Feedback brake distribution control for minimum pitch

The distribution of brake forces between front and rear axles of a vehicle is typically specified such that the same level of brake force coefficient is imposed at both front and rear wheels. This condition is known as ‘ideal’ distribution and it is required to deliver the maximum vehicle deceleration and minimum braking distance. For subcritical braking conditions, the deceleration demand may be delivered by different distributions between front and rear braking forces. In this research we show how to obtain the optimal distribution which minimises the pitch angle of a vehicle and hence enhances driver subjective feel during braking. A vehicle model including suspension geometry features is adopted. The problem of the minimum pitch brake distribution for a varying deceleration level demand is solved by means of a model predictive control (MPC) technique. To address the problem of the undesirable pitch rebound caused by a full-stop of the vehicle, a second controller is designed and implemented independently from the braking distribution in use. An extended Kalman filter is designed for state estimation and implemented in a high fidelity environment together with the MPC strategy. The proposed solution is compared with the reference ‘ideal’ distribution as well as another previous feed-forward solution.     

The influence of suspension components friction on race car vertical dynamics

This work analyses the effect of friction in suspension components on a race car vertical dynamics. It is a matter of fact that race cars aim at maximising their performance, focusing the attention mostly on aerodynamics and suspension tuning: suspension vertical and rolling stiffness and damping are parameters to be taken into account for an optimal setup. Furthermore, friction in suspension components must not be ignored. After a test session carried out with a F4 on a Four Poster rig, friction was detected on the front suspension. The real data gathered allow the validation of an analytical model with friction, confirming that its influence is relevant for low frequency values closed to the car pitch natural frequency. Finally, some setup proposals are presented to describe what should be done on actual race cars in order to correct vehicle behaviour when friction occurs.     

Application of the Principles of ICZM for Restoring the Goro Lagoon

The Goro lagoon has been adversely affected by intense anthropogenic impacts, which have resulted in deterioration of the lagoon's environmental health. An intervention at the lagoon's secondary mouth was done in order to improve the water exchange between the lagoon and the sea and to reclaim the lagoon's floor. This intervention comprised reprofiling the submerged sandspit platform and the tidal channel and nourishing the barrier island. After completion of the intervention, clam production increased by 28% and the lagoon's ecological quality substantially improved. The project utilized some of the eight principles of integrated coastal zone management to reach the best compromise between the socioeconomic needs and preservation of the lagoon. The realization of the successful intervention was first secured in a memorandum of agreement that was drafted by negotiations between the Emilia-Romagna Region Council, the Province of Ferrara, Goro Municipality, and the local fishermen's association. Two committees managed the intervention and ensured that all stakeholders participated in the decisionmaking process. The collaboration between public and private sectors enabled the forging of a cost-effective intersectoral intervention with a long-term perspective, which fulfilled the specific ecological needs of the lagoon and guaranteed sustainable development for the lagoon's adjacent human communities.     

Active yaw damper for the improvement of railway vehicle stability and curving performances: simulations and experimental results

To further increase passenger train comfort and handling performances, a mechatronic approach to the design of railway vehicles is necessary. In fact, active systems on board a railway vehicle allow to push design barriers beyond those encountered with just passive systems. The article deals with the development of an electro-mechanical actuator to improve the running behaviour of a railway vehicle, both in straight track and curve. The main components of the active system are a brushless motor and a mechanical transmission, used to apply a longitudinal force between the carbody and the bogie of the vehicle. The actuator is operated in force control. Different control strategies were developed for straight track running, where the aim is to increase the vehicle critical speed, and for curve negotiation, where the goal is to reduce the maximum values of track shift forces. A mathematical model of the railway vehicle incorporating the active control device has been developed and used to optimise control strategies and hardware set-up of the active device and to estimate the increase in operating performances with respect to a conventional passive vehicle. The active control device has then been mounted on an ETR470 railway vehicle, and its performances have been evaluated during in-line tests in both straight and curved tracks.     

A methodology for vehicle sideslip angle identification: comparison with experimental data

Sideslip angle could provide important information concerning vehicle's stability. Unfortunately direct measurement of sideslip angle requires a complex and expensive experimental set-up, which is not suitable for implementation on ordinary passenger cars; thus, this quantity has to be estimated starting from the measurements of vehicle lateral/longitudinal acceleration, speed, yaw rate and steer angle. According to the proposed methodology, sideslip angle is estimated as a weighted mean of the results provided by a kinematic formulation and those obtained through a state observer based on vehicle single-track model. Kinematical formula is considered reliable for a transient manoeuvre, while the state observer is used in nearly quasi-state condition. The basic idea of the work is to make use of the information provided by the kinematic formulation during a transient manoeuvre to update the single-track model parameters (tires cornering stiffnesses). A fuzzy-logic procedure was implemented to identify steady state or transient conditions.     

Nonlinear PI front and rear steering control in four wheel steering vehicles

Vehicle steering dynamics show resonances, which depend on the longitudinal speed, unstable equilibrium points and limited stability regions depending on the constant steering wheel angle, longitudinal speed and car parameters.

The main contribution of this paper is to show that a combined decentralized proportional active front steering control and proportional-integral active rear steering control from the yaw rate tracking error can assign the eigenvalues of the linearised single track steering dynamics, without lateral speed measurements, using a standard single track car model with nonlinear tire characteristics and a non-linear first-order reference model for the yaw rate dynamics driven by the driver steering wheel input. By choosing a suitable nonlinear reference model it is shown that the responses to driver step inputs tend to zero (or reduced) lateral speed for any value of longitudinal speed: in this case the resulting controlled vehicle static gain from driver input to yaw rate differs from the uncontrolled one at higher speed. The closed loop system shows the advantages of both active front and rear steering control: higher controllability, enlarged bandwidth for the yaw rate dynamics, suppressed resonances, new stable cornering manoeuvres, enlarged stability regions, reduced lateral speed and improved manoeuvrability; in addition comfort is improved since the phase lag between lateral acceleration and yaw rate is reduced.

For the designed control law a robustness analysis is presented with respect to system failures, driver step inputs and critical car parameters such as mass, moment of inertia and front and rear cornering stiffness coefficients. Several simulations are carried out on a higher order experimentally validated nonlinear dynamical model to confirm the analysis and to explore the robustness with respect to unmodelled dynamics.     

A non-Hertzian method for solving wheel–rail normal contact problem taking into account the effect of yaw

A novel approach is proposed in this paper to deal with non-Hertzian normal contact in wheel–rail interface, extending the widely used Kik–Piotrowski method. The new approach is able to consider the effect of the yaw angle of the wheelset against the rail on the shape of the contact patch and on pressure distribution. Furthermore, the method considers the variation of profile curvature across the contact patch, enhancing the correspondence to CONTACT for highly non-Hertzian contact conditions. The simulation results show that the proposed method can provide more accurate estimation than the original algorithm compared to Kalker’s CONTACT, and that the influence of yaw on the contact results is significant under certain circumstances.