Experimental study on a model azimuthing podded propulsor in ice

The objective of this study was to investigate the performance of a model azimuthing podded propulsor in ice-covered water. Model tests were carried out with two different depths of cut into the ice (15 and 35 mm), two different ice conditions (presawn and pack ice conditions), and four different azimuthing angles. The depth of cut is the maximum penetration depth of the propeller blade into the ice block. The 0.3-m-diameter model propeller was operated in a continuous ice milling condition. Ice loads were measured by several sensors which were installed in various positions on the model. Six one-axis pancake-style load cells on the top of the model measured the global loads and two six-component dynamometers were installed on the shaft to measure the shaft loads. One six-component dynamometer was attached to the one of the propeller blades inside the hub to measure the blade loads. The pod unit and propeller performance in ice are presented. Ice-related loads, which were obtained when the blade was inside the ice block, are introduced and discussed. During the propeller–ice interaction, a blade can experience the path generated by the previous blade, which is called the shadowing effect. The effects of shadowing, depth of cut, azimuthing angle, and advance coefficient on propulsor performance are presented and discussed.     

A new methodology for incident detection and characterization on surface streets

In this paper, a new methodology is presented for real-time detection and characterization of incidents on surface streets. The proposed automatic incident detection approach is capable of detecting incidents promptly as well as characterizing incidents in terms of time-varying lane-changing fractions and queue lengths in blocked lanes, lanes blocked due to incidents, and incident duration. The architecture of the proposed incident detection approach consists of three sequential procedures: (1) Symptom Identification for identification of incident symptoms, (2) Signal Processing for real-time prediction of incident-related lane traffic characteristics and (3) Pattern Recognition for incident recognition. Lane traffic counts and occupancy are the only two major types of input data, which can be readily collected from point detectors. The primary techniques utilized in this paper include: (1) a discrete-time, nonlinear, stochastic system with boundary constraints to predict real-time lane-changing fractions and queue lengths and (2) a pattern-recognition-based algorithm employing modified sequential probability ratio tests (MSPRT) to detect incidents. Off-line tests based on simulated as well as video-based real data were conducted to assess the performance of the proposed algorithm. The test results have indicated the feasibility of achieving real-time incident detection using the proposed methodology.     

Transport reviews prize

This paper reviews the provision of public transport in the Cape Town Metropolitan Area and the proposals for its future development. A vitally distinguishing characteristic of public transport in Cape Town and other South African cities is the fractured market with great discrepancies between different segments. These range from those with high incomes and preferences similar to those found in typically First World countries to a great majority living at or below minimum poverty levels with virtually no choices and a very different set of needs and preferences. Although scope for improving service levels and satisfying user needs is unlimited, in South Africa resources for transport are facing severe competition from other macrolevel social and economic imperatives, such as combating crime and addressing discrepancies in health and education needs. This situation represents a huge challenge to those responsible for planning and developing public transport strategies. Evidence is presented that current public transport services are unsustainable in terms of increasing subsidy requirements while also not effectively meeting user needs. Proposals to restructure the public transport system and to use Stated Preference techniques to identify user needs are put forward. Given the fractured market for public transport in metropolitan Cape Town, Stated Preference techniques will require innovative adaptations and different approaches to those most commonly applied elsewhere in the world and this paper provides some broad guidelines.     

The impact of dry port operations on container seaports competitiveness

The concepts of intermodal logistics and distribution networks have made integration of the inland freight distribution system essential for an efficient container seaport system. Inland components, such as dry ports, which exist within the seaport system, have become important in shaping the performance and competitive strategies of container seaports. Owing to the importance of interdependence between dry ports and container seaports, this paper aims to investigate the impact of dry port operations on container seaport competitiveness. It conducted an empirical study in Malaysia through 120 online surveys to key stakeholders of dry ports, including freight forwarders, shippers, seaports, rail operator, shipping lines, and haulers. The data collected were analysed using exploratory factor analysis (EFA). The results from EFA show that Malaysian dry port operations have impacts on seaport competitiveness. These include enhancing seaport performance, increasing service variations for seaports, improving seaport-hinterland proximity, increasing seaport trade volume, and enhancing seaport capacity.     

Seaport research: A structured literature review on methodological issues since the 1980s

This study aims to investigate how seaport research has been conducted from the methodological perspective. To this end, this study reviews published port literature for the last three decades (1980-2000s). The investigation primarily categorises the literature according to various methodological issues such as research paradigm, research strategy, base-disciplines, research methods and analysis techniques in order to provide meaningful implications on methodological evolution in seaport research for the period. This study suggests methodological bias in port research to a positivistic paradigm, following a quantitative trajectory moving from conceptual to empirical studies. In addition, the increased use of mathematical modelling and advanced statistical analysis methods is clearly observed. The introduction of advanced analytical tools used in other academic disciplines facilitates discussions in particular research area and amplifies the literature in those areas. This paper also suggests research gaps from the methodological perspective and implications for future port research.     

Decision support for risk assessment of mid-air collisions via population-based measures

Specifying proximity warning functions for aircraft in managed airspace has received considerable attention. However, similar functions for aircraft operating in unmanaged airspace have received comparatively little analysis despite the fact that these functions are stressed to a greater physical degree, and perhaps more frequently, than in managed airspace. The mid-air collision hazard and its associated risk are re-examined from both an historical and a systematic engineering modelling viewpoint. Historic measures of this transport risk in managed airspace have been based on fatalities normalized by flight hours or flight movements. However some of these data may not be available in unmanaged airspace. Another approach to measurement directs attention to populations at risk where several measures are now well known: collective risk, individual risk and the frequency of occurrence of the hazards that give rise to such risk. A decision support methodology is presented that relates both transport and population-based approaches. A cohesive and consistent set of aspired goals for various stakeholder groups can be set taking into account the different stakeholder needs. A case study is drawn from historic mid-air collision data to illustrate the process. A consistent basis for national-level policy decisions harmonised with proactive engineering design requirements is achieved. The strengths, limitations and implications of this approach for engineering design purposes are discussed.     

Introduction to the Theme Issue: The Role of Geography in Contemporary Coastal Management Policy and Practice

This article provides a brief introduction to the theme issue on “The role of geography in contemporary coastal management policy and practice.” The theme is addressed through a suite of seven articles that collectively consider how geographical understandings and methods relate to contemporary coastal policy and practice. The key theme to emerge from the articles is that geography forms an underlying framework for considering integrated coastal management, largely due to the integrative nature of geography itself.     

Intelligent transport systems solutions in transitional countries: The case of Korea

Transport policy in Korea is driven by the need to cope with ever-worsening traffic conditions. The development of an intelligent transport systems (ITS) Master Plan for Korea is of particular interest and demonstrates the heavy reliance placed on ITS measures to facilitate both the management of congested (but expanding) highway networks and to encourage a shift to greater use of public transport. The paper highlights the major achievements of ITS in Korea by assessing the evidence provided by the widespread implementation of ITS technologies (such as the creation of 'showcase' demonstrations). Some observations from the implementation of ITS in (so-called) transitional economies are presented.     

Schlieren,Shadowgraph, Mie-scattering visualization of diesel and gasoline sprays in high pressure/high temperature chamber under GDCI engine low load condition

Three visualization methods, Schlieren, Shadowgraph, and Mie-scattering, were applied to compare diesel and gasoline spray structures in a constant volume chamber. Fuels were injected into a high pressure/high temperature chamber under the same in-cylinder pressure and temperature conditions of low load in a GDCI (gasoline direct injection compression ignition) engine. Two injection pressures (40 MPa and 80 MPa), two ambient pressures (4.2 MPa and 1.7 MPa), and two ambient temperatures (908 K and 677 K) were use. The images from the different methods were overlapped to show liquid and vapor phases more clearly. Vapor developments of the two fuels were similar; however, different liquid developments were seen. At the same injection pressure and ambient temperature, gasoline liquid propagated more quickly and disappeared more rapidly than diesel liquid phase. At the low ambient temperature and pressure condition, gasoline and diesel sprays with higher injection pressures showed longer liquid lengths due to higher spray momentum. At the higher ambient temperature condition, the gasoline liquid length was shorter for the higher injection pressure. Higher volatility of gasoline is the main reason for this shorter liquid length under higher injection pressure and higher ambient temperature conditions. For a design of GDCI engine, it is necessary to understand the higher volatility of gasoline.