Properties of roadway particles from interaction between the tire and road pavement

A large fraction of urban PM₁₀ concentrations is due to non-exhaust traffic emissions, including road dust, particles from tire/road interface, and brake lining particles. Although potential health and environmental impacts associated with tire wear debris have increased, few environmentally and biologically relevant studies of actual tire wear debris have been conducted. Tire wear particles (TWP) are released from the tire tread as a result of the interaction between the tire and the pavement. Roadway particles (RP), meanwhile, are particles on roads composed of a mixture of elements from tires, pavement, fuels, brakes, environmental dust, and the atmosphere. The main objective of the present study is to identify the contribution of tires to the generation of RP and to assess the potential environmental and health impacts of this contribution. First, a mobile measurement system was constructed and used to measure the RP on asphalt roads according to vehicle speed. The equipment of the mobile system provides PM₁₀ concentration by DustTrak DRX, and mass and number size distribution of fine and ultrafine particles by a fast mobility particle sizer (FMPS) and an aerosol particle sizer (APS). The dependence of RP mass and particle number concentration on vehicle speed was observed. It was also found that many particles were generated by rapid deceleration of the vehicle.     

Comparison of driving characteristics between drivers in Korea and in the united states of America based on driver-vehicle interaction field database

Research and development involving intelligent vehicles of today is geared to safe, driver-friendly and sensitive vehicles that provide a driver with a pleasant and convenient driving environment while preventing him or her from possible risks of accident. In developing convenient and safe vehicles, research on drivers’ driving patterns, reactions and state characteristics depending on road conditions in actual field is essential in order to devise more driver-friendly intelligent vehicles. This paper describes how a driver-vehicle interaction (DVI) field database is built in order to obtain a driver’s input in normal road driving condition on highways, country roads, and city roads, and his or her state information, as well as data on the vehicle and traffic conditions. And the newly built database is compared with the RDCW FOT database established by UMTRI of the US for analysis to suggest that the driving tendencies of drivers in Korea and the road driving conditions are not the same as those in the US, reconfirming the need to establish a DVI field database, which will be used for the development of intelligent vehicles suitable for the Korean environment. The DVI data collected from actual driving in field are anticipated to be widely utilized as basic data for research on various intelligent driving safety systems, advanced driver assistance systems (ADAS) and human-vehicle interface (HVI) that are suitable for the driving environment in Korea.     

Objective evaluation of human perception of automotive sound based on physiological signal of human brain

This paper presents a novel approach to apply the physiological signal of the human brain to the sound quality evaluation of automotive sound. In the previous work, psychoacoustic metrics were applied to the sound quality evaluation of automotive sound. Loudness among psychoacoustic metrics is used for one of major sound metrics for the objective evaluation of the sound quality of the acceleration sound inside a car. Subjective evaluation of the sound quality of the acceleration sound shows different results depending on the two different groups of participants. One group liked powerful sound when a car is accelerated: the other group liked the refine sound. Loudness of the acceleration sound is not correlated with the subjective rating of the former group whilst it is correlated with that of the latter group. This evaluation suggests that for the people who like the powerful acceleration sound, it needs to find the sound metric for the objective evaluation of the sound quality of the acceleration sound. In this paper, a driver’s brain signal is measured using electroencephalography (EEG) when a driver hears the acceleration sound of passenger cars. The signal is analyzed to obtain the relationship between brain signals and human perception. According to these results, the alpha wave correlates to the human perception of powerful sound quality of passenger cars. This interesting relationship can be used for objective evaluation of passenger car sounds.     

Free piston engine generator: Technology review and an experimental evaluation with hydrogen fuel

Free piston engine generators which utilize a free piston engine and a linear generator are under investigation by a number of research groups around the world. Free piston engines give power output in a more efficient way when compared to conventional crankshaft engines, because the former do not have a crank mechanism which brings about additional mechanical loss. However, for the reliable and stable operation of the free piston engine generators, it is required to have a viable control system to address the uncertainty of piston motion. In this paper, most of the successful free piston engine generator developments were reviewed and a recent experimental result on a prototype free piston system was also presented with regard to engine performance with different mixture preparation strategies.     

Mesh generation and hysteretic loss prediction of 3-D periodic patterned tire

This paper is concerned with the numerical prediction of the hysteretic loss-induced rolling resistance of 3-D periodic patterned tire. Elastomeric rubber compounds of rolling tire exhibit the hysteretic loss owing to the phase difference between stress- and strain-time responses. By virtue of this physical characteristic, the rolling resistance is considered as a pseudo-force resisting the tire rolling. The 3-D periodic patterned tire model is constructed by copying an 1-sector mesh in the circumferential direction, and strain cycles of each strain component are approximated by 3-D static tire contact analysis. According to the principal value of half strain amplitudes, the hysteretic loss is calculated in terms of the amplitude of the maximum principal strain and the loss modulus of rubber compound. The numerical results of 3-D periodic patterned tire are justified with the experimental data and compared with those of 3-D smooth tire.     

Examination of nanoparticles from gasoline direct-injection (GDI) engines using transmission electron microscopy (TEM)

Gasoline direct-injection (GDI) engines have been reported to produce significantly more particulate matter (PM) mass and particulate number (PN) emissions than do port-fuel-injection (PFI) spark ignition engines. Because smallsized particles are of great concern in terms of their regulation, transmission electron microscopy (TEM) was used to evaluate the sizes of primary and aggregate particles that were thermophoretically collected from three different GDI engines under various engine operating conditions. A low load and retarded fuel injection generally reduced the particle size. Consequently, when the fuel injection timing was delayed at low loads, primary and aggregate particles became extremely small. In particular, a number of nanoparticles were sub-23-nm particles. Careful high-resolution TEM (HRTEM) analyses provided the first evidence that these nanoparticles are solid carbon particles with clear fringe patterns and young soot (and/or highly condensed semi-volatiles) with amorphous carbon patterns. Therefore, this result suggests that the current cut-off size at 23 nm for PN regulation in Euro 6 must be further reduced to include sub-23-nm carbon nanoparticles.     

Network performance analysis and manuever model for overtaking assistant service using wave

We present network requirements for an overtaking assistant service using wireless access in vehicular environment (WAVE). Currently, DNPW has been proposed as a representative overtaking assistant service with vehicle-tovehicle (V2V) communication. In order to analyze its network performance, we construct a maneuver model for an overtaking system. According to this model, we configured a scenario for network simulation based on the 802.11p WAVE standard. The results confirm that a radio range for overtaking needs only a single hop without routing methods. Moreover, we propose an additional safe distance for the communication delay generated by an increase in the numbers of neighboring vehicles. And for high priority activity of safety services, we present a proper access category (AC) of enhanced distributed channel access (EDCA). These analysis results should be tested considered in real safety service systems that use V2V communication.     

Investigation of the effectiveness of tandem oil fences under currents

The behavior of the flow passing a tandem oil fence, and the performance of the fence, were investigated by experimental and numerical methods. The flow characteristics between tandem fences were measured by the particle image velocimetry (PIV) method for the rigid and open free surface between the two fences in order to gather reference data for numerical investigations. A method of assessing a tandem fence by tracing the movement of an oil droplet around the fence is introduced. The effect of the current speed, the separation distance between the two fences, the relative draft of the two fences, and the water depth on the oil containment between the fences was investigated.     

H8 Control Performance of a Full-Vehicle Suspension Featuring Magnetorheological Dampers

Summary This paper presents an investigation of the feedback control performance of a full-vehicle suspension system featuring magnetorheological (MR) dampers. A cylindrical MR damper is designed and manufactured by incorporating a Bingham model of aMR fluid which is commercially available. After evaluating the field-dependent damping characteristics of the MR damper, a full-vehicle suspension system installed with 4 independent MR dampers is constructed and its governing equations of motion which include vertical, pitch and roll motions are derived. A H 8 controller which has inherent robustness against system uncertainties is formulated by treating the sprung mass of the vehicle as uncertain parameter. This is accomplished by adopting the loop shaping design procedure. For the demonstration of a practical feasibility, control performance characteristics for vibration suppression of the proposed MR suspension system are evaluated under various road conditions through the hardware-in-the-loop simulation (HILS) methodology.     

An empirical investigation on the dynamic processes of activity scheduling and trip chaining

Investigation of the dynamic processes of activity scheduling and trip chaining has been an interest of transportation researchers over the past decade because of its relevance to the effectiveness of congestion management and intelligent transportation systems. To empirically examine the processes, a computerized survey instrument is developed to collect household activity scheduling data. The instrument is unique in that it records the evolution of activity schedules from intentions to final outcomes for a weekly period. This paper summarizes the investigation on the dynamic processes of activity scheduling and trip chaining based on data collected from a pilot study of the instrument. With the data, ordered logit models are applied to identify factors that are pertinent to the scheduling horizon of activities. Results of the empirical analysis show that a daily schedule often starts with certain activities occupying a portion of the schedule and other activities are then arranged around these pre-occupants. Activities of shorter duration are more likely to be opportunistically inserted in a schedule already anchored by their longer duration counterparts. Persons with children often expect more constraining activities than those with no children. The analysis also shows that female respondents tend to be more structured in terms of how the week is planned. Additionally, analysis of travel patterns reveals that many trip-chains are formed opportunistically. Travel time required to reach an activity is positively related to the scheduling horizon for the activity, with more distant stops being planned earlier than closer locations.