Gantry crane operations to transfer containers between trains: A simulation study of a Spanish terminal

Freight transfer operations are critical in combined transport networks. In this paper a simulation model and modelling approach to the transfer of cargo between trains at rail terminals is presented. The model is used to study the Port-Bou terminal, the main intermodal terminal at the Spanish-French frontier. Four different gantry crane operation modes to interchange containers between trains are evaluated. These operation rules are tested in several scenarios to examine the critical factors of the system and the best operation rule for each situation. Latest generation software is used to develop the model that incorporates modular programming and enhanced graphic systems for output representation. It allows a dynamic display of the simulated system and, likewise, the possibility of developing modules that can be reused in other studies. The research shows how simulation can be a useful planning tool in the rail transportation context.     

CO2 air–sea disequilibrium and preformed alkalinity in the Pacific and Indian oceans calculated from subsurface layer data

This work estimates new regionalized empirical parameterizations for preformed alkalinity (A_T^o) and the CO₂ air–sea disequilibrium (?C_dis). Both are key terms for the computation of anthropogenic CO₂ in the back-calculation methods. Data from the subsurface layer (75–180 m depth range) covering an area from North to South and from 19°E to 67.5°W (Pacific and Indian oceans) were taken from GLODAP (The Global Ocean Data Analysis Project) database. The subsurface layer is proved as a reliable reference for representing the main characteristics of the different water masses of the oceans. Besides, handing data from the two ocean basins altogether makes the new parameterizations of A_T^o and ?C_dis to be more globally consistent. Nevertheless, each ocean basin, at least in some regions, has different oceanographic characteristics based on its proper dynamical processes and water masses formation. In order to maintain each ocean basin ‘identity’ the whole domain was divided in six different regions (two of them sharing waters from Pacific and Indian oceans) and parameterizations in each region for both terms were obtained. Previously, data were transformed into a grid of 4°lat. × 5°lon. and the results obtained from the parameterizations were visualized and compare with pCO₂ climatologies. From the comparisons with previous ?C_dis estimations good results are obtained showing the reliability and robustness of the new regionalized empiric parameterizations.     

Connected cruise control: modelling,delay effects,and nonlinear behaviour

Connected vehicle systems (CVS) are considered in this paper where vehicles exchange information using wireless vehicle-to-vehicle (V2V) communication. The concept of connected cruise control (CCC) is established that allows control design at the level of individual vehicles while exploiting V2V connectivity. Due to its high level of modularity the proposed design can be applied to large heterogeneous traffic systems. The dynamics of a simple CVS is analysed in detail while taking into account nonlinearities in the vehicle dynamics as well as in the controller. Time delays that arise due to intermittencies and packet drops in the communication channels are also incorporated. The results are summarised using stability charts which allow one to select control gains to maintain stability and ensure disturbance attenuation when the delay is below a critical value.     

Use of a probabilistic particle tracking model to simulate the Prestige oil spill

A probabilistic particle tracking model is used to simulate the oil dispersion after the Prestige wreckage. This oil spill constitutes a suitable benchmark to analyze the capabilities of a probabilistic model, since the time elapsed from wreckage to oil landing (12 days) is much longer than the reliability time associated with forecast winds, usually on the order of 3–4 days. The particle model can be run in two different modes: real time mode (when existing reliable wind fields for the event under scope) and in probabilistic mode (in absence of reliable wind fields but with historical fields corresponding to a similar period). The validity of the particle model is first evaluated in a hindcast way, running the Prestige case with the wind fields corresponding to the period November 19 to November 30, 2002, which were not available at the moment of the wreckage. Calculations show the accuracy of the model to provide the right impact point and timing. The probabilistic model is then used to simulate the same event by means of historical data. The region where the oil landed is shown to be the area with the highest probability to be impacted.     

Train-Track Interaction and Mechanisms of Irregular Wear on Wheel and Rail Surfaces

Summary High-frequency train-track interaction and mechanisms of wheel/rail wear that is non-uniform in magnitude around/along the running surface are surveyed. Causes, consequences and suggested remedies to relieve the problems are discussed for three types of irregular wheel/rail wear: (1) short-pitch rail corrugation on tangent tracks and large radius curves, (2) wheel corrugation as caused by tread braking, and (3) wheel polygonalisation. The state-of-the-art in modelling of dynamic train-track interaction in conjunction with prediction of irregular wear is reviewed.     

砂井联合超载预压控制软土地基路基工后沉降的优化设计

以经济效益为目标函数,软土地基路基工后沉降、沉降速率双控制指标为约束条件,建立了砂井联合超载预压处理软土地基的优化设计模型。通过一实例,采用遗传算法对控制工后沉降的3个主要设计参数:砂井间距、超载量和预压时间进行了优化求解。按优化的参数结果表明,通常情况下铺轨时加固区主固结沉降已完成,地基的工后主固结沉降大小主要取决于砂井底部的受压土层,控制的主要参数为超载量和预压时间,同时表明了作者所采用方法的有效性。     

车辆在线监测系统 在受电弓检测中的应用

以南京地铁1号线车辆的在线检测系统中的受电弓在线监测系统为主要对象,论述其组成结构、工作过程和工作原理。在线检测系统通过图像采集、分析,实时反馈列车受电弓的工作状态;利用图形分析技术,及时发现受电弓故障并立即报警,避免弓网事故的发生。实际使用表明,该系统可以降低受电弓检查的成本,提高受电弓检修的效率,避免受电弓带故障运行,提升运营质量,保证正线的运营安全。     

A combined destination and route choice model for a bicycle sharing system

This paper studies the supply variables that influence the destination and route choices of users of a bicycle sharing system in the Chilean city of Santiago. A combined trip demand logit model is developed whose explanatory variables represent attributes relating to the topology of the possible routes and other characteristics such as the presence of bikeways, bus service and controlled intersections. The data for the explanatory variables and system users were collected through field surveys of the routes and interviews conducted at the system stations. The results of the model show that proximity to stops on the Santiago Metro and the existence of bikeways are the main factors influencing destination and route choices. Also indicated by the model estimates are gender differences, a preference for tree-lined routes and an avoidance of routes with bus services. Finally, the outcomes reveal considerable potential for the integration of bicycle sharing systems with Metro transit.     

Mathematical model for optimising the sequence for clearing snow from the manoeuvring area during winter operations

This article considers the optimisation of the sequence for clearing snow from stretches of the manoeuvring area of an airport. This issue involves the optimisation of limited resources to remove snow from taxiways and runways thereby leaving them in an acceptable condition for operating aircraft. The airfield is divided into subsets of significant stretches for the purpose of operations and target times are established during which these are open to aircraft traffic. The document contains several mathematical models each with different functions, such as the end time of the process, the sum of the end times of each stretch and gap between the estimated and the real end times. During this process, we introduce different operating restrictions on partial fulfilment of the operational targets as applied to zones of special interest, or relating to the operation of the snow‐clearing machines. The problem is solved by optimisation based on linear programming. The article gives the results of the computational tests carried out on five distinct models of the manoeuvring area, which cover increasingly complex situations and larger areas. The mathematical model is particularised for the case of the manoeuvring area of Adolfo Suarez Madrid—Barajas Airport. Copyright © 2016 John Wiley & Sons, Ltd.

Highlights
• Optimal sequence for clearing snow from the manoeuvring area of an airport.
• Contains optimising algorithms solved using CPLEX LP‐based tree search.
• Restrictions on partial fulfilment of operational targets applied to subsets of significant stretches, used for planning the operation of snow‐clearing machines.
• Model applied to the case of the manoeuvring area of Adolfo Suárez Madrid Barajas Airport.
• Conclusions are given on the results of the computational tests carried out. There are five models of the manoeuvring area which cover increasingly complex situations and larger areas.