Design and simuation of a vehicle test bed based on intelligent transport systems

As growing demand of vehicle safety system, especially regarding intelligent transport systems (ITS), automotive manufacturers are focusing more on driving safety and efficient transportation for vehicle users. Many safety systems have been launched in the market recently so, it is important to evaluate the vehicle safety systems and ITS. The ITS based intelligent vehicle test bed was constructed to meet the growing demand of test and verification for such ADAS and ITS systems. First, this paper describes in detail concept of the test-bed. This test-bed is carefully designed to meet the requirements of ISO/TC204 standards. In order to verify the design of the test-bed, virtual test with driving siulator was processed on a virtual test tracks. This test-bed will be used to conduct testing on various ITS and ADAS technologies, such as adaptive cruise control (ACC), lane departure warning system (LDWS), cooperative intersection warning system as well as rollover stability control (RSC) and electronic stability control (ESC), etc.     

Analysis of disc brake instability due to friction-induced vibration using a distributed parameter model

This paper deals with friction-induced vibration of a disc brake system with a constant friction coefficient. A linear, lumped, and distributed parameter model to represent the floating caliper disc brake system is proposed. The complex eigenvalues are used to investigate the dynamic stability, and, in order to verify simulations which are based on the theoretical model, an experimental modal test and dynamometer test are performed. The comparison of experimental and theoretical results shows good agreement, and the analysis indicates that modal coupling due to friction forces is responsible for disc brake squeal. Also, squeal type instability is investigated, using a parametric analysis. This indicates which parameters have influence on the propensity of brake squealing. This is helpful for validating the analysis model and establishing confidence in the experimental results of the modified system. These results may also be useful during system development or diagnostic analysis.     

Fatigue design approach for the spot-welded T-type member using a simulated single spot-welded joint

In order to develop a fatigue design method for actual railroad car and commercial vehicle body structures using the fatigue data of simulated single spot-welded lap joints, we first analyzed the stress distribution and evaluated fatigue strength of spot-welded T-type members that are the components of actual railroad car and commercial vehicle body structures. Next, fatigue design approach of these members using the fatigue data of single spot-welded lap joints was investigated. From our results, we found that, even though there was a quantitative difference of fatigue strength between the single spot-welded joint and the actual members over the same number of fatigue cycles, through the use of appropriate correction, the fatigue design criterion of actual spot-welded members, such as those used in railroad car and commercial vehicle body, can be predicted using the fatigue strength of single spot-welded joint.     

Excitation force analysis of a powertrain based on CAE technology

The excitation force of a powertrain is one of major sources of interior noise in a vehicle. This paper presents a novel approach to predict the interior noise caused by the vibration of the powertrain by using the hybrid TPA (transfer path analysis) method. Although the traditional transfer path analysis (TPA) is useful for the identification of powertrain noise sources, it is difficult to modify the structure of a powertrain by using experiments for the reduction of vibration and noise. In order to solve this problem, the vibration of the powertrain in a vehicle is numerically analyzed by using the finite element method (FEM). The vibration of the other parts of the vehicle is investigated by using experiments based on vibrato-acoustic transfer function (VATF) analysis. These two methods are combined for the prediction of interior noise caused by a powertrain. Throughout this research, two papers are presented. This paper presents a simulation of the excitation force of the powertrain exciting the vehicle body based on numerical simulation. The other paper presents a prediction of interior noise based on the hybrid TPA, which uses the VATF of the car body and the excitation force predicted in this paper.     

Vehicle stability control system for enhancing steerabilty,lateral stability,and roll stability

The Vehicle stability control system is an active safety system designed to prevent accidents from occurring and to stabilize dynamic maneuvers of a vehicle by generating an artificial yaw moment using differential brakes. In this paper, in order to enhance vehicle steerability, lateral stability, and roll stability, each reference yaw rate is designed and combined into a target yaw rate depending on the driving situation. A yaw rate controller is designed to track the target yaw rate based on sliding mode control theory. To generate the total yaw moment required from the proposed yaw rate controller, each brake pressure is properly distributed with effective control wheel decision. Estimators are developed to identify the roll angle and body sideslip angle of a vehicle based on the simplified roll dynamics model and parameter adaptation approach. The performance of the proposed vehicle stability control system and estimation algorithms is verified with simulation results and experimental results.     

全球安全系统市场远景(二)

行人保护系统产品提供：发动机罩提升,主动安全保险杠概念,行人安全气囊由汽车零部件供应商与汽车制造商联合研发的一个伟大的发明,正逐步进入行人保护系统的领域。目前研发主要针对重新设计的汽车,以最大限度地减少在碰撞车祸时行人     

Effect of UWS injection at low exhaust gas temperature on NO<Subscript>x</Subscript> removal efficiency of diesel engine

Urea-SCR systems have been widely used in diesel vehicles according to the strengthened NO_x (Nitrogen Oxides) emission standard. The NO_x removal efficiencies of the latest well optimized urea-SCR system are above 90 % at moderate exhaust gas temperature of 250 ~ 450 °C. However, a large amount of NO_x is emitted from diesel vehicles at cold start or urban driving conditions, when the exhaust gas temperature is not high enough for SCR catalyst activation. Although many researchs have been stuied to improve NO_x conversion efficiency at these low temperature conditions, it is still one of important technical issues. In this study, the effect of UWS injection at low exhaust gas temperature conditions is studied. This study uses a 3.4 L diesel engine equipped with a commertial urea SCR system. As a result, it is found that about 5 % of NO_x removal efficiency is improved in the NRTC test when UWS injection starts at the SCR inlet temperature of 150 °C compared to 200 °C. It is also found that urea deposits can be formed on the wall of exhaust pipe, when the local wall temperature is lower than temperature of urea decomposition.     

Development of hydrogen-compressed natural gas blend engine for heavy duty vehicles

Natural gas fuel, as an alternative energy source of transportation, has been used widely since it has an advantage of low emission levels. However, new technologies are required in order to meet the reinforced emission regulations. For this purpose, research into the development of hydrogen-compressed natural gas (HCNG) blend engine was carried out to evaluate its feasibility and emission characteristics. The Engine Research Department at the Korea Institute of Machinery and Materials carried out a large number of tests based on various parameter changes that could affect the performance and emission of HCNG engine in different operating conditions. An earlier stage of the research project focused on the lean combustion of a HCNG engine for heavy duty vehicles to meet the EURO-VI standards. An 11-L/6-cylinder CNG engine was used for the test. The effects of the excess air ratio change were assessed based on various content ratios of hydrogen in the natural gas fuel. In the later part of the HCNG research, a stoichiometric mixture operation was suggested to meet reinforced emission regulation without requiring a De-NOx system. Additionally, an exhaust gas recirculation (EGR) system was introduced for the purpose of improving thermal efficiency and durability. The optimal operating conditions were selected to achieve the best thermal efficiency to meet the required emission levels. In this paper, we demonstrate that a HCNG engine can achieve a significant decrease in NOx emissions, as compared to that of a CNG engine, while meeting the requirements of the EURO-VI standards during a transient mode cycle test. EGR can suppress the weakness of stoichiometric mixture combustion strategy, such as the deterioration of the durability and thermal efficiency, while the emission level can be lowered with the use of a three-way catalyst. The possibility of further reduction of emissions and CO2 with EGR was evaluated to access practical application of a HCNG engine in the field. From that evaluation, the HCNG engine with stoichiometric mixture operation for heavy duty vehicles was developed. The emission levels of HCNG engine were 50 % lower when compared to the EURO-VI standards with a greater than 10 % decrease in CO₂ compared to that of a natural gas engine.     

Restructuring of the economy and its impacts on the Korean maritime industry

The Korean government has made many efforts to repair the damage done by the financial crisis since November 1997. The restructuring programmes for the Korean economy, including chaebols' (i.e. family-controlled conglomerates) restructuring, have impacted in many ways on the shipping, shipbuilding and port sectors. This is because major shipping lines, shipyards, and recent privatization and operation of container terminals have closely been related to chaebols. This paper is concerned with the impacts of the Korean financial crisis on the shipping, shipbuilding, and port sector, with restructuring of the economy and chaebols.     

Computational investigation of cavitation on a semi-spade rudder

This article examines noncavitating and cavitating flow fields around a semi-spade rudder in the ship wake and propeller slipstream based on a computational method. The article seeks to explain the erosion that can occur around the gap due to cavitation; such erosion has been reported to occur while a ship is at sea. Another area of research is the effect of the gap size and shape. The effects of erosion-evading devices such as elongated gap edges, an increased edge radius, flow control projections, and vertical and horizontal guide plates were also studied.