On the observability of the fortnightly cycle of the Tagus estuary turbid plume using MODIS ocean colour images

Using three years (2003 to 2005) of MODIS-Aqua normalized water-leaving radiance at 551 nm this paper shows a fortnightly cycle in the Tagus estuary turbid plume. The Tagus estuary is one of the largest estuaries of the west coast of Europe and is located in the most populated area of Portugal, including the capital Lisbon. The turbid plume has been detected by the backscattering characteristics of the surface waters in the vicinity of the estuary mouth. In fortnightly scales, the turbid plume has smaller dimensions during and after neap tides and higher dimensions during and after spring tides. This is most probably associated with the fortnightly spring–neap tidal cycle and the consequent increase in turbidity inside the estuary during spring tides. During the summer weak spring tides (tidal amplitude approximately 2.5 m) no turbid plume is observed for an entire fortnightly cycle. Outside the summer months, precipitation, river discharge and winds, were found to increase the turbid area, but the fortnightly cycle appears to be superimposed on the large time-scale variability, and present throughout the year.     

Propagating buckles in corroded pipelines

Rigid–plastic solutions for the steady-state, quasi-static buckle propagation pressure in corroded pipelines are derived and compared to finite element predictions (ABAQUS). The corroded pipeline is modeled as an infinitely long, cylindrical shell with a section of reduced thickness that is used to describe the corrosion. A five plastic hinge mechanism is used to describe plastic collapse of the corroded pipeline. Closed-form expressions are given for the buckle propagation pressure as a function of the amount of corrosion in an X77 steel pipeline. Buckles that propagate down the pipeline are caused by either global or snap-through buckling, depending on the amount of corrosion. Global buckling occurs when the angular extent of the corrosion is greater than 90°. When the angular extent is less than 90° and the corrosion is severe, snap-through buckling takes place. The buckle propagation pressure and the corresponding collapse modes also compare well to finite element predictions.     

Mesoscale subduction at the Almeria–Oran front: Part 1: Ageostrophic flow

This paper presents a detailed diagnostic analysis of hydrographic and current meter data from three, rapidly repeated, fine-scale surveys of the Almeria–Oran front. Instability of the frontal boundary, between surface waters of Atlantic and Mediterranean origin, is shown to provide a mechanism for significant heat transfer from the surface layers to the deep ocean in winter. The data were collected during the second observational phase of the EU funded OMEGA project on RRS Discovery cruise 224 during December 1996. High resolution hydrographic measurements using the towed undulating CTD vehicle, SeaSoar, traced the subduction of Mediterranean Surface Water across the Almeria–Oran front. This subduction is shown to result from a significant baroclinic component to the instability of the frontal jet. The Q-vector formulation of the omega equation is combined with a scale analysis to quantitatively diagnose vertical transport resulting from mesoscale ageostrophic circulation. The analyses are presented and discussed in the presence of satellite and airborne remotely sensed data; which provide the basis for a thorough and novel approach to the determination of observational error.     

Quasi-two-dimensional flow on the polar β-plane: Laboratory experiments

Geophysical turbulence is strongly affected by the variation of the Coriolis parameter with latitude. This variation results in the so-called β-effect, which forces energy from small-scales to be transferred preferentially into zonal motions. This effect results in the formation of narrow jet-like zonal flows that dominate the dynamics and act as transport barriers. Here, laboratory experiments are used to reproduce this effect in decaying turbulent flows. An electromagnetic cell is used to generate an initial field of vorticity in a rotating tank. Under conditions of quasi-geostrophic flow, the β-effect is produced by depth variation of the flow instead of variation of the Coriolis parameter. The effects of changing the container geometry and the overall fluid depth on the production of jets are investigated. The results suggest that this laboratory configuration can be used to model jet formation in the oceans and that increasing fluid depth is a practical way to decrease viscous effects.     

Second-order perturbation added mass fluctuation on vertical vibration of tension leg platforms

Total motion in waves can be considered as a superposition of the motion of the body in still water and the forces on the restrained body. In this study the effect of added mass fluctuation on vertical vibration of tension leg platforms (TLP) in the case of vibration in still water for both free and forced vibration subjected to axial load at the top of the leg is presented. This effect is more important when the amplitude of vibration is large. Also this is important in fatigue life study of tethers. The structural model used here is very simple. Perturbation method is used to formulate and solve the problem. First- and second-order perturbations are used to solve the free and forced vibrations, respectively.     

Development of Green-Naghdi models with a wave-absorbing beach for nonlinear, irregular wave propagation

Two-dimensional and three-dimensional Green-Naghdi (GN) models equipped with a numerical wave-absorbing beach have been developed to simulate nonlinear, regular, and irregular wave propagation. The numerical beach is introduced near the downstream boundary to absorb outgoing waves. An appropriate amount of numerical damping and an appropriate length of numerical beach are investigated using numerical experiments. The results show that the GN models with a numerical beach work very well in simulating wave propagation in water in a small computational domain.     

A line impedance stabilization network for pulse current injection北大核心CSCD

［Objective］Aiming at the deficiency of the existing line impedance stability network (LISN) in the electromagnetic pulse protection capability, a LISN suitable for the pulse current injection (PCI) test of electrical and electronic equipment is proposed. ［Methods］Aiming at the characteristics of high peak value and fast rise of the pulse current in PCI testing, the circuit structure and physical structure of the LISN are improved on the existing basis through PSpice time-domain and frequency-domain simulation combined with engineering design requirements, thereby giving it good nanosecond pulse protection performance and impedance stability at the same time. Pulse current protection performance test and impedance curve test experiments are then designed and carried out.［Results］The experimental results show that the improved LISN can attenuate the injected pulse current by 60 times, while the error of its impedance curve is less than 5% compared with the Type 5 µH LISN in GJB 151B-2013. ［Conclusions］The proposed LISN has good impedance stability and decoupling ability, and can be used in the PCI testing of electrical and electronic equipment in order to protect the power supply and improve the repeatability of testing. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Survey of ship platoon cooperative control北大核心CSCD

船舶列队是未来水路运输的重要方式。分析船舶列队协同控制的特点和原理;从船−岸协同交互、列队控制模型、列队运动控制、列队典型应用等4个方面分别进行现状分析与梳理。总结当前船舶列队控制技术瓶颈,包括人机共驾控制、列队控制运动不确定性建模、列队协同控制一致性、通信受限下船舶列队鲁棒控制及一致性控制等。最后,指出未来的船舶列队协同控制发展,应重点解决基于数据驱动与机理融合的列队运动建模、基于生物群体机制的船舶列队控制、基于分层控制的船舶列队控制等关键问题。     

Assessing a maritime service website prototype in a ship bridge simulator: navigators’ experiences and perceptions of novel e-Navigation solutions

The aim of this study was to assess proof of concept and usability of a maritime service website prototype in a full-mission ship bridge simulator through Swedish mariners’ experiences and perceptions. This test was part of the European Commission’s EfficienSea2 project for e-navigation. The prototype was intended as an aid to existing standard systems and methodologies for planning, executing and monitoring voyages. The study began with 5 days of simulator trials focused on today’s standard practices. This served as a baseline to compare to subsequent 4 days of simulator trials testing the prototype. For data collection, observations, video footage, interviews, and eye tracking were used. Data analysis included breaking apart the qualitative data to capture the perceptions of the participants, and a preliminary analysis of eye-tracking data as a complement. The results suggested that the prototype could be more suitable for a route planning stage, that the participants were familiar with similar existing solutions from other manufacturers, and that the contents of the tool would be most beneficial if integrated within the Electronic Chart Display and Information Systems (ECDIS). There is a pressing need for the novel solutions to be user needs-driven, integrated with the existing technologies, and standardized across the domain, and these processes must go hand-in-hand with accounting for all involved stakeholders, procedures, regulations, and training, as this will alter the course of shipping.     

Effect of fatigue strain range on properties of high-strength structural steel

Ship hulls are built with stiffened steel plates and experience continuous fatigue load cycles when in service. Mechanical properties of the steel are expected to change due to the application of these cyclic loads. Therefore, the mechanical properties of the material at various levels of fatigue damage need to be understood. This paper presents two test series that were conducted to determine the effect of two different strain ranges (2000 and 3000 micro strains) of fatigue cycles on the mechanical properties of high-strength structural steel. The test results indicate that the cycle-dependent behaviours of the material can cause a slight increase or a significant decrease in the yield strength when compared to its virgin state. However, the ductility of the steel does not change much as the strain cycle increases.