谐波对牵引变压器损耗的影响

根据一个牵引变压器的损耗,提出了谐波对绕组电阻的影响.对同心式和饼式线圈的变压器进行了分析.使用二维有限元计算软件"Flux2D"进行了多种仿真,并且将其结果与实际变压器测量值进行对比,提出一个简单的定律,由此可确定2种不同类型变压器电阻随频率的变化规律.     

The place of the ISPS Code in the legal international regime

The adoption of the International Ship and Port Facility Security Code (ISPS Code) is the latest response of the international shipping community to the increasing threat posed by acts of terrorism at sea. The ACHILLE LAURO incident of 1985 showed that the traditional law against piracy was not adequate to deal with new types of unlawful acts against international shipping, especially those involving acts of terrorism. The 1988 Convention for the Suppression of Unlawful Acts against the Safety of Maritime Navigation (SUA Convention) and the technical and administrative measures adopted by the Maritime Safety Committee of IMO in 1986 and 1996 attempted to develop a broader regime to deal with unlawful acts against international shipping.However, the events of September 11, 2001 showed that additional measures were still needed to prevent terrorist attacks against ships.     

Sail–sail and sail–hull interaction effects of hybrid-sail assisted bulk carrier

In a previously reported study, wind tunnel experiments were undertaken to investigate the aerodynamic characteristics of hybrid-sails in isolation. Such sails are seen as providing a worthwhile reduction in the delivered power to the propeller and hence the engine generated thrust, with a corresponding reduction in the CO₂ production of diesel engine exhaust. In this paper, wind tunnel testing is used to investigate sail–sail interaction effects for two sets of four identical hybrid-sails, and the sail–hull interaction effects for the same two sets of four identical sails in the presence of a bulk carrier hullform. The analysis presented suggests that to build a sail-assisted ship requires an appreciation of the sail–sail and sail–hull interaction effects.     

Adapting interactive stated response techniques to a self-completion survey

We report here on how we adapted Interactive Stated Response Methods to use in a self-completion survey of 454 California households to measure the market for electric vehicles in California. Electric vehicles are a novel product and have many features unfamiliar to consumers, in particular their home recharging capability and limited range. Reflexive techniques were designed to draw households into a deeper exploration of the lifestyle implications of electric vehicles than can be done in more typical self-completion surveys, and to stimulate key decision processes previously observed in detailed gaming interviews with 51 households. Reflexive self-completion techniques provide a middle course between typical large sample quantitative surveys and small sample, detailed gaming interviews. One of the benefits of the more intensive techniques was that participants reported finding the surveys interesting and return rates were high for a self-completion approach – over sixty percent. We review previous transportation and sociological methods which inspired our design, describe the design goals and features of our research, and summarize research results pertinent to testing the validity of our approach.     

A reduced-gravity model of the Catalan Sea

A reduced-gravity model is used to study the effects of the wind on the upper layer circulation in the Catalan Sea. The model parameters were set by observed features of the circulation in the basin. It is shown that the results are particularly sensitive to the open sea boundary conditions. Simulations were done using the following boundary fluxes: (i) mean values estimated by Bethoux (1980) and (ii) more recent geostrophic transports computed from hydrographic data by Font et al. (1988). The latter seem to lead to more realistic circulation patterns. The influence of seasonal winds (climatological data) on the dynamics is clear, especially during the winter.     

An evaluation of vehicle deceleration profiles

Vehicles stopping at signalized intersections were examined for the purpose of evaluating the validity of the common assumption of constant and uniform deceleration rates. The data set consisted of the first vehicles to stop upon the onset of the yellow signal interval with measurements of the initial approach speed, deceleration time, and deceleration distance. The deceleration rate may be computed using only two of the three measured values; thus the rate for each vehicle can be determined by three different equations. With nonuniform deceleration profiles, the equations will produce different values; and the degree of nonuniformity can be determined by comparing the differences in the computed deceleration rates. The analysis of the field observations indicated that 69 percent of the vehicles demonstrated deceleration profiles associated with nonuniform deceleration rates. Furthermore, the deceleration profile and the degree of nonuniformity were found to be a function of the initial approach speed.     

Finding a balance: companies, seafarers and family life

Separation from partner and family has been found to be one of the most significant causes of stress for seafarers, with separation from the family one of the most important 'stress' factors influencing a decision to reduce planned sea service. Drawing on in-depth interviews with seafarers' partners in the UK, China and India, this paper focuses on the impact of seafaring on family life, with particular attention given to the effects of differing conditions of service and the range of company support available to seafarers and their partners. The paper concludes that the negative consequences of seafaring can be minimized by such policies as shorter trips, continuous employment (rather than employment by voyage) and opportunities for partners and families to sail. Whilst these measures may have financial costs, these can be off-set by improved retention of seafarers and the avoidance of stress-related illnesses. Indeed, at a time when there is a projected shortfall of well-trained seafarers, such steps may be sound company policy     

Sediment geochemistry and mineralogy in Milos bay, SW Kyklades, Aegean Sea, Greece

This work aims at studying the geochemistry and mineralogy of Milos bay surface sediments. The bay forms an enclosed marine area, supplied totally by volcanic formations. Totally 16 samples were subjected to sedimentological (grain size), mineralogical (microscope examination and X-ray diffraction of the bulk sample and the pelitic fraction), and geochemical analyses (X-ray fluorescence in the pelitic fraction). Also the carbonate content was determined. Sediments were sandy with a high carbonate content (14–58%). The dominant minerals recognized in the pelitic fraction were smectite, kaolinite and illite, followed by chlorite, quartz, calcite, Mg-calcite and feldspars. In general, element concentrations appeared to be within the normal range, except Pb and Zn, which exhibited relatively high values. The Index of Geoaccumulation I_geo was computed, in order to investigate a possible enrichment of the surface sediments in metals. The analysis revealed again high values of I_geo class for both Pb and Zn. A careful study of the area, in relation to the quality of the catchment basins petrology, lead to a non-anthropogenic origin of these high concentrations. The enrichment of the surface sediments in Pb and Zn is attributed to the weathering of several mineral deposits, pyroclastic rocks and lavas, covering almost all Milos vicinity. A study of the geochemical data correlation coefficient matrix revealed three major groups of elements: (i) the elements of detrital origin represented by Si, Al, K and a part of the metals; (ii) the carbonates group; and (iii) a Fe–Mn oxyhydroxides–oxides group, which attracts a part of Pb, Cr and Ni.     

Parametric study of the main parameters influencing the catalytic efficiency of a diesel oxidation catalyst: Parameters influencing the efficiency of a diesel catalyst

This work studies the impact of five parameters: CO and HC engine-out emissions, space velocity, average value and profile of exhaust temperature, on Diesel CO and HC tail-pipe emissions. The first part of this work is conducted on a reactor and shows that both HC and CO light-off temperature increases with CO and HC input concentration. CO and HC initial concentration influence the adsorption/desorption capacities of HC only at high temperatures. Space velocity also influences CO and HC conversion efficiency. The second part of this work studies the impact of different combinations of HC and CO engine-out emissions on CO and HC conversion and tail-pipe emissions in the case of New European Driving Cycle. This part proposes that a Diesel oxidation catalyst must be mainly studied at the Urban Part of NEDC, as the CO and HC conversions are very high at the extra-urban part of NEDC. CO and HC conversion efficiencies are also dependent on exhaust temperature and catalytic volume. In the case of two different profiles of exhaust temperature with the same average temperature, CO and HC conversion efficiency is lower in the case of the smoother profile.     

Effect of handling characteristics on minimum time cornering with torque vectoring

In this paper, the effect of both passive and actively-modified vehicle handling characteristics on minimum time manoeuvring for vehicles with 4-wheel torque vectoring (TV) capability is studied. First, a baseline optimal TV strategy is sought, independent of any causal control law. An optimal control problem (OCP) is initially formulated considering 4 independent wheel torque inputs, together with the steering angle rate, as the control variables. Using this formulation, the performance benefit using TV against an electric drive train with a fixed torque distribution, is demonstrated. The sensitivity of TV-controlled manoeuvre time to the passive understeer gradient of the vehicle is then studied. A second formulation of the OCP is introduced where a closed-loop TV controller is incorporated into the system dynamics of the OCP. This formulation allows the effect of actively modifying a vehicle's handling characteristic via TV on its minimum time cornering performance of the vehicle to be assessed. In particular, the effect of the target understeer gradient as the key tuning parameter of the literature-standard steady-state linear single-track model yaw rate reference is analysed.