Vibration reduction of H/Shaft using an electromagnetic damper with mode change

The objective of this study is to develop a damper that can reduce the amplitude of vibration in various frequency ranges. Previous H/Shaft vibration reduction methods work in a passive way. A dynamic damper reduces the amplitude of vibration at its first mode, but vibration still appears at the second mode. A mass damper or hollow shaft can shift the natural frequency to a lower or higher region. The fixed operating frequency prevents vibration from being reduced outside the operating frequency range. The proposed damper uses electromagnets as either masses or actuators to change the damper mode between dynamic damper mode and mass damper mode. The electromagnetic damper (EMD) can change its mode to respond to the vibration excitation at both low and high frequencies. The vibration reduction performance was evaluated by FRF tests in laboratory and vehicle conditions. The results were compared with those of a dynamic damper and indicate that the amplitude of vibration is reduced by 95.6 % when the EMD is implemented on an H/Shaft, whereas only 61.9 % vibration reduction is achieved by the dynamic damper.     

An analysis of destination choice for opaque airline products using multidimensional binary logit models

We investigate how customers respond to an opaque airline product offered by a European carrier. In this opaque product design, customers are randomly assigned to travel to one of approximately ten destinations; however, for a fee they may exclude one or more destinations from the choice set (or a particular package design) prior to learning which destination they will travel to. We use a multidimensional binary logit model to predict the probability that one or more alternatives will be chosen by a customer. Results show that customers are more likely to pay to exclude destinations located close to the origin airport and destinations that speak the same language as the origin airport. Length of stay, cost of living at the destination, and measures of destination attractiveness are also found to be significant predictors for some package designs. Based on these findings, we offer general recommendations for how to design opaque packages for airline customers.     

An advanced risk analysis approach for container port safety evaluation

Risk analysis in seaports plays an increasingly important role in ensuring port operation reliability, maritime transportation safety and supply chain distribution resilience. However, the task is not straightforward given the challenges, including that port safety is affected by multiple factors related to design, installation, operation and maintenance and that traditional risk assessment methods such as quantitative risk analysis cannot sufficiently address uncertainty in failure data. This paper develops an advanced Failure Mode and Effects Analysis (FMEA) approach through incorporating Fuzzy Rule-Based Bayesian Networks (FRBN) to evaluate the criticality of the hazardous events (HEs) in a container terminal. The rational use of the Degrees of Belief (DoB) in a fuzzy rule base (FRB) facilitates the implementation of the new method in Container Terminal Risk Evaluation (CTRE) in practice. Compared to conventional FMEA methods, the new approach integrates FRB and BN in a complementary manner, in which the former provides a realistic and flexible way to describe input failure information while the latter allows easy updating of risk estimation results and facilitates real-time safety evaluation and dynamic risk-based decision support in container terminals. The proposed approach can also be tailored for wider application in other engineering and management systems, especially when instant risk ranking is required by the stakeholders to measure, predict and improve their system safety and reliability performance.     

A new efficient EDI system for container cargo logistics

There have been many efforts to develop a logistics information system in the Korean logistics industry. In spite of these efforts, there are many points which need improvement in the Logistics Information System, of which function is the electronic data communication without added value. This paper aims to describe some of the main problems and the successful factors which are being found in the evolution of the present EDI systems for clearing import/export container cargoes, with special reference to Singapore, Korea, and Japan. Following this, leaving legal issues aside, to suggest workable guidelines for designing a new efficient EDI system for container cargo logistics. As a result of the review, the following successful factors are drawn: (a) the planning, requirement analysis and design of EDI are critical, as it provides a framework for its implementation; (b) as the data of customs clearance are an integral part of a logistics EDI system, the inclusion of customs in the system design is essential; (c) the sharing system of cargo data as the framework of the logistics EDI is efficient for data interchange; (d) the EDI software for the user has been developed and provided by an EDI network operating company; and (e) to facilitate communication between trading partners and the transport sector, it is necessary to adopt a global message standard, such as EDIFACT.     

Port privatization under Cournot vs. Bertrand competition: a third-market approach

By incorporating port competition into a third-market model consisting of two exporting firms and one importing country, we demonstrate the endogenous choice of port structures (i.e. privatization or public ownership) under either Bertrand or Cournot competition. In contrast to previous studies on port competition, we analyze the port strategy in view of all trading countries (i.e. importing country and exporting countries). We find that regardless of transport cost, the port ownership strategy alters according to exporting firm’s competition mode. Under Bertrand competition, the choice of port ownership structure depends on the degree of imperfect substitutability. However, under Cournot competition, all trading countries choose same ownership structures of each port. By comparing equilibrium of each competition mode, we show that welfare of exporting country under Cournot competition is higher than under Bertrand competition if goods are sufficiently substitutes. In contrast, importing country prefers Bertrand competition to Cournot competition when the competitive pressure is sufficiently high.     

Optimum design of tilting bogie frame in consideration of fatigue strength and weight

This paper addresses the use of finite-element (FE) analysis to calculate the fatigue strength of a bogie frame, for the development of tilting trains in Korea. A multi-body dynamic analysis was performed to extract the load condition by tilting on curves. Using the results of the multi-body dynamic analysis and the load scenario setout in the UIC standard, FE analysis was performed to obtain the stress distribution and to calculate the fatigue strength. An attempt was made to minimize the weight of the bogie frame using a back-propagation artificial neural network (ANN). The results of this study reveal that the stresses at some nodes are near the fatigue limit in the Goodman diagram and by using back-propagation ANN, the weight of the bogie frame could be reduced by 4.7%.     

Digital exchange of design models between marine equipment libraries using hybrid neutral formats

The selection of marine equipment is a time-consuming process for a ship outfitting designer. The inefficiency originates from the paper-based exchange of design information between shipyards and equipment manufacturers. We propose a method to exchange equipment models for electronic commerce. Shipyard practices were investigated to find out how the outfitting CAD library is being used. We also surveyed international standards for the exchange of digital equipment models, and analyzed the macroparametric methodology. We propose a hybrid method to represent the geometric information using STEP AP203 or the macroparametric method. The nongeometric information is defined according to the Parts Library (PLIB) standard. We implement a pilot system and test it with a ship design data set. The equipment model proposed can be used in the design process with heterogeneous shipbuilding CAD systems. The equipment model can improve the design and purchase process in shipyards.     

PIV velocity field measurements of flow around a KRISO 3600TEU container ship model

The main purpose of this investigation was to demonstrate a useful application of the particle image velocimetry (PIV) method to analyze the complex flow characteristics around a ship. For a sample illustration, the KRISO 3600TEU container ship model was chosen. The flow structure in the stern and near-wake region of the model has been investigated experimentally in a circulating water channel. Instantaneous velocity fields measured by the PIV velocity field measurement technique have been ensemble-averaged to give details of flow structures such as the spatial distributions of the local mean velocity, vorticity, and turbulent kinetic energy. The free-stream velocity was fixed at U _o = 0.6m/s, and the corresponding Reynolds number based on the length between perpendiculars was about 9.0 × 10⁵. The container ship model shows a complicated three-dimensional flow structure in the stern and near-wake regions. The PIV results clearly revealed the formation of large-scale bilge vortices in the stern region and their effect on the flow in the near-wake. The results shown here provide valuable information for hull form design and the validation of viscous ship flow codes and of turbulence models.     

A new hybrid terrain coverage method for underwater robotic exploration

It is well known that it is difficult to explore underwater terrains using an autonomous underwater vehicle due to the varieties and complexities of underwater terrain elements. Since conventional underwater terrain coverage techniques are usually based on the assumption that the underwater surface is planar, they generate an unnecessary exploration path especially on steep sloped surfaces of ocean basins. This paper proposes a new type of coverage technique, the hybrid terrain coverage framework (HTCF), which considers various surface conditions in three-dimensional environments and generates an efficient exploration path for all environments. The HTCF incorporates a planar terrain coverage algorithm, a spiral path terrain coverage algorithm, and a hybrid decision module to recognize and select the most suitable technique depending on the sloped surface variations. Simulation results show that the proposed HTCF is more efficient than the conventional terrain coverage algorithm in terms of the energy consumption of the underwater vehicle.     

A game-theoretic analysis of competition among container port hubs: the case of Busan and Shanghai 1

Countries throughout the world, and especially within Asia, are investing heavily in container port infrastructure in the hopes of capturing a larger share of global shipping activity for their economies. Many existing ports are emphasizing developing the capacity to serve as a hub port, building deepwater berths with large terminals to facilitate transfer of containers from feeder ships to mother ships for intercontinental transport. We develop a game-theoretic best response framework for understanding how competitor ports will respond to development at a focus port, and whether the focus port will be able to capture or defend market share by building additional capacity. We apply this model to investment and competition currently occurring between the ports of Busan and Shanghai.