使用燃料电池的铁道车辆转向架驱动试验

在全球环保的号召下,世界各地对节约能源和降低环境负担的要求与日俱增.因此,使用以氢作为洁净、高效能源的燃料电池来驱动车辆正引起人们的关注.日本铁道技术综研所(RTRI)根据过去的研究成果,于2001年开始开发使用燃料电池的铁道车辆,并报道了用铁道车辆转向架进行驱动试验的结果.     

Material transport from the nearshore to the basinal environment in the southern Baltic Sea: I. Processes and mass estimates

Processes involved in erosion, transport and deposition of cohesive materials are studied in a transect from shallow (16 m) to deep (47 m) water of the SW Baltic Sea. The wave- and current-induced energy input to the seabed in shallow water is high with strong variability and suspended matter concentrations may double within a few hours. Primary settling fluxes (from sedimentation traps) are less than 10 g m⁻² day⁻¹, whereas resuspension fluxes (evaluated from sedimentation flux gradients) are 15–20 times higher and the residence time for suspended matter in the water column is 1–2 days. Settling velocities of aggregates are on average six times higher than for individual particles resulting in an enhanced downward transport of organic matter. Wave-induced resuspension (four to six times per month) takes place with higher shear stresses on the bottom than current-induced resuspension (three to five times per month). The short residence time in the water column and the frequent resuspension events provide a fast operating benthic–pelagic coupling. Due to the high-energy input, the shallow water areas are nondepositional on time scales longer than 1–2 weeks. The sediment is sand partly covered by a thin fluff layer during low-energy periods. The presence of the fluff layer keeps the resuspension threshold very low (<0.023 N m⁻²) throughout the year. Evaluated from 3-D sediment transport modeling, transport from shallow to deep water is episodic. The net main directions are towards the Arkona Basin (5.5×10⁵ t per year) and the Bornholm Basin (3.7×10⁵ t per year). Energy input to the bottom in deep water is low and takes place much less frequently. Wave-induced resuspension occurs on average once per month. Residence time of particles (based on radioactive isotopes) in the water column is half a year and the sediment accumulation rate is 2.2 mm year⁻¹ in the Arkona Basin.     

Accurate INS position solution during GPS outages or degraded GPS

Temporary degraded GPS (DGPS) position loss, in circumstances such as an overhead bridge, can be alleviated by an inertial navigation system (INS) that uses onboard sensors, such as yaw and speed sensors, to determine vehicle position. This paper introduces a post-processing DGPS/INS integration approach based on using the INS solution during DGPS outages or periods of low accuracy DGPS position solutions. In this approach, the INS solution initialization is performed using the DGPS solution before DGPS position solution loss, and measurements from the Inertial Measurement Unit (IMU). The final post-processed INS solution is a weighted average of the INS forward and backward solutions. This work constitutes two parts: the INS initialization methods for different degrees of freedom vehicle positioning models, and the developed weighting model necessary to combine the forward and the backward solutions. The former part is essential in obtaining acceptable INS initial states for both the stand-alone INS or any post-processing or real time INS/GPS integrated system. The latter part is based on the use of the complementary error behaviours of the backward and the forward solutions, and can be used as a survey method with acceptable position solutions accuracies. Applying the forward/backward INS combined solution method on real data shows that the resultant INS solution accuracy is 35 cm or less over a 1000 m road segment. This method is used to survey freeways interchange road segments where 50% of the surveyed distance has no DGPS solution or has a degraded DGPS solution. The average achieved accuracy over the whole freeways interchange is around 40 cm over a 23 km distance.     

The analysis of entropy models with equality and inequality constraints

Entropy models are emerging as valuable tools in the study of various social problems of spatial interaction. With the development of the modelling has come diversity. Increased flexibility in the model can be obtained by allowing certain constraints to be relaxed from equality to inequality. To provide a better understanding of these entropy models they are analysed by geometric programming. Dual mathematical programs and algorithms are obtained.     

An Internal State Variable Model for the Low Temperature Tempering of Low Alloy Steels

QuanitativelyaccuratePredictionsofquenchinduceddistOnionandresidualstressrelyontheabilitytopredictthemicrosthectUralevolUtionthroughOutthequenchProcess.InlowaIloysteels,cUrrenresearchMshavefOcusedontheformationldneticsoffetrite,pearlite,bainiteandmartensite.However,temPeringcanhavealargeinfluenceondistOnionandresidualstrCss,andeffortstoaccountforthislagbehindthemodelingofthePrimnyphasetransihons.AsafirststeptowardsaccountingfortemPerillg,wehavedevelOpedanintemalstatevariablemodelthatuses…     

Application of a thermodynamic model with a complex chemistry to a cycle resolved knock prediction on a spark ignition optical engine

A combination of experimental and numerical methodologies is proposed for the investigation of knocking in spark ignition engines to aid in better understanding the physical and chemical processes that occur and to exploit the capabilities of a developed computational tool. The latter consists of a thermo-fluid dynamics model, which is part of an advanced 1-D fluid dynamics code for the simulation of the entire engine, and a complex chemistry model, which can be embedded into the thermo-fluid dynamics model using the same integration algorithm for the conservation equations and the reacting species. Their mutual interaction in the energy balance will be considered. The experimental activity was carried out in the combustion chamber of an optically accessible, single-cylinder P.F.I. engine equipped with a commercial head. The experimental data consisted of optical measurements correlated to the combustion and auto-ignition processes within the cylinder. The optical measurements were based on 2-D digital imaging, UV visible natural emission spectroscopy and the chemiluminescence of radical species (OH and HCO). The engine parameters, the pressure signals of the related data and optical acquisition are compared on an individual cycle basis in the simulation by running the engine at a constant speed and varying the spark advance from normal combustion to heavy knock conditions.     

Cross-sectional shape design and optimization of automotive body with stamping constraints

At conceptual design stage, automotive body is usually simplified as a frame structure, which consists of thinwalled beams (TWBs). Therefore, the most important issue is to determine the cross-sectional shape of TWBs under the requirement of mechanical properties. However, design engineers mostly depend on their experience or repeated modification to design the cross-sectional shape of TWBs. So this paper presents a rapidly cross-sectional shape design and optimization method to satisfy the demand of mechanical properties and meanwhile minimize the weight of TWB. Firstly, cross-sectional mechanics property formulations are summarized. Especially, the torsional rigidity formulation of three-cell cross section is derived for the first time in this paper. Secondly, the shape optimization model is created to minimize the weight of TWB and improve the mechanical properties, which is solved by genetic algorithm. Moreover, three stamping constraints, draft angle, chamfer radius and assembly, are introduced to promote the cross-sectional shape more practice. Lastly, numerical examples verify the effectiveness of the optimization model and show the application in structural modification of automotive frame.     

A spatial decision support system for retail plan generation and impact assessment

Current geographic information systems typically offer limited analytical capabilities and lack the flexibility to support spatial decision making effectively. Spatial decision support systems aim to fill this gap. Following this approach, this paper describes an operational system for integrated land-use and transportation planning called Location Planner. The system integrates a wide variety of spatial models in a flexible and easy-to-use problem solving environment. Users are able to construct a model out of available components and use the model for impact analysis and optimization. Thus, in contrast to existing spatial decision support systems, the proposed system allows users to address a wide range of problems. The paper describes the architecture of the system and an illustrative application. Furthermore, the potentials of the system for land-use and transportation planning are discussed.     

美国新泽西州马纳霍金海湾大桥的疲劳问题

美国新泽西州72号公路马纳霍金海湾大桥的上部结构由17跨连续及悬臂铆接钢板梁和横梁系统组成,其中包括5跨销钉一吊杆悬挂梁.由于桥梁的"结构性能不足",20世纪90年代初对大桥进行了系统的修复工作.修复实施过程中,在很多部位发现了疲劳裂纹和桥面板混凝土剥落,疲劳裂纹主要为出现在横梁腹板的水平裂纹、横梁与主梁间托板连接角钢...