Effect of UWS injection at low exhaust gas temperature on NO<Subscript>x</Subscript> removal efficiency of diesel engine

Urea-SCR systems have been widely used in diesel vehicles according to the strengthened NO_x (Nitrogen Oxides) emission standard. The NO_x removal efficiencies of the latest well optimized urea-SCR system are above 90 % at moderate exhaust gas temperature of 250 ~ 450 °C. However, a large amount of NO_x is emitted from diesel vehicles at cold start or urban driving conditions, when the exhaust gas temperature is not high enough for SCR catalyst activation. Although many researchs have been stuied to improve NO_x conversion efficiency at these low temperature conditions, it is still one of important technical issues. In this study, the effect of UWS injection at low exhaust gas temperature conditions is studied. This study uses a 3.4 L diesel engine equipped with a commertial urea SCR system. As a result, it is found that about 5 % of NO_x removal efficiency is improved in the NRTC test when UWS injection starts at the SCR inlet temperature of 150 °C compared to 200 °C. It is also found that urea deposits can be formed on the wall of exhaust pipe, when the local wall temperature is lower than temperature of urea decomposition.     

Development of hydrogen-compressed natural gas blend engine for heavy duty vehicles

Natural gas fuel, as an alternative energy source of transportation, has been used widely since it has an advantage of low emission levels. However, new technologies are required in order to meet the reinforced emission regulations. For this purpose, research into the development of hydrogen-compressed natural gas (HCNG) blend engine was carried out to evaluate its feasibility and emission characteristics. The Engine Research Department at the Korea Institute of Machinery and Materials carried out a large number of tests based on various parameter changes that could affect the performance and emission of HCNG engine in different operating conditions. An earlier stage of the research project focused on the lean combustion of a HCNG engine for heavy duty vehicles to meet the EURO-VI standards. An 11-L/6-cylinder CNG engine was used for the test. The effects of the excess air ratio change were assessed based on various content ratios of hydrogen in the natural gas fuel. In the later part of the HCNG research, a stoichiometric mixture operation was suggested to meet reinforced emission regulation without requiring a De-NOx system. Additionally, an exhaust gas recirculation (EGR) system was introduced for the purpose of improving thermal efficiency and durability. The optimal operating conditions were selected to achieve the best thermal efficiency to meet the required emission levels. In this paper, we demonstrate that a HCNG engine can achieve a significant decrease in NOx emissions, as compared to that of a CNG engine, while meeting the requirements of the EURO-VI standards during a transient mode cycle test. EGR can suppress the weakness of stoichiometric mixture combustion strategy, such as the deterioration of the durability and thermal efficiency, while the emission level can be lowered with the use of a three-way catalyst. The possibility of further reduction of emissions and CO2 with EGR was evaluated to access practical application of a HCNG engine in the field. From that evaluation, the HCNG engine with stoichiometric mixture operation for heavy duty vehicles was developed. The emission levels of HCNG engine were 50 % lower when compared to the EURO-VI standards with a greater than 10 % decrease in CO₂ compared to that of a natural gas engine.     

Design and simuation of a vehicle test bed based on intelligent transport systems

As growing demand of vehicle safety system, especially regarding intelligent transport systems (ITS), automotive manufacturers are focusing more on driving safety and efficient transportation for vehicle users. Many safety systems have been launched in the market recently so, it is important to evaluate the vehicle safety systems and ITS. The ITS based intelligent vehicle test bed was constructed to meet the growing demand of test and verification for such ADAS and ITS systems. First, this paper describes in detail concept of the test-bed. This test-bed is carefully designed to meet the requirements of ISO/TC204 standards. In order to verify the design of the test-bed, virtual test with driving siulator was processed on a virtual test tracks. This test-bed will be used to conduct testing on various ITS and ADAS technologies, such as adaptive cruise control (ACC), lane departure warning system (LDWS), cooperative intersection warning system as well as rollover stability control (RSC) and electronic stability control (ESC), etc.     

Wheel slide protection control using a command map and Smith predictor for the pneumatic brake system of a railway vehicle

In railway vehicles, excessive sliding or wheel locking can occur while braking because of a temporarily degraded adhesion between the wheel and the rail caused by the contaminated or wet surface of the rail. It can damage the wheel tread and affect the performance of the brake system and the safety of the railway vehicle. To safeguard the wheelset from these phenomena, almost all railway vehicles are equipped with wheel slide protection (WSP) systems. In this study, a new WSP algorithm is proposed. The features of the proposed algorithm are the use of the target sliding speed, the determination of a command for WSP valves using command maps, and compensation for the time delay in pneumatic brake systems using the Smith predictor. The proposed WSP algorithm was verified using experiments with a hardware-in-the-loop simulation system including the hardware of the pneumatic brake system.     

全球安全系统市场远景(二)

行人保护系统产品提供：发动机罩提升,主动安全保险杠概念,行人安全气囊由汽车零部件供应商与汽车制造商联合研发的一个伟大的发明,正逐步进入行人保护系统的领域。目前研发主要针对重新设计的汽车,以最大限度地减少在碰撞车祸时行人     

Restructuring of the economy and its impacts on the Korean maritime industry

The Korean government has made many efforts to repair the damage done by the financial crisis since November 1997. The restructuring programmes for the Korean economy, including chaebols' (i.e. family-controlled conglomerates) restructuring, have impacted in many ways on the shipping, shipbuilding and port sectors. This is because major shipping lines, shipyards, and recent privatization and operation of container terminals have closely been related to chaebols. This paper is concerned with the impacts of the Korean financial crisis on the shipping, shipbuilding, and port sector, with restructuring of the economy and chaebols.     

Computational investigation of cavitation on a semi-spade rudder

This article examines noncavitating and cavitating flow fields around a semi-spade rudder in the ship wake and propeller slipstream based on a computational method. The article seeks to explain the erosion that can occur around the gap due to cavitation; such erosion has been reported to occur while a ship is at sea. Another area of research is the effect of the gap size and shape. The effects of erosion-evading devices such as elongated gap edges, an increased edge radius, flow control projections, and vertical and horizontal guide plates were also studied.     

Comparison analysis for subjective and objective weights of financial positions of container shipping companies

This paper explores the positions of financial ratios identified utilizing both subjective and objective weighting methods—the consistent fuzzy preference relation (CFPR) and entropy—based on questionnaires collected from experts and the financial statements of major shipping companies in Taiwan and Korea. The comparison of perceptions of financial ratios by country and by expert group illuminates some financial aspects that experts may have ignored or not paid close attention to during the business operating process, especially in today’s turbulent world shipping market. The major results of this paper show that experts in the two countries have different perceptions of the debt-to-equity ratio and that by combining the results of objective and subjective weights, categorization of financial ratios by quadrant can help decision-makers find business options and strategies to improve the financial performance of their companies. This research approach may be applied to other business entities, improving on the direct rating method used in previous studies.     

Drivers' route choice and learning mechanism under bounded information environment

In this paper, we propose the theory of Rational Beliefs as the model of expectations that extends the theory of rational expectations to the postulated environments. Under the rational beliefs paradigm, drivers do not have structural knowledge of traffic conditions and they choose their routes based only on personal experiences and decision‐making rules. We found that if drivers have different decision‐making rules and experiences, then they form different beliefs of traffic conditions (e.g. average travel time) even though they have the same public information and use the same routes. Under the rational beliefs model, drivers are not motivated to renew their beliefs because the beliefs are compatible with their experiences. Therefore, the heterogeneity of beliefs does not disappear even though they have long‐term learning. In order to investigate how drivers form their beliefs of traffic conditions under bounded information environments, numerical experiment is carried out.