A Study in Port Planning: The Example of Mina Zayed

The correct number of berths that a port should provide is solved by a model which minimizes the total port usage cost in terms of the costs of berth provision and the costs accruing to ships from time spent in the port. This model is then applied to Mina Zayed in the Arabian Gulf as an aid to future planning, and from different sets of cargo forecasts an optimal stategy is derived using a game-theoretic approach.     

Management of corals and coral ecosystems in the United States

Abstract

Corals and coral communities provide substantial societal benefits by virtue of their recreational and esthetic appeal, the habitat provided for commercially harvested fish and shellfish, the structural foundation provided for productive coastal ecosystems, and the market value of harvested coral specimens. Coral resources are subject to adverse effects from pollution, dredging, specimen collecting, anchor damage, commercial fishing, overharvesting, and activities related to offshore petroleum development. Management programs which protect coral resources in the United States comprise a patchwork of separate federal and state programs. They attempt to adapt broad regulatory authorities for parks, fisheries, offshore mineral resources, and other subjects for the purpose of coral conservation. These programs embody species‐specific, area‐specific, and generic approaches to coral management. This paper traces the evolution of U.S. coral management programs and comments on their respective strengths and weaknesses. Alternative approaches for strengthening management systems could include new coordinating committees, legislation, memoranda of agreement between involved agencies, and others.     

Efficiency and ecological characteristics of a VCR diesel engine

Compression ratio (CR) is a design parameter with highest influence on efficiency, emission and engine characteristics. In conventional internal combustion (IC) engines, the compression ratio is fixed and their performance is, therefore, a compromise between conflicting requirements. One fundamental problem is that drive units in the vehicles must successfully operate at variable speed and loads and in different ambient conditions. If a diesel engine has a fixed CR, a minimal value must be chosen that can achieve a reliable self-ignition when starting the engine in cold start conditions. In diesel engines, variable compression ratio (VCR) provides control of peak cylinder pressure, improves cold start ability and low load operation, enabling the multi-fuel capability, increase of fuel economy and reduction of emissions. By application of VCR and other mechanisms, the optimal regime fields are extended to the prime requirements: consumption, power, emission, noise, etc., and/or the possibility of the engine to operate with different fuels is extended. An experimental Diesel engine has been developed at the Faculty of Engineering, University of Kragujevac. The changes of CR are realized by changing the piston chamber diameter. Detailed engine tests were performed at the Laboratory for IC engines. Special attention has been given to decrease of fuel consumption and exhaust emissions. An optimal field of CR variation has been determined depending on the given objectives: minimal fuel consumption, minimal nitric oxides, and particulate matter emissions, etc.     

Effect of rear slant angle on vehicle crosswind stability simulation on a simplified car model

It is important to know the effect of the aerodynamic forces and moments on driving stability because it is responsible for the excitation and influences the response of the vehicle. The purpose of this paper is to study the effect of rear slant angle of a surface vehicle on crosswind sensitivity for stability analysis. The vehicle mathematical model used to conduct a dynamic simulation was based on a simple reduced order lateral dynamics of sideslip and yaw rate motion coupled with aerodynamics model. The intention here is to compare the effect of rear slant angles response to crosswind and to rank the crosswind sensitivity ratings. The aerodynamic loads are defined as the function of the aerodynamic derivatives from the static wind tunnel tests. Result shows a 20° rear slant angle demonstrates the highest rating of crosswind sensitivity, while zero degree slant exhibits the least.     

青藏线拉萨河特大桥主桥横梁设计

拉萨河特大桥主桥采用 (3 6+ 72 + 10 8+ 72 + 3 6)m五跨三拱连续梁钢管拱组合结构体系。通过对系杆拱桥不同部位横梁受力特点进行分析 ,采取相应的设计措施 ,为系杆拱桥的横梁设计提供一种合理的设计方法。     

Dynamics of inorganic nutrient species in the Bohai seawaters

Within the frame of a Sino-German Joint Research Program, two cruises of “R/V Dong Fang Hong 2” were carried out in September–October 1998 and April–May 1999, respectively, to understand the dynamics of nutrients in the Bohai. Nutrient species (NO₃⁻, NO₂⁻, NH₄⁺, PO₄³⁻ and SiO₃²⁻) are determined colorimetrically on board for five anchor and 30 grid stations. In situ incubation experiments are performed to determine planktonic nutrient uptake and benthic exchange flux. Nutrient concentrations display short-term variability and seasonal change in the Bohai, with higher levels in shallow coastal waters than in the Central Bohai. The influence of riverine discharge on nutrient levels can be seen from salinity isopleths, nutrient distribution and species ratios. Near-bottom (nb) waters have similar nutrient concentrations as to the surface waters in the Central Bohai, whereas stratification takes place in the Bohai Strait and North Yellow Sea. In situ incubation experiments provide evidence that the uptake ratio (i.e. N, P) by phytoplankton is proportional to the ratios among nutrient species in ambient waters. Based on the data of this study and previously publications, a preliminary estimate of nutrient budgets via riverine input and atmospheric deposition is established. The results indicate that atmospheric deposition gains importance over rivers in delivering nutrients into the Bohai and sustain the new production, following recent decrease in riverine inflow caused by drought periods in North China and damming practices. A historical review of nutrient data indicates that concentrations of nitrogen increase and phosphorus and silica decrease in the Central Bohai over last 40 years. This potentially has an important influence on the health of ecosystem in Bohai (e.g. food web and community structure), though further study is needed to examine the scenario in more detail.     

Long-term changes of inorganic nutrients in the Lagoon of Venice (Italy)

The paper aims at investigating the trends of the concentrations of dissolved inorganic nitrogen (DIN) and phosphorous in the Lagoon of Venice, Italy, in the last 35 years. The trend analysis of ammonia nitrogen, nitrate nitrogen and reactive phosphorus (RP) yielded rather different results. The decrease in ammonia nitrogen concentration, in particular, in the basin influenced by severe industrial discharges, is accurately described by a negative exponential model. The nitrate concentration did not show significant interannual trends, while wide seasonal variations have been detected. Reactive phosphorus concentration increased until the end of the 1970s at the stations close to the industrial area as well as in those influenced by river discharges and by sewages of the city of Venice. The sudden decrease that followed was most likely related with environmental policies, namely the improvement of wastewater purification treatments and the regulation of phosphorus use in detergents.     

隧道检测系统及其在韩国高速铁路隧道的应用

介绍韩国高速铁路隧道安装的健康监测系统,提出基于检测数据诊断隧道衬砌可能破损的新系统识别方法。引入逆算法,即根据已知的形变数据和混凝土衬砌恒载,估计破损的程度和位置。对以刚度均减和裂缝概念为基础建立的两种模型进行效果和优劣比较。对理想化的隧道结构进行数学分析,并用检测数据中常用的白噪声对模型进行适应性研究。结果表明,基于刚度均减方法的模型1对白噪声相对不敏感,而以裂缝概念为基础的模型2由于受刚度减小的影响很小,易于现场应用。     

Analysis of single pipeline pull-in procedure using small scale models

The structural elastic behaviour of steel pipelines during on-bottom pull-in procedure is investigated experimentally by using small scale models. Despite the lack of a sea-bed soil pipeline interaction effect in the model, it is possible to show that the unevenness of the sea-bed surface and the non-uniform distribution of friction forces can lead to large deflection bending stresses, higher than the numerical results yielded by standard software packages commonly used for design calculations. Due to foreseen difficulties in overcoming the drawbacks in practical and numerical procedures, the off-bottom pull-in operation arises as an attractive alternative even for shallow waters.