Energy savings due to land transportation management in Singapore

Singapore has been actively engaged in implementing various land transportation policies and traffic management schemes since the early 1970s to reduce traffic congestion. This paper examines the benefits in energy savings arising from the following five major schemes: (a) the Area Licensing Scheme, (b) the computerised Area Traffic control System, (c) the adaptive traffic control system, (d) the exclusive bus lane scheme, and (e) the island-wide expressway system. The analyses are made based on the findings of a two-year study that developed vehicle fuel consumption models for Singapore traffic. The Area Licensing Scheme that restricts traffic flow into the Central Business District (CBD) is found to have the greatest energy impact, followed by the island-wide expressway system and the traffic-signals control systems within the CBD.     

Gateway diversity and competition in international air transportation

Because of the existence of limited designation gateways, i.e., gateways for international air travel where entry by U.S. flag carriers is limited (in many cases to only one carrier), the U.S. Civil Aeronautics Board (CAB) has announced a policy of gateway competition. This policy seeks to maximize inter-gateway competition as a goal of the carrier selection process. The paper reviews the rationale and history of this policy and the economic principles of gateway competition. After addressing exceptions where gateway competition does not enhance competitive goals, the issue of how to enforce the credibility of the bidding process in route awards is addressed. The paper concludes by identifying circumstances where competitive objectives are not advanced through application of the principle gateway competition.     

Distributed algorithm for empty vehicles management in personal rapid transit (PRT) network

In this paper, an original heuristic algorithm of empty vehicles management in personal rapid transit network is presented. The algorithm is used for the delivery of empty vehicles for waiting passengers, for balancing the distribution of empty vehicles within the network, and for providing an empty space for vehicles approaching a station. Each of these tasks involves a decision on the trip that has to be done by a selected empty vehicle from its actual location to some determined destination. The decisions are based on a multi‐parameter function involving a set of factors and thresholds. An important feature of the algorithm is that it does not use any central database of passenger input (demand) and locations of free vehicles. Instead, it is based on the local exchange of data between stations: on their states and on the vehicles they expect. Therefore, it seems well‐tailored for a distributed implementation. The algorithm is uniform, meaning that the same basic procedure is used for multiple tasks using a task‐specific set of parameters. Copyright © 2016 John Wiley & Sons, Ltd.     

上软下硬地层大直径土压平衡盾构下穿民房建筑群沉降控制北大核心CSCD

依托广州地铁18号线盾构施工,针对其地层分布复杂、软硬差异大及穿越密集民房建筑群等特点,通过注浆加固、现场动态监测、优化掘进参数等一系列主动措施,解决实际工程中掘进参数合理取值与地表建筑沉降变形控制两大难题。研究结果表明:(1)在该类软硬地层中掘进时,刀盘在通过不同岩层断面分界线时扭矩、推力等参数波动较大,总推力与扭矩有良好的相关性,各掘进参数宜控制为:推力30000~35000 kN、扭矩4500~6000 kN·m、推进速度35~45 mm/min;(2)提出的多段式封孔洞内超前注浆工艺可使刀盘前18 m范围内的地表上抬3~5 mm,最大上抬值能达9.02 mm,同时能缓解土体在盾构下穿时及后续固结稳定的沉降趋势;(3)因刀具磨损、掘进参数波动大、螺旋机卡死等引起的临时停机会造成地表建筑日沉降速率超过3 mm/d,在预设停机点位置前采取洞内超前注浆和克泥效工法能有效缓解沉降趋势,在带压开舱期间日沉降速率控制在2 mm/d以下;(4)左右隧道轴线附近的地表建筑沉降基本可分为“微小隆起—沉降较大—逐渐稳定”三个阶段,测点最大沉降值最终稳定在-21.38 mm、-22.49 mm,均小于控制值。     

Study on Mechanical Properties of Tunnel Lining Structure with Spray-applied Waterproofing Membrane北大核心CSCD

In order to study the influence of spray-applied waterproofing membrane layer on the mechanical properties of tunnel lining structure, a numerical calculation model of composite lining, spray-applied waterproofing lining and single-shell lining is established according to the mechanical parameters and interface parameters of waterproofing membrane measured by tests, and comparative analysis is made on the mechanical properties of the three types of lining structures. The research results show that: (1) compared with the composite lining, the stress of the secondary lining in the spray-applied waterproofing lining structure is significantly reduced, and the stress of the initial support has little change, but the displacement of both the initial support and the secondary lining increases; (2) in the spray-applied waterproofing lining structure, the whole section of the secondary lining is in the state of small eccentric compression, and the safety factor is greatly improved; (3) spray-applied waterproofing membrane layer can improve the cooperative force-bearing capacity of initial support and secondary lining, and improve the stress state of secondary lining, which is beneficial to improve the safety of secondary lining; and (4) with the increase of the cooperative force-bearing capacity of spray-applied waterproofing lining structure, the internal force of spray-applied waterproofing lining structure will be infinitely close to that of single-shell lining structure. © 2022, Editorial Office of Modern Tunnelling Technology. All right reserved.     

临近端头井盾构开挖引起土体沉降数值分析北大核心CSCD

文章以南昌地铁2号线雅苑路站施工为例,基于小应变硬化土体(HSS)本构模型,建立从端头井始发的双线盾构隧道掘进模型,分析了基坑开挖与双线盾构掘进共同作用下的土体沉降规律。结果表明:(1)加固盾构始发区土体可有效减弱区域范围内地表沉降,该区域内地表沉降量远小于区间隧道沉降量;(2)在同一埋深条件下,先建隧道地表沉降最大值高于后建隧道地表沉降最大值,地表横向沉降槽呈现非对称W型;(3)基坑开挖与盾构掘进共同作用下引起的地表沉降值,可以由二者单独作用产生的沉降值叠加计算得到。     

Effects of the fuel injection ratio on the emission and combustion performances of the partially premixed charge compression ignition combustion engine applied with the split injection method

Currently, due to the severity of world-wide air pollution by substances emitted from vehicles, emission control is being enforced more strictly, and it is expected that the regulation requirements for emission will become even more severe. A new concept combustion technology that can reduce the Nitrogen oxides (NOx) and PM in relation to combustion is urgently required. As a core combustion technology among new combustion technologies for the next generation engine, the homogenous charge compression ignition (HCCI) is expanding its application range by adopting a multiple combustion mode, a catalyst, direct fuel injection and partially premixed charge compression ignition combustion using the split injection method. This paper used a split injection method in order to apply the partially premixed charge compression ignition combustion method without significantly altering engine specifications of the multiple combustion mode and practicality by referring to the results of studies on the HCCI engine. Furthermore, the effects of the ratio of the fuel injection amount on split injection are investigated. From the test results, the adequate combination of the ratio of the fuel injection amount for the split injection method has some benefit on exhaust and fuel economy performance in a naturally aspirated single cylinder diesel engine.     

Fuzzy and adaptive fuzzy control for the automobiles' active suspension system

Two typical criteria for good vehicle suspension performance are their ability to provide good road handling and increased passenger comfort. The main disturbance affecting these two criteria is terrain irregularities. Active suspension control systems reduce these undesirable effects by isolating car body motion from vibrations at the wheels. This paper describes fuzzy and adaptive fuzzy control (AFC) schemes for the automobile active suspension system (ASS). The design objective is to provide smooth vertical motion so as to achieve the road holding and riding comfort over a wide range of road profiles. The efficacy of the proposed control schemes is demonstrated via simulations. With respect to the optimal linear quadratic regulator (LQR), it is shown that superior results have been achieved by the AFC.     

Approximate Dynamic Shimmy Response of Pneumatic Tires*

An improved approximation of the theory of the dynamic frequency response of side force and aligning torque acting upon the rolling wheel when the latter is moved laterally and swivelled about the vertical axis, is presented. The method is particularly suitable for application in vibration problems of steering and suspension systems of automobiles and aircraft where relatively high speed and high frequency phenomena play a role. The theoretical results show satisfactory agreement with experimental data. Calculations indicate that the inertia of the tire decreases the tendency to shimmy at higher frequencies and speeds of travel. For castered wheels however, tire inertia may have an adverse effect due to its unfavorable influence upon the side force response to swivel motions.