literature relating to aviation safety; analyzes the safety record of commercial passenger aviation in the United States and abroad; examines aviation security as a growing dimension of aviation safety; and identifies emerging issues in airline safety and challenges for aviation safety research. Commercial airline safety has improved dramatically since the industry's birth over a century ago. Fatal accident rates for large scheduled jet airlines have fallen to the level where (along many dimensions) aviation is now the safest mode of commercial transportation. However, safety performance has not been evenly distributed across all segments of commercial aviation, nor among all countries and regions of the world. The finding that developing countries have much poorer safety records has been a persistent conclusion in aviation safety research and continues to be the case. Unfortunately, operations data are not available for many of the airlines that experience fatal accidents, so it is not possible to calculate reliable fatality rates for many segments of the worldwide aviation industry. Without more complete information, it will likely be difficult to make substantial improvements in the safety of these operations. Challenges to improving aviation security include: how much to focus on identifying the terrorists as opposed to identifying the tools they might use; determining how to respond to terrorist threats; and determining the public versus private roles in providing aviation security. The next generation of safety challenges now require development and understanding of new forms of data to improve safety in other segments of commercial aviation, and moving from a reactive, incident-based approach toward a more proactive, predictive and systems-based approach.     

Future cost scenarios for reduction of ship CO2 emissions

International shipping is a significant contributor to Global Greenhouse Gas (GHG) emissions, responsible for approximately 3% of global CO₂ emissions. The International Maritime Organization is currently working to establish GHG regulations for international shipping and a cost effectiveness approach has been suggested to determine the required emission reductions from shipping. To achieve emission reductions in a cost effective manner, this study has assessed the cost and reduction potential for present and future abatement measures based on new and unpublished data. The model used captures the world fleet up to 2030, and the analysis includes 25 separate measures. A new integrated modelling approach has been used combining fleet projections with activity-based CO₂ emission modelling and projected development of measures for CO₂ emission reduction. The world fleet projections up to 2030 are constructed using a fleet growth model that takes into account assumed ship type specific scrapping and new building rates. A baseline trajectory for CO₂ emission is then established. The reduction potential from the baseline trajectory and the associated marginal cost levels are calculated for 25 different emission reduction measures. The results are given as marginal abatement cost curves, and as future cost scenarios for reduction of world fleet CO₂ emissions. The results show that a scenario in which CO₂ emissions are reduced by 33% from baseline in 2030 is achievable at a marginal cost of USD 0 per tonne reduced. At this cost level, emission in 2010 can be reduced by 19% and by 24% in 2020. A scenario with 49% reduction from baseline in 2030 can be achieved at a marginal cost of USD 100 per tonne (27% in 2010 and 35% in 2020). Furthermore, it is evident that further increasing the cost level beyond USD 100 per tonne yield very little in terms of further emission reduction. The results also indicate that stabilising fleet emissions at current levels is obtainable at moderate costs, compensating for fleet growth up to 2030. However, significant reductions beyond current levels seem difficult to achieve. Marginal abatement costs for the major ship types are also calculated, and the results are shown to be relatively homogenous for all major ship types. The presented data and methodology could be very useful for assisting the industry and policymakers in selecting cost effective solutions for reducing GHG emissions from the world fleet.     

采用沿岸动力概念以减少埃及红海海域高速船燃料消耗与降低排放(英文)

The progress of economic globalization,the rapid growth of international trade,and the maritime transportation has played an increasingly significant role in the international supply chain.As a result,worldwide seaports have suffered from a central problem,which appears in the form of massive amounts of fuel consumed and exhaust gas fumes emitted from the ships while berthed.Many ports have taken the necessary precautions to overcome this problem,while others still suffer due to the presence of technical and financial constraints.In this paper,the barriers,interconnection standards,rules,regulations,power sources,and economic and environmental analysis related to ships,shore-side power were studied in efforts to find a solution to overcome his problem.As a case study,this paper investigates the practicability,costs and benefits of switching from onboard ship auxiliary engines to shore-side power connection for high-speed crafts called Alkahera while berthed at the port of Safaga,Egypt.The results provide the national electricity grid concept as the best economical selection with 49.03 percent of annual cost saving.Moreover,environmentally,it could achieve an annual reduction in exhaust gas emissions of CO2,CO,NOx,P.M,and SO2by 276,2.32,18.87,0.825 and 3.84 tons,respectively.     

Coastal Zone Management: Using No-Build Areas to Protect the Shorefront

Five coastal counties in Florida were studied to assess the effect of state-mandated local comprehensive plan policies on hurricane evacuation clearance times and public shelter demand. Numbers of residential units in 2002 and at the time of plan approval were estimated from property parcel data. Abbreviated transportation models were used to calculate 2002 evacuation times and shelter demand and to ascertain the impacts of post-plan residential growth within hurricane hazard areas. Calculated increases in clearance times and shelter demand are not in concert with the state's mandate to maintain or reduce clearance times. State law currently limits the leverage of the state planning agency to compel local governments to implement the required comprehensive plan policies. We recommend a concurrency management strategy that parallels the state's requirement to provide adequate transportation facilities to accommodate the impacts of future residential growth. Such a policy could be employed in other states as well.