后桥钢板激光-MIG复合焊接优化研究

研究了两种后桥桥壳用低合金钢板在激光-MIG复合焊接中,接头形状、接头间隙及MIG参数变化(大、中、小MIG参数)对焊缝形状及焊缝喉厚的影响.研究结果表明,MIG参数应设置成大、中MIG参数水平,以保证在一定的接头间隙下有充足的焊接材料填入间隙而形成部分焊透的焊缝,使焊缝喉厚满足焊接强度要求;过高的MIG输入能量和过多的焊料(丝)填入将导致焊缝横截面积增大,但对焊缝喉厚的影响不是很明显;当MIG参数设置成小MIG参数水平时,0.5 mm的接头间隙或切角面为3 mm×2 mm时,对获得较大的焊缝喉厚有利.     

Measurement of ocean temperatures using instruments carried by Antarctic fur seals

The study aimed to test the utility of instruments deployed on marine mammals for measuring physical oceanographic variation and, using this method, to examine temperature variation in the coastal waters around South Georgia. There was a significant correlation between temperature measurements made using a towed undulating oceanographic recorder (UOR) and concurrent measurements from time-depth recorders (TDRs) fitted to lactating Antarctic fur seals foraging from the coast of South Georgia. Congruence was found at horizontal spatial scales from 0.01°×0.01° to 0.5°×0.5° (degrees of latitude and longitude), and at a vertical scale of 10 m. However, there was no significant correlation between temperature measured by TDRs in the top 5 m and sea surface temperature (SST) measured by satellite remote sensing. TDR data provided information about temperature variation vertically through the water column, and through time. The UOR data were used to recalibrate the TDR data in order to correct for the slow response time of the TDR thermistor relative to the speed of seal movements through the water column. Seasonal temperature variation was apparent, and temperatures also varied between regions, and with bathymetry. These results were consistent with the current interpretation of the coastal oceanography around South Georgia. In particular, the relationship between on- and off-shelf waters showed larger amounts of warmer surface water in a region in which more run-off was to be expected. The study also showed that Antarctic fur seals concentrate their activity in regions of colder, and presumably oceanic, water. Such instrumented animals could provide near real time data for assimilation into ocean models.     

Could you also have made this trip by another mode? An investigation of perceived travel possibilities of car and train travellers on the main travel corridors to the city of Amsterdam,The Netherlands

We investigated perceived travel possibilities (or subjective choice-sets, consideration-sets) of car and train travellers on the main corridors to the city of Amsterdam, The Netherlands, and associations with traveller and trip characteristics. We conducted secondary analysis on a survey sample consisting of 7950 train and 19,232 car travellers. Forty-five percent of train travellers had a car in their objective choice-set, 27% of them would however never use it for this trip. Trip destination city centre, trip purpose, paying for the trip, public transport commitment, traffic congestion and parking problems were associated with consideration of car as alternative. Forty-two percent of car travellers had public transport in their subjective choice-set. The ratio between perceived public transport and objective car travel time stood out as determinant of consideration-sets, next to destination city centre, trip purpose, travel time and private versus company car ownership. On average, car travellers’ perceptions of public transport travel time exceeded objective values by 46%. We estimated that if perceptions would be more accurate, two out of three car travellers that currently do not see public transport as an alternative would include it in their choice-set, and use it from time to time. This effect has strong theoretical and policy implications.     

Improving noise assessment at intersections by modeling traffic dynamics

Three families of road noise prediction models can be distinguished. Static noise models only consider free-flow constant-speed traffic with uniformly distributed vehicles. Analytic noise models assume that all vehicles are isolated from one another but account for their mean kinematic profile over the network. Micro-simulation noise models relax the hypothesis of no interaction between vehicles and fully capture traffic flow dynamic effects such as queue evolution. This study compares the noise levels obtained by these three methodologies at signalized intersections and roundabouts. It reveals that micro-simulation noise models outperform the other approaches. Particularly, they are able to capture the effects of stochastic transient queues in under-saturated conditions as well as stop-and-go behaviors in oversaturated regime. Accounting for traffic dynamics is also shown to improve predictions of noise variations due to different junction layouts. In this paper, a roundabout is found to induce a 2.5 dB(A) noise reduction compared to a signalized intersection in under-saturated conditions while the acoustic contributions of both kinds of junctions balance in oversaturated regime.     

Second-order hydrodynamic effects on an arrangement of two concentric truncated vertical cylinders

The second-order diffraction problem by a piston-like arrangement that consists of two concentric surface piercing cylinders is considered. The developed matched axisymmetric eigenfunction expansion solution methodology in cylindrical co-ordinates is based on the semi-analytical formulation of the velocity potentials in the various fluid regions which are defined by the geometry of the two-body arrangement. The main difficulty associated with the specific configuration originates from the fact that the geometry defines two fluid regions that extend up to the free surface in which the inhomogeneous second-order free surface boundary condition has to be fulfilled. To this end the associated velocity potentials in these regions are decomposed into a number of components defining the so-called ‘free’ and ‘locked’ waves. The latter are calculated by solving the resulting Sturm–Liouville problems. The seek second-order velocity potential in the whole fluid domain is then derived by enforcing matching conditions for the radial velocities and the fluid pressures at the cylindrical boundaries of adjacent fluid domains. Numerical results concerning the second-order hydrodynamic loading and the wave run-up on the cylinders are given, whereas special attention is given at incident wave frequency regions where the first-order exciting wave forces attain maximum values due to the resonant fluid motions in the moonpool.     

Sea level and Eddy Kinetic Energy variability in the Bay of Biscay, inferred from satellite altimeter data

Twelve years (1993–2005) of altimetric data, combining different missions (ERS-1/2, TOPEX/Poseidon, Jason-1 and Envisat), are used to analyse sea level and Eddy Kinetic Energy variability in the Bay of Biscay at different time-scales. A specific processing of coastal data has been applied, to remove erroneous artefacts. Likewise, an optimal interpolation has been used, to create a series of regional Sea Level Anomaly maps, merging data sets from two satellites.The sea level presents a trend of about 2.7 mm/year, which is within the averaged values of sea level rise in the global ocean. Frequency spectra show that the seasonal cycle is the main time-scale affecting the sea level and Eddy Kinetic Energy variability. The maximum sea level occurs in October, whilst the minimum is observed in April. The steric effect is the cause of this annual cycle. The Northern French shelf/slope presents intense variability which is likely due to internal tides. Some areas of the ocean basin are also characterised by intense variability, due to the presence of eddies.The Eddy Kinetic Energy, in turn, is higher from December to May, than during the rest of the year and presents a weak positive trend from April 1995 to April 2005. Several documented mesoscale events, occurring at the end of 1997 and during 1998, are analysed. Altimetry maps prove to be a useful tool to monitor swoddy-like eddies from their birth to their decay, as well as the inflow of seasonal slope water current into the southeastern corner of the Bay of Biscay.     

Distribution of plankton lipids and their role in the biological transformation of Antarctic primary production

Production and transfer of lipid through the Antarctic food web is reviewed for the Indian Ocean sector. The slow settling fine particles showed a marked inter-annual variability in biochemical composition with an increase in lipid content as % organic carbon. Comparison of the fatty acid spectra of different size categories of organic particles indicated that fine particles are dominated by saturated, monoenoic and branched acids, while larger material (50–100 μm, 200–500 μm net collected fractions) displayed a signature dominated by polyunsaturated acids. Zooplankton taxa displayed different strategies of lipid accumulation. Lipid content was highest in Thysanoessa macrura females and copepodite stages of Calanus propinquus. Relatively low levels were recorded for juveniles and male stages of euphausiids. Reserve lipids varied with species: C. propinquus showed equal content of triglycerides and wax esters, T. macrura showed a dominance of wax esters and Euphausia superba and Themisto gaudichaudii accumulated only triglycerides. Computed as carbon equivalent and integrated over 200 m, lipids in slow settling particles represented 22.6% of annual primary production. Similar computation with mesozooplankton and E. superba data on biomass and population structure from several summer cruises indicated values of carbon accumulation as lipid reserves and egg production of 4.2 and 0.1% of annual primary production for copepods and 4.4 and 3.8% for E. superba. When all trophic levels are considered, the overall mean exceeded 30% of annual primary production.     

Intercity rail services: A nested logit stated choice analysis of pricing options

There is a renewed interest in intercity and long-distance rail services in many countries, with both new high-speed rail services and improvements to conventional rail under review. The current study reports on an investigation using a stated choice experiment, of the demand for sleeper services between Sydney, Northern New South Wales (NSW) and Brisbane in Australia, a 12 to 14 hour trip, just after a decision by the NSW government to temporarily suspend sleeper services and introduce seating service only, pending an inquiry into the demand for such loss-making services under alternative price and service levels. A matrix of direct fare elasticities within the rail mode and between rail and competing modes are obtained for concession and non-concession travellers from a nested logit model. The empirical evidence extends our knowledge of the sensitivity of the long distance passenger market to a range of rails fares, distinguishing between classes of fares and levels of service.     

焊轨机的发展前景

本文介绍了能够解决现代钢轨,包括电炉钢钢轨,在使用线路焊轨机进行焊接工作时发生焊接问题的新工艺、新技术和新装备。     

An aggregate demand model for intercity passenger travel in Sri Lanka

Inspite of the inherent weaknesses in aggregate demand models, they continue to be used in everyday applications, especially in developing countries. The largely data intensive disaggregate model preclude its application in many cases. This paper attempts the formulation and calibration of an aggregate total demand model for estimating inter-district passenger travel by public transport in Sri Lanka. In its process, an investigation is made of the common problems in the aggregate approach while examining possible remedial measures to improve the accuracy and (hence) the usability of the aggregate model. It is argued that commonly used variables and functional forms are inappropriate for making accurate estimates in developing countries. Consequently, the model calibration is shown to incorporate variables representing urbanisation, under-development, transfers, a mode-abstract cost function and intrinsic features. The necessity for functional form for each variable to be based on behavioral assumptions that are tested using the Box-Cox transformation for ensuring the best fit of the data is also observed. Although, the model form was calibrated for Sri Lanka, the model is generalised in order for its applications to other countries as well as, both, inter-district and intercity travel demand estimation.