Joint development at transit stations in the United States

Joint development, as the term is generally used in connection with transit systems in the United States, is real estate development that is closely linked to public transportation services and station facilities, and takes advantage of the market and locational advantages provided by them. Research conducted by LEK Associates for the Urban Mass Transportation Administration (UMTA) suggests that, in addition to helping shape urban growth and land development, joint development is also a surprisingly effective means of increasing transit system ridership and farebox revenues, as well as a source of increasingly significant revenues from the sale or lease of air rights.The completion of nine joint development projects in as many different cities, started under the former Urban Initiatives Program, for example, net additional annual ridership might reach 12000000 one-way trips. Net additional annual farebox revenues might reach over $9000000. This added revenue would be sufficient to repay the $62 million combined UMTA/transit operator investment in the nine projects, exclusive of the costs of the basic transit system improvements around which the projects are planned, in less than six years.Among transit authority-administered joint development programs examined in a separate study, the Washington Metropolitan Area Transit Authority (WMATA) has had the most success in generating significant value capture income. For example, the cumulative revenue realized by WMATA from just six joint development projects in the Washington, DC region, through September 1983 exceeded $ 6.9 million. Projections through fiscal year 1986 indicate cumulative revenues approximating $ 28 million will be received from developer leases.     

功率循环测试中衬底焊接层的可靠性

基板与陶瓷衬底之间的焊层寿命通常利用IGBT模块的被动加热和冷却(热循环)来测试,但这种试验会引起焊层失效(分层)。实际应用中,IGBT和二极管芯片是主动被加热的,诸如焊线脱落等其它模式的失效也会限制使用寿命,通常可通过功率循环试验来评估这种应力的影响。本文通过功率循环试验来评估衬底焊层的失效,利用高循环周次的测试进行有效的衬底焊层热循环试验,其关键在于功率循环过程中焊层温度的预测。在温度波动不大的条件下,比较了被动热循环和主动功率循环时对焊接寿命的影响。     

A simple formulation for predicting the ultimate strength of ships

The aim of this study is to derive a simple analytical formula for predicting the ultimate collapse strength of a single- and double-hull ship under a vertical bending moment, and also to characterize the accuracy and applicability for earlier approximate formulations. It is known that a ship hull will reach the overall collapse state if both collapse of the compression flange and yielding of the tension flange occur. Side shells in the vicinity of the compression and the tension flanges will often fail also, but the material around the final neutral axis will remain in the elastic state. Based on this observation, a credible distribution of longitudinal stresses around the hull section at the overall collapse state is assumed, and an explicit analytical equation for calculating the hull ultimate strength is obtained. A comparison between the derived formula and existing expressions is made for largescale box girder models, a one-third-scale frigate hull model, and full-scale ship hulls.List of symbols A _B total sectional area of outer bottom - A _B total sectional area of inner bottom - A _D total sectional area of deck - A _S half-sectional area of all sides (including longitudinal bulkheads and inner sides) - a _s sectional area of a longitudinal stiffener with effective plating - b breadth of plate between longitudinal stiffeners - D hull depth - D _B height of double bottom - E Young's modulus - g neutral axis position above the base line in the sagging condition or below the deck in the hogging condition - H depth of hull section in linear elastic state - I _s moment of inertia of a longitudinal stiffener with effective plating - l length of a longitudinal stiffener between transverse beams - M _E elastic bending moment - M _p fully plastic bending moment of hull section - M _u ultimate bending moment capacity of hull section - M _uh ,M _us ultimate bending moment in hogging or sagging conditions - r radius of gyration of a longitudinal stiffener with effective plating [=(I _s /a _s )^1/2] - t plate thickness - Z elastic section modulus at the compression flange - Z _B ,Z _D elastic section modulus at bottom or deck - slenderness ratio of plate between stiffeners [= (b/t)(_y/E)^1/2] - slenderness ratio of a longitudinal stiffener with effective plating [=(l/r)(_y/E)^1/2] - _y yield strength of the material - _yB , _yB , _yD yield strength of outer bottom, inner bottom - _yS deck, or side - _u ultimate buckling strength of the compression flange - _uB , _uB , _uD ultimate buckling strength of outer bottom - _uS inner bottom, deck, or side     

Performance indicators for transit management

Transit performance can be evaluated through quantitative indicators. As the provision of efficient and effective transit service are appropriate goals to be encouraged by federal and state governments, these goals are used to develop performance indicators.Three efficiency and four effectiveness indicators are described, together with two overall indicators. These nine indicators are analyzed for comparability utilizing operating and financial data collected from public transit agencies in California.Performance indicators selected for this study should not be viewed as final. Twenty-one performance indicators proposed by previous studies were reviewed. Theoretical considerations and unavailability or unreliability of data caused omission of several useful measures like passenger-miles. Circumstances such as improved data, emphasis upon goals other than efficiency and effectiveness, and local conditions might warrant the inclusion of indicators deleted from this research.This paper is based on work conducted for the Urban Mass Transportation Administration under University Research and Training Grant CA-11-0014, Development of Performance Indicators for Transit. The views expressed herein are those of the authors and not necessarily those of the University of California or the United States Government. We are indebted to John Feren for assistance with the statistical processing and data gathering.     

Correlation between automotive CO, HC, NO, and PM emission factors from on-road remote sensing: implications for inspection and maintenance programs

Carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NO) emission factors (EFs) are measured with a commercial vehicle emissions remote sensing system (VERSS) during a large-scale vehicle exhaust emissions study in Las Vegas. Particulate matter (PM) EFs are simultaneously measured for individual vehicles with a newly developed PM-VERSS based on ultraviolet backscatter light detection and ranging (Lidar). The effectiveness of CO and HC EFs as proxy for NO and PM EFs for spark-ignition vehicles is evaluated. Poor correlations were found between EFs for pollutants on an individual vehicle basis indicating that high EFs for one or more pollutants cannot be used as a predictor of high EFs for other pollutants. Stronger functional relationships became evident after averaging the EF data in bins based on rank-order of a single pollutant EF. Low overlap between the highest 10% emitters for CO, HC, NO, and PM was found. These results imply that for an effective reduction of the four pollutants, inspection and maintenance (I/M) programs, including clean screening, should measure all four pollutants individually. Fleet average CO and HC concentrations determined by gaseous VERSS were compared with fleet average CO and HC concentrations measured at low-idle and at high-idle during local I/M tests for spark-ignition vehicles. The fleet average CO concentrations measured by I/M tests at either idle were about half of those measured by remote sensing. The fleet average high-idle HC concentration measured by I/M tests was about half of that measured by VERSS while low-idle I/M and VERSS HC average concentrations were in better agreement. For a typical vehicle trip, most of the fuel is burned during non-idle conditions. I/M measurements collected during idling conditions may not be a good indicator of a vehicle’s potential to be a high emitter. VERSS measurements, when the vehicle is under a load, should more effectively identify high emitting vehicles that have a large contribution to the mobile emissions inventory.     

Hub location with flow economies of scale

A characteristic feature of hub and spoke networks is the bundling of flows on the interhub links. This agglomeration of flows leads to reduced travel costs across the interhub links. Current models of hub location do not adequately model the scale economies of flow that accrue due to the agglomeration of flows. This paper shows that current hub location models, by assuming flow-independent costs, not only miscalculate total network cost, but may also erroneously select optimal hub locations and allocations. The model presented in this paper more explicitly models the scale economies that are generated on the interhub links and in doing so provides a more reliable model representation of the reality of hub and spoke networks.     

Fuzzy Logic Active and Semi-Active Control of Off-Road Vehicle Suspensions

For off-road vehicles, minimizing the absorbed power is the main objective of suspension control. The primary cause of increase in the absorbed power in off-road vehicles driven at high speeds on harsh courses is the exhaustion of the suspension travel. Fuzzy-logic approach to active and semi-active off-road vehicle suspension control, with the goal of improving the speed of the vehicle over rough terrains are developed. The ride metric used for quantifying improvements is the absorbed power of the sprung mass. Particular attention is paid to the proper modeling of the suspension using both the full kinematic constraints and the more convenient two degree of freedom linear model of the quarter vehicle suspension. The nonlinearities due to the kinematic constraints on motion are accounted for by modifying the stiffness and damping coefficients of the suspension spring and dashpot in the linear model. The control laws are developed using the less complex model and demonstrated in the fully constrained environment. Nonlinearities of the suspension, including tire stiffness/damping and bumpstops are included at all stages of controller development.     

Novel Electrically Stimulated Catalytic Converter Prototype for Replacement of Conventional Auto Exhaust Emission Converters

High voltage electrostatics and corona discharge are utilized for various applications in pollution and environmental control. The traditional applications have many flaws due to improper construction of electrode design and assembly that cause system failure, in particular when electrically stimulated devices are exposed to high humidity. A new innovative-patented design by Hamade, electrically stimulated catalytic converter(ESCC),eliminates such flaws and shows the wide practical applications of the new design. The new design utilized previous patented designs and work of the same inventor but retrofitted for catalytic auto exhaust emission control. The current and previous patents include: employing electrically stimulated filtration(ESF) to replace high efficiency particulate air(HEPA) filters, treatment of biological and infectious diseases, electret fabrication, and, most notably, the invention of a new electrically stimulated catalytic converter(ESCC). The electrically stimulated catalytic converter invention includes an exhaust conduit fed from the engine exhaust port with a housed corona charger apparatus. The opposite end is opened to the atmosphere outside of the vehicle or connected to a reduced-size catalytic converter. The corona charger is intrusively or non-intrusively associated with a main flow path defined by the exhaust conduit. The corona charger includes at least one electrode, which may be recessed away from, the main flow path. A plurality of corona chargers may be used in various combinations, optimally a two dimensional grid. The electrically stimulated catalytic converter is adapted to treat and eliminate auto exhaust pollution emission to air.     

A hedonic test of the effects of the Alternative Motor Fuels Act

Under the Alternative Motor Fuels Act (AMFA), vehicles that run on ethanol, methanol, or natural gas get extra credits in the calculation of Corporate Average Fuel Economy (CAFE). This paper uses hedonic techniques to examine the effect of production of alternative-fuel vehicles (AFVs) on the implicit price of fuel economy. This study finds that, after AFVs came to market, the marginal value of fuel economy from companies producing them decreased. This finding suggests that manufacturers who produced AFVs were willing to offer a lower price for fuel economy, because automakers had an additional way to achieve fuel economy standards beyond improving the fuel efficiency of conventional cars. These findings bolster the argument that a major role of the AMFA credit for AFVs is to allow automakers to increase their production of fuel-inefficient vehicles.