Development of railway station choice models to improve the representation of station catchments in rail demand models

ABSTRACT

This paper describes the development of railway station choice models suitable for defining probabilistic station catchments. These catchments can then be incorporated into the aggregate demand models typically used to forecast demand for new rail stations. Revealed preference passenger survey data obtained from the Welsh and Scottish Governments was used for model calibration. Techniques were developed to identify trip origins and destinations from incomplete address information and to automatically validate reported trips. A bespoke trip planner was used to derive mode-specific station access variables and train leg measures. The results from a number of multinomial logit and random parameter (mixed) logit models are presented and their predictive performance assessed. The models were found to have substantially superior predictive accuracy compared to the base model (which assumes the nearest station has a probability of one), indicating that their incorporation into passenger demand forecasting methods has the potential to significantly improve model predictive performance.     

Back-Calculation of Ground Stress Field and Rockburst Analysis for Wunvfeng Tunnel北大核心CSCD

Studying the in-situ stress distribution at a tunnel site is very important to determine surrounding rock characteristics, the engineering design and the construction scheme. By using the multiple linear regression method based on the least square algorithm, the initial geostress field is analyzed and the corresponding regression coefficients are obtained. The ground stress obtained from the proposed back analysis is reasonable and can meet the demands of the engineering applications. From the rockburst risk level distribution diagram, it is speculated that the Wunvfeng tunnel is in the high filed stress area. Field monitoring should be strengthened and emergency plans should be made to cope with the rockburst risks during the construction process. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Genetics of traffic assignment models for strategic transport planning

This paper presents a review and classification of traffic assignment models for strategic transport planning purposes by using concepts analogous to genetics in biology. Traffic assignment models share the same theoretical framework (DNA), but differ in capability (genes). We argue that all traffic assignment models can be described by three genes. The first gene determines the spatial capability (unrestricted, capacity restrained, capacity constrained, and capacity and storage constrained) described by four spatial assumptions (shape of the fundamental diagram, capacity constraints, storage constraints, and turn flow restrictions). The second gene determines the temporal capability (static, semi-dynamic, and dynamic) described by three temporal assumptions (wave speeds, vehicle propagation speeds, and residual traffic transfer). The third gene determines the behavioural capability (all-or-nothing, one shot, and equilibrium) described by two behavioural assumptions (decision-making and travel time consideration). This classification provides a deeper understanding of the often implicit assumptions made in traffic assignment models described in the literature. It further allows for comparing different models in terms of functionality, and paves the way for developing novel traffic assignment models.     

在建盾构隧道突发管片破损病害成因分析及治理措施研究北大核心CSCD

盾构法广泛应用于我国城市轨道交通隧道的建设中,盾构管片的病害问题也越发受到重视。文章针对某地铁在建盾构隧道突发管片破损病害,绘制了管片破损病害展布图,分析了相关资料和检测数据,明确了病害的成因机理,制定并实施了相应治理措施。研究结果表明:管片背后大范围空洞导致围岩对隧道的约束不足,引起已成型隧道在盾构机反推力和扭矩、同步注浆浆液浮力、刀盘水土压力和扭矩等作用下发生类压杆弯扭失稳是导致该病害的主要原因;隧道变形监测数据表明"背后注浆填充+破损部位修复"两阶段治理措施取得了良好的治理效果;盾构隧道施工过程中,应严格管控同步注浆质量,防止隧道轴线偏移引起盾构管片发生开裂破损等病害。     

Elemental composition, biochemical composition and caloric value of Antarctic krill.: Implications in Energetics and carbon balances

Samples of Antarctic krill were analyzed for elemental composition, biochemical composition, weight and caloric content. Sexes and maturity stages were separated. Mature females showed the highest caloric values (Joules) and juveniles the lowest in a per animal basis. On unit of wet weight per animal basis, spent females showed the lowest caloric values. For the caloric values by animal, a significant difference was found between males, mature females, spent females and juveniles, either on a per animal basis or in the basis of 1 g of wet weight, showing a real difference between the groups, regardless of their individual size. Significant differences were found for carbon, nitrogen and lipids, but not for proteins, analyzed in % of dry weight. Carbon was lowest for spent females and highest for mature females. On the contrary, nitrogen values were lowest for mature females and highest for males. Mature females had the highest lipid content and males the lowest. All variables were significantly correlated. For the linear regression analysis, the best correlation found was between Joules and carbon, followed by carbon vs. dry weight and Joules vs. dry weight. In an analysis with two independent variables, the best correlation was found for Joules vs. lipids and dry weight, followed by Joules vs. carbon and nitrogen, and Joules vs. lipids and proteins. The results obtained were used to make an analysis of the energy and carbon fluxes through the food chain in the sampled area, showing higher energetic and carbon “densities” in frontal areas, the POM calorific values showed an opposite pattern than that of krill.     

The structure of dissipation in the western Irish Sea front

We report on an intensive campaign in the summer of 2006 to observe turbulent energy dissipation in the vicinity of a tidal mixing front which separates well mixed and seasonally stratified regimes in the western Irish Sea. The rate of turbulent dissipation ε was observed on a section across the front by a combination of vertical profiles with the FLY dissipation profiler and horizontal profiles by shear sensors mounted on an AUV (Autosub). Mean flow conditions and stratification were obtained from a bed mounted ADCP and a vertical chain of thermistors on a mooring. During an Autosub mission of 60 h, the vehicle, moving at a speed of ~ 1.2 m s^− 1, completed 10 useable frontal crossings between end points which were allowed to move with the mean flow. The results were combined with parallel measurements of the vertical profile of ε which were made using FLY for periods of up to 13 h at positions along the Autosub track. The two data sets, which show a satisfactory degree of consistency, were combined to elucidate the space–time variation of dissipation in the frontal zone. Using harmonic analysis, the spatial structure of dissipation was separated from the strong time dependent signal at the M₄ tidal frequency to yield a picture of the cross-frontal distribution of energy dissipation. A complementary picture of the frontal velocity field was obtained from a moored ADCP and estimates of the mean velocity derived from the thermal wind using the observed density distribution. which indicated the presence of a strong (0.2 m s^− 1) jet-like flow in the high gradient region of the front. Under neap tidal conditions, mean dissipation varied across the section by 3 orders of magnitude exceeding 10^− 2 W m^− 3 near the seabed in the mixed regime and decreasing to 10^− 5 W m^− 3. in the strongly stratified interior regime. The spatial pattern of dissipation is consistent in general form with the predictions of models of tidal mixing and does not reflect any strong influence by the frontal jet.     

Influence of the slice position on chloride migration tests for concrete in marine conditions

Chloride migration tests are used to measure the concrete capacity to inhibit chloride attack. Many researchers carry out this test in a slice of concrete extracted from the central part of cylindrical specimens, discarding about 75% of the concrete used to mold the specimens. This fact generated the question: would it be possible to extract more slices from a same specimen without losing the confidence in the results? The main purpose of this work is to answer this question. Moreover, another aim of this study was to show the difference of chloride penetration between finished faces and the formwork surfaces of concrete beams and slabs. The results indicated that it is possible to use more slices of a single specimen for a chloride migration test. Moreover, it was demonstrated that there is a significant difference of chloride penetration between the finished surface and the formwork surface of the specimens.     

A dynamic model for marginal cost pricing of port infrastructures

ABSTRACT

A dynamic model for marginal cost pricing of port infrastructures links costs to system performance by combining a power-law function with time-dependent queueing analysis. Additionally, the model incorporates the marginal cost of capacity, including the effects of economies of scale. This allows the calculation of the marginal cost price under a dynamic framework. The model accounts for nonlinear behaviour of port demand, which is sensitive to price and service levels. The effects over time of cost and service levels on the port’s operational performance are quantified. The proposed model allows determining the optimal timing for capacity investment. The model is a starting point for the application of marginal cost pricing to ports. However, for practical application of such pricing method it is necessary to apply a system’s approach, as productivity and costs must be assessed at the terminal’s component level. This should allow the derivation of a marginal cost function at the terminal’s component level.     

Experience in judging controversial road projects

Abstract

Road construction of all kinds, especially of urban motorways, has in recent years acquired a very bad reputation in industrialized countries. Traffic engineers are, because of their attitude, not entirely without blame for this development. With their attention glued nearly hypnotically to dimensions and technical design, considerations about the meaning and function of the construction are very often neglected, all the more since the engineers might otherwise risk their own jobs. It is, however, becoming increasingly clear that the cause of the scepticism and uneasiness prevailing in the public is the lack of a comprehensive judgement. Using a concrete example, this paper describes how decision‐making can degenerate when such judgement is omitted. Using a second example, it is then demonstrated how such a comprehensive judgement can be integrated in decision‐making from the very beginning. Such an integration sets very high methodological and procedural standards and constructive aids are offered for this purpose. It is shown that, while the substantial findings of a comprehensive judgement should be logically consistent, plausible and up to the latest standard of knowledge, the nature and intelligibility of the presentation and the preparedness for a publicly presented explanation in the form of ‘after‐care’ are of much greater importance for decision‐making in the political sphere. This ‘after‐care’ should accordingly become an indispensable component of the decision‐making process.

All those involved should become aware of the fact that a ‘positive’ result of decision‐making in the field of road construction is not a priori defined as the construction of road and a ‘negative’ one as its prevention. The actual positive result is rather the creation of a consciousness of the problem on hand, which can serve as a basis on which a decision is taken in full realization of all its consequences.