Experimental study on reflection coefficient of curved perforated plate

A set of experiments is carried out in a towing tank to study the effects of the curvature of perforated plates on the wave reflection coefficient (C _r ). The curvature of a perforated plate can be changed by rotating a reference perforated plate aboutits origin according to the parabolic equation y=?x ². A plunger-type wave maker is used to generate regular waves. The reflection coefficients are calculated using Goda and Suzuki’s (1976) method. The results are compared with those of vertical or sloped passive wave absorbers. The comparison shows that a perforated plate with a curved profile is highly efficient in terms of reducing the wave reflection coefficient. A correlation is established to estimate the reflection coefficient of curved perforated plates as a function of both flow and geometry characteristics.     

Quasi steady-state aerodynamic model development for race vehicle simulations

Presented in this paper is a procedure to develop a high fidelity quasi steady-state aerodynamic model for use in race car vehicle dynamic simulations. Developed to fit quasi steady-state wind tunnel data, the aerodynamic model is regressed against three independent variables: front ground clearance, rear ride height, and yaw angle. An initial dual range model is presented and then further refined to reduce the model complexity while maintaining a high level of predictive accuracy. The model complexity reduction decreases the required amount of wind tunnel data thereby reducing wind tunnel testing time and cost. The quasi steady-state aerodynamic model for the pitch moment degree of freedom is systematically developed in this paper. This same procedure can be extended to the other five aerodynamic degrees of freedom to develop a complete six degree of freedom quasi steady-state aerodynamic model for any vehicle.     

Automobile aerodynamics influenced by airfoil-shaped rear wing

Computational model is developed to analyze aerodynamic loads and flow characteristics for an automobile, when the rear wing is placed above the trunk of the vehicle. The focus is on effects of the rear wing height that is investigated in four different positions. The relative wind incidence angle of the rear wing is equal in all configurations. Hence, the discrepancies in the results are only due to an influence of the rear wing position. Computations are performed by using the Reynolds-averaged Navier-Stokes equations along with the standard k-ε turbulence model and standard wall functions assuming the steady viscous fluid flow. While the lift force is positive (upforce) for the automobile without the rear wing, negative lift force (downforce) is obtained for all configurations with the rear wing in place. At the same time, the rear wing increases the automobile drag that is not favorable with respect to the automobile fuel consumption. However, this drawback is not that significant, as the rear wing considerably benefits the automobile traction and stability. An optimal automobile downforce-to-drag ratio is obtained for the rear wing placed at 39 % of the height between the upper surface of the automobile trunk and the automobile roof. Two characteristic large vortices develop in the automobile wake in configuration without the rear wing. They vanish with the rear wing placed close to the trunk, while they gradually restore with an increase in the wing mounting height.     

Extending stated choice analysis to recognise agent-specific attribute endogeneity in bilateral group negotiation and choice: a think piece

This paper is a think piece on variations in the structure of stated preference studies when modelling the joint preferences of interacting agents who have the power to influence the attribute levels on offer. The approach proposed is an extension of standard stated choice methods, known as ‘stated endogenous attribute level’ (SEAL) analysis. It allows for interactive agents to adjust attribute levels off a base stated choice specification that are within their control, in an effort to reach agreement in an experimental setting. This accomplishes three goals: (1) the ability to place respondents in an environment that more closely matches interactive settings in which some attribute levels are endogenous to a specific agent, should the modeller wish to capture such behaviour; (2) the improved ability of the modeller to capture the behaviour in such settings, including a greater wealth of information on the related interaction processes, rather than simply outcomes; and (3) the expansion of the set of situations that the modeller can investigate using experimental data.

The public administrator: Regulating for maritime transport efficiency

One role often fulfilled by public administrators is to regulate private enterprise in the public interest. The academic literature has not developed this area fully because public administration is not always tasked with this function. Nevertheless, when regulation forms a part of the responsibilities of the public administrator, it is among the most important. An essential foundation for effective regulation is a complete understanding of the implications and impact of regulatory action. In the absence of regulation, entrepreneurial awareness is applied in the private sector exclusively to satisfying consumer wants. In a regulated market, the entrepreneur’s focus is shifted toward regulatory imperatives. Regulation offers non-market opportunities for entrepreneurial innovation, as well as imposing new market constraints. This paper examines regulation of the maritime industry by the US federal government as an example.     

The economics behind the awarding of terminals in seaports: Towards a research agenda

Terminal concessions in seaports have only recently gained interest in academic circles. Issues such as the allocation mechanisms (to be) used for granting those concessions, the determination of the concession term and concession fees, as well as the inclusion of special clauses aimed at assuring that the terminal operator will act in the interest of the port authority and the wider community, are increasingly relevant to both academics and the port industry. So far, insights from established economic theories have rarely been applied to terminal concessions in seaports. It, therefore, remains to be seen which kind of awarding procedure would be best for which type of terminal concession. This contribution provides a detailed overview of the different phases of the terminal awarding process, including a classification scheme for awarding procedures, and contains an extensive discussion on the economic issues that require further investigation. The paper concludes by proposing a comprehensive research agenda on the topic.     

Comparing operator and users costs of light rail, heavy rail and bus rapid transit over a radial public transport network

A model to compare three alternative forms of public transport - light rail, heavy rail and bus rapid transit - is developed for an urban network with radial lines emanating from the borders to the city centre. The theoretical framework assumes an operation aimed at minimising the total cost associated with public transport service provision, which encompasses both operator and users costs. The decision variables are the number of lines (network density) and the frequency per period for each mode. This approach has no prejudices a priori in respect of whether a specified delivery scenario is aligned with existing modal reputation. Rather, we establish the conditions under which a specific transit mode should be preferred to another in terms of the operator (supply) and user (demand) side offerings. The model is applied using data from Australian cities, suggesting that in most of the scenarios analysed a high standard bus service is the most cost-effective mode, because it provides lower operator costs (infrastructure, rolling stock and operating cost), access time costs (due to a larger number of lines) and waiting time cost (due to larger frequencies of operation). A rail mode, such as light rail or heavy rail, may have a lower total cost only if it is able to run faster than bus rapid transit, and the difference in speed is enough to outweigh the bus advantage on operator cost and access and waiting times.     

Creating bus timetables with maximal synchronization

This paper addresses the problem of generating a timetable for a given network of buses so as to maximize their synchronization. It attempts to maximize the number of simultaneous bus arrivals at the connection (transfer) nodes of the network. Transit schedulers, taking into account the satisfaction and convenience of the system's users, appreciate the importance of creating a timetable with maximal synchronization, which enables the transfer of passengers from one route to another with minimum waiting time at the transfer nodes. In this paper, the problem is formulated as a mixed integer linear programming problem, and a heuristic algorithm is developed to solve the problem in polynomial time. The efficiency of this algorithm, compared to optimal solutions, is illustrated through a series of examples.     

20世纪美国应对机动性的交通构想及高速公路发展历程

为了阐述20世纪除汽车机动性外,交通发展经历的最重要的进程——城市高速公路的出现,考察了过去100年来美国城市交通规划的历史。通过回顾各种研究资料,认为资助州际公路发展所采用的方法使联邦和州公路工程师成为主管,这影响了公路的选线及设计。联邦公路工程师只关注机动车通过效率的最大化,而在很大程度上忽略了城市的其他利害关系。没有先进的规划理念指导、过度建设、稀疏、放射环状的道路网对于加强机动性取得了极大的效益,但通常要为此付出巨大的社会和环境成本。最后指出,在实践中要重新审视具有百年历史的协调交通与土地利用规划的观点,而且,公共财政权宜之计式的政治决策方式将对工程、出行和城市形态产生深远的影响。·     

Approximations to the magic formula

Pacejka’s tire model is widely used and well-known by the automotive engineering community. The magic formula describes the brake force, side force and self-aligning torque in terms of the longitudinal slip and slip angle, plus several corrections. This paper uses approximation theory to obtain different types of approximations to the magic formula: rational functions (RA) resulting from the Remez algorithm, expansions in a series of Chebyshev polynomials (ACh), a series of Chebyshev rational polynomials (ARChPs), a series of rational orthogonal functions (ORF) and a series of ARChPs that result from grade-1 ORFs. The last expansion shows the fastest convergence and most effective computation. Jacobi rational polynomials can also be obtained to complement this expansion and facilitate fine-tuning in specific areas of the error curve. This work is complemented by obtaining the original rational approximations to the inverse tangent function, which take advantage of the curve symmetry to reduce the computation load and provide models that include the influence of the vertical load. The convergence properties of the development in series and the error values resulting from numeric examples for the three types of stress are shown. The proposed final ARChP expressions show very low error (1%) compared to the original magic formula. They can be computed 20 times faster; they can be evaluated, derived and integrated analytically easily; and their coefficients can be obtained from tests using common least-squares algorithms.