Mechanism of Tunnel Water Inflow Caused by Bending Failure of a Waterproof Dike Based on a Circular Thin Plate Mechanical Model北大核心CSCD

Water bursts during tunnel construction endanger construction, and it is therefore necessary to reserve a waterproof dike with the required thickness to avoid water bursts and to take reinforcement of the dike and treatment of the structure liable to trigger a water burst. Using the water burst at K5+398 of the Mingyueshan tunnel of the Shanghai-Chengdu expressway as an example, and considering the type of tunnel section and the upright mudstone of the dike, the waterproof dike at the work face is simplified as a round thin plate. A formula for the calculation of a minimum safety thickness for the critical waterproof dike is deduced by analyzing the force applied on the water-proof dike, and the minimum safety thickness for the water burst section at K5+398 of the Mingyueshan tunnel is cal-culated. The numerical simulation analysis demonstrates the critical thickness of waterproof dike at K5+398 of the Mingyueshan tunnel is 1.4-1.55 m, and the calculated water inflow and water burst basically agree with the actual condition. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Model Test on Grouting Law in Dynamic Water-Rich Sand Layers by the Electric Resistance Method北大核心CSCD

In order to study the diffusion law of grouting slurry in the water-rich sand layer under flowing water conditions, a grouting test model consisting of a main test system, a grouting system, and a measurement system was developed. And for detecting the diffusion scope of the grouts, a new resistivity method was proposed. It is found that the relationship between grouting pressure and grouting rate during the test is strong. Under hydrodynamic conditions, the grouting slurry diffuses elliptically. Due to gravity and the effect of the upper water flow, the center of gravity of the ellipsoid is below the grouting outlet, and the grouting effectively improves the physical and mechanical properties of water-rich sand bodies. At the same time, the resistivity method has a good application effect on the detection of grouting diffusion range. The range of slurry diffusion obtained by the resistivity method is basically consistent with the boundary of the stone body after excavation, indicating that the resistivity method is reliable for detection of grouting range in dynamic water-rich sand layer. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Numerical Simulation of Advanced Geological Forecasting Based on Multi- Source Seismic Interferometry北大核心CSCD

For existing advanced geological forecasting, the forecast distance is short and the test frequency is high, increasing test and construction risks. Since various methods have different requirements for the test environ-ment, preparation work can be tedious and result in a long construction time thereby affecting normal construction.A new advanced geological forecast technique based on multi-source seismic interferometry for tunnels is proposed.This technique uses the blast at one end of tunnel as a centrum and receives the signal at the other end of the tun-nel, therefore allowing advanced geological forecasting of the unexcavated tunnel part by relative processing and im-aging. A numerical simulation of this kind of geological forecasting using the finite difference method to simulate two kinds of unfavorable geological bodies (karst and a fault) predicted them accurately and verified the effective-ness and accuracy of this geological forecasting method. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Impact of ICT access on personal activity space and greenhouse gas production: evidence from Quebec City, Canada

This paper presents an approach to investigating the impact of information and communication technologies (ICTs) on travel behaviour and its environmental effects. The paper focuses on the spatial dispersion of out-of-home activities and travel (activity space) and greenhouse gas emissions (GHGs) at the level of the individual. An original method, combining spatial analysis in a geographic information system with advanced regression techniques, is proposed to explore these potentially complex relationships in the case of access to mobile phones and the internet, while taking into account the influence of socio-economics and built environment factors. The proposed methodology is tested using a 7-day activity-based survey in Quebec City in 2003?C2004, a juncture of particular interest because these ICTs had recently crossed the threshold of 40?% (mobile phone) and 60?% (home-based internet) penetration at the time. The study period also largely pre-dates the era of mobile internet access. Among other results, socio-demographic factors were found to significantly affect both ICT access and travel out-comes. The built environment, represented by neighbourhood typologies, also played an important role. However, it was found that after controlling for the self-selection effect, built environment and socio-demographics, those who had a mobile phone available produced 30?% more GHGs during the observed week than those who did not. This higher level of GHG pro-duction was accompanied by a 12?% higher measure of activity dispersion. On the other hand, having internet access at home was associated with lower GHGs (?19?%) and lesser activity dispersion (?25?%). Possibly, mobile phones enable individuals to cover more space and produce more emissions, while the internet provides opportunities to stay at home or avoid motorized travel thus reducing emissions. The estimated effects of having a mobile phone were not only negative but also larger in magnitude from the environmental point of view than those of fixed internet access. However, the results of this study also suggest that access to mobile phones and internet may have substantial and compensatory effects at the individual level that are undetected when using model structures that do not take into account that unobserved factors may influence both ICT choices and travel outcomes.     

The role of perceived environment,neighbourhood characteristics,and attitudes in walking behaviour: evidence from a rapidly developing city in China

Transportation - The associations between objective and subjective dimensions of the built environment and walking behaviour have been examined extensively in existing studies. However, the...     

Using multiple hybrid spatial design network analysis to predict longitudinal effect of a major city centre redevelopment on pedestrian flows

Transportation - Predicting how changes to the urban environment layout will affect the spatial distribution of pedestrian flows is important for environmental, social and economic sustainability....     

Automation of paratransit reservation,routing, and scheduling

Santa Clara County, California experienced a sharp growth in demand‐responsive paratransit ridership for individuals with disabilities, as a result of the passage of the 1990 Americans With Disabilities Act (ADA). This paper describes an automated paratransit system for the ADA‐type paratransit operation implemented in Santa Clara County. It automated paratransit reservation, scheduling, and routing functions. The key components of this system were a digital geographic database (DGD) and an automated trip scheduling system (ATSS). Empirical evidence after one year of operation indicates numerous benefits of this automation. There were significant reductions in the paratransit operating costs and an increase in the percent shared rides. The savings in operating costs far exceeded the annualized capital cost of automation. A user survey indicates that these improvements were achieved without degradation to service quality such as vehicle on‐time performance, invehicle travel times, vehicle response to open return, and ride comfort.     

Privatization of urban transit: The Los Angeles jitney experience

This paper reports on a recent attempt to provide private transit in the form of jitney service in downtown Los Angeles. It describes the process undertaken to initiate jitney service and the resultant organization's structure and operation. A survey of jitney passengers provided information on the users and their tripmaking characteristics. A group of loyal jitney riders emerged who patronized the service because of its lower travel times and more personalized atmosphere. This group formed the core of frequent users. The Los Angeles experience is analyzed in terms of the economic feasibility of jitney service and the impact on the financial status of public transit. The public transit agency experienced a slight negative financial impact as a result of the jitney service. Ridership during peak hours declined somewhat but the jitney service was not frequent enough to carry sufficient passengers to allow the transit agency to cut costly peak hour service. This analysis shows that the jitney service ultimately was not an economically successful operation. The factors which would have increased the likelihood of success were increased frequency of service and higher fares, which would have been sustainable if not for unexpected developments in public transit financing. A labor pool willing to work for low wages, high transit use in the central city, relatively high transit fares and the availability of inexpensive vehicles appear to be prerequisites to a successful urban jitney operation.     

Mathematical model for optimising the sequence for clearing snow from the manoeuvring area during winter operations

This article considers the optimisation of the sequence for clearing snow from stretches of the manoeuvring area of an airport. This issue involves the optimisation of limited resources to remove snow from taxiways and runways thereby leaving them in an acceptable condition for operating aircraft. The airfield is divided into subsets of significant stretches for the purpose of operations and target times are established during which these are open to aircraft traffic. The document contains several mathematical models each with different functions, such as the end time of the process, the sum of the end times of each stretch and gap between the estimated and the real end times. During this process, we introduce different operating restrictions on partial fulfilment of the operational targets as applied to zones of special interest, or relating to the operation of the snow‐clearing machines. The problem is solved by optimisation based on linear programming. The article gives the results of the computational tests carried out on five distinct models of the manoeuvring area, which cover increasingly complex situations and larger areas. The mathematical model is particularised for the case of the manoeuvring area of Adolfo Suarez Madrid—Barajas Airport. Copyright © 2016 John Wiley & Sons, Ltd.

Highlights
• Optimal sequence for clearing snow from the manoeuvring area of an airport.
• Contains optimising algorithms solved using CPLEX LP‐based tree search.
• Restrictions on partial fulfilment of operational targets applied to subsets of significant stretches, used for planning the operation of snow‐clearing machines.
• Model applied to the case of the manoeuvring area of Adolfo Suárez Madrid Barajas Airport.
• Conclusions are given on the results of the computational tests carried out. There are five models of the manoeuvring area which cover increasingly complex situations and larger areas.

     

Modification of the Highway Capacity Manual two‐lane highway analysis procedure for Spanish conditions

The US Highway Capacity Manual (HCM) methodology is used in Spain to evaluate traffic operation and quality of service. The effect of passing manoeuvre on two‐lane highway operational performance is considered through adjustment factors to average travel speeds and percent time spent following. The procedure is largely based on simulations in TWOPAS and passing behaviours observed during US calibrations in the 1970s. It is not clear whether US driving behaviour and vehicles' performance are comparable with Spanish conditions. The objective of this research is to adapt the HCM 2010 methodology to Spanish driver behaviour, for base conditions (i.e. no passing restrictions). To do so, TWOPAS was calibrated and validated based on current Spanish passing field data. The calibration used a genetic algorithm. The case study included an ideal two‐lane highway with varying directional traffic flow rate, directional split and percentage of trucks. The updated methodology for base conditions is simpler than the current HCM 2010 and does not rely on interpolation from tables. Copyright © 2016 John Wiley & Sons, Ltd.