Policy considerations for wetland wastewater treatment in the coastal zone: A case study for Louisiana

Two major environmental problems currently affecting the Louisiana coastal zone are a high rate of wetland loss and high levels of surface water pollution. The application of secondarily treated wastewater to wetlands can be a means of dealing with both of these problems. The benefits of wetland wastewater treatment include improved surface water quality, increased accretion rates to balance a high relative water level rise due mainly to subsidence, improved plant productivity and habitat quality, and decreased capital outlays for conventional engineering treatment systems. Wetland treatment systems can, therefore, be designed and operated to restore deteriorating wetlands. Hydrologically altered wetlands, which are common in the Louisiana coastal zone, are appropriate for receiving municipal and some types of industrial effluent. While the U.S. Environmental Protection Agency has determined wetland wastewater treatment is effective in treating municipal effluent, it has discouraged the use of natural wetlands for this purpose. At the same time, funds are being used for the construction of artificial wetlands to treat municipal effluent. In the Louisiana coastal zone, however, wetlands are deteriorating and disappearing due to hydrological alteration and a high rate of relative sea level rise. If no action is taken, these trends will continue. Effluent discharge to existing wetlands should be incorporated into a comprehensive management plan designed to increase sediment and nutrient input into subsiding wetlands in the Louisiana coastal zone, improve water quality, and result in more economical waste‐water treatment. The authors believe that the Louisiana example serves as a model for other coastal areas especially in light of projections of accelerated sea level rise.     

Dynamics of LRT growth: Karlsruhe since 1975

The public transport system of Karlsruhe, in particular its innovative services on jointly used heavy rail lines, has received substantial attention throughout the past 20 years. The discussion of the system and of its development has been rather limited in the past, mostly highlighting technical aspects. This paper provides an overview of the development, including the urban development, of the region and of the funding system. The ridership and financial development of the operator is documented in detail. Three case studies focus on the integration of the system development in the general political process of the region and demonstrate the limitations of the operator under its current ownership structures.     

Discipline in British merchant ships

This paper describes a model which may be used in the evaluation of the relative effectiveness of policies used in the areas of ship chartering and the switching of combined carriers between the dry-cargo market and the tanker market. The policies for chartering and market switiching are expressed in the form of ‘desired proportions’ of the fleet operating in a particular charter-mode or a particular market. Graphical illustration of this form of expression of policies can be easily understood, so that alternative policies can be designed with relative case. The effectiveness of a particular from of policy under various freight market conditions can be determined from the model, the use of which is illustrated by its application to the deployment of the fleet of an hypothetical shipping company. It is assumed that the feedback connection between the company's actions and the market-place is negligible.     

The construction and use of continuous autoregressive models for traffic indices

This article discusses the use of continuous autoregressive models to describe the behavior of traffic indices. From discretely sampled data, second-order differential equation models are constructed to represent dynamic traffic fluctuations as the response of a linear system to a stochastic forcing function. The results are compared to the more common M/G/∞ queueing model approach, and the analysis is demonstrated on time series of aircraft concentration in thirty-one enroute air traffic control sectors.     

A model of the travel to work limits of parents

This paper considers the length of time that parents are willing to travel to an existing or new job. Using data for over 12,000 parents it finds that many characteristics were associated with being less likely to be willing to travel to work for at least an hour (roundtrip). These include: being a women, those out of work, having children under 5, being a lone parent and using formal childcare. Professionals and associate professions were more willing to travel for longer periods. In terms of location, those in accessible small towns and rural areas were willing to travel more than those in larger urban areas and those in remote rural areas willing to travel most. Policy implications are also set out.     

美国拉臂钩技术发展及应用现状

我叫大卫·泽洛斯特里克,是斯泰勒工业有限公司的董事长.斯泰勒工业有限公司是美国第一家拉臂钩制造商,成立于1990年,座落于美国爱荷华州的加纳区.     

Further study on the ultimate strength analysis of spherical pressure hulls

From a comparative study it is concluded that current design rules for the spherical pressure hull of manned submersible need to be updated and unified. In this paper, a series of spherical pressure hulls are calculated by nonlinear FEM. Based on these numerical results, the influence of critical arch length and the relationship of ultimate strength with t/R and structural imperfection are studied. Finally, empirical formulae for the ultimate strength of the titanium alloy spherical pressure hull of deep manned submersible based on numerical computations are given. The formulae can be used as the core equations to update current design rules.     

Prediction of fatigue life and estimation of its reliability on the parts of an air suspension system

Air suspension systems have been implemented in various commercial vehicles, such as buses and special purpose trucks, because of the comfortable ride and easy height control. An evaluation of the durability of vehicle parts has been required for service life and safety starting in the early stages of design. The cyclic load applied to the vehicle can cause fatigue failure of parts, such as the suspension frame. This paper presents a method to predict the fatigue life of the suspension frame at the design stage of the air suspension system used in a heavy-duty vehicle. To estimate the fatigue life using the SN method, the Dynamic Stress Time History (DSTH) is necessary for the part of interest. DSTH can be obtained from the results of the flexible body dynamic analysis using the Belgian road simulation and the Modal Stress Recovery (MSR) method. Furthermore, the reliability of the predicted fatigue life can be evaluated by considering the variations in material properties. The probability and distribution of the expected life cycle can be obtained using experimental design with a minimum number of simulations. The advantage of using statistical methods to evaluate the life cycle is the ability to predict replacement time and the probability of failure of mass-produced parts. This paper proposes a rapid and simple method that can be effectively applied to the design of vehicle parts.     

Performance estimation model of a torque converter part I: Correlation between the internal flow field and energy loss coefficient

The objective of this paper is to improve the performance estimation model of the internal flow field of a torque converter. Compared with performance experiment results, the converter based on the one-dimensional model does not satisfy the performance requirements demanded in practice. Therefore, we need to develop more predictable and reliable performance estimation models. In order to obtain shape information on three-dimensional blade geometry, a process of reverse engineering conducts a torque converter assembly, impeller, turbine and stator. In addition, a CFD simulation including mesh generation and post-processing was carried out to extract equivalent parameters from the internal flow field. The internal flow field can be explained by analyze the correlation between a performance estimation model and CFD analysis. The equivalent performance model adopts the variation of energy loss coefficients for a given operating condition according to the application of a changing energy loss coefficient by the least mean squares method. The estimated equivalent model improves the agreement in performance between experiments and the theoretical model. This model can reduce the error to within about 3 percent. Furthermore, this procedure for predicted performance achieves eminence in the estimation of the capacity factor.     

Simulation of city bus performance based on actual urban driving cycle in China

This paper establishes the simulation model of a city bus on the basis of the EQ6110 bus prototype and its experimental data. According to the actual urban driving cycle, the fuel economy and the traction performance of the EQ6110 city bus have been simulated, and factors such as the driving cycle, the loss of power to engine accessories, the gear-shifting strategy, the fuel shut-off strategy of the engine, etc., which influence on the bus’s fuel economy, are also quantitatively analyzed. Some conclusions are drawn as follows: (1) driving cycles have a great influence on the fuel economy of a city bus; (2) under the typical urban driving cycle of the public bus in China, the engine fuel shut-off strategy can save about 1 to 1.5 percent of the fuel consumption; and (3) the optimized gear-shifting rules can save 6.7 percent of the fuel consumption. Experimental results verify that the fuel economy for the EQ6110 public bus is improved by 7.2 pecent over the actual Wuhan urban driving cycle of the current public bus in China.