Trucking industry demand for urban shared use freight terminals

The issue of shared use urban freight facilities first received attention during the 1970s when it was observed that, while inter-urban freight movements were becoming increasingly efficient, there were significant diseconomies in the movement of freight via truck within urban areas. Early research suggested that shared urban freight facilities should be constructed so that trucking companies could consolidate smaller shipments into larger ones. In the past few years, the concept of Urban Ports has gained increasing attention, not just for carriers who need to load and unload freight, but to provide a place near the urban center for truckers to wait out peak traffic periods. In this paper, using recently developed survey data, we examine trucking company interest in such facilities by examining the results of an ordered probit demand model.     

Practicability study on the suitability of artificial,neural networks for the approximation of unknown steering torques

For steer-by-wire systems, the steering feedback must be generated artificially due to the system characteristics. Classical control concepts require operating-point driven optimisations as well as increased calibration efforts in order to adequately simulate the steering torque in all driving states. Artificial neural networks (ANNs) are an innovative control concept; they are capable of learning arbitrary non-linear correlations without complex knowledge of physical dependencies. The present study investigates the suitability of neural networks for approximating unknown steering torques. To ensure robust processing of arbitrary data, network training with a sufficient volume of training data is required, that represents the relation between the input and target values in a wide range. The data were recorded in the course of various test drives. In this research, a variety of network topologies were trained, analysed and evaluated. Though the fundamental suitability of ANNs for the present control task was demonstrated.     

The public administrator: Regulating for maritime transport efficiency

One role often fulfilled by public administrators is to regulate private enterprise in the public interest. The academic literature has not developed this area fully because public administration is not always tasked with this function. Nevertheless, when regulation forms a part of the responsibilities of the public administrator, it is among the most important. An essential foundation for effective regulation is a complete understanding of the implications and impact of regulatory action. In the absence of regulation, entrepreneurial awareness is applied in the private sector exclusively to satisfying consumer wants. In a regulated market, the entrepreneur’s focus is shifted toward regulatory imperatives. Regulation offers non-market opportunities for entrepreneurial innovation, as well as imposing new market constraints. This paper examines regulation of the maritime industry by the US federal government as an example.     

多种交通方式下的城市空间分配

从集计角度分析了运行多种交通方式的城市交通系统。利用目前已受关注的宏观基本图（简称MFD）,描述城市交通的整体特性。以旧金山某区为例,使用现有数据,通过仿真论证如何应用MFD监管真实交通网络。然后讨论了同一路网中不同交通方式间如何相互作用,以及如何将这些作用纳入包含多种交通方式路网的MFD。研究得到的两个主要结论是：1）证实了已有研究猜想——对市区拥挤区域限行,可提高包括被限行者在肉的所有出行者的机动性;2）公交方式提供专用道路空间可提高所有交通方式的可达性。     

Development of an intelligent CAE system for auto-body concept design

The concept design phase is a critical step in auto-body design, as it has a great effect on later design work. This paper describes the implementation of an auto-body structure design in the early stages of a new auto-body developing program. In order to reduce the long design period and analysis error that plagues traditional auto-body concept design, an intelligent CAE system has been successfully developed and implemented based on the UGS NX/API opening platform. This system, the so-called ACD-ICAE (Auto-body concept design-intelligent computer aided engineering) System that means concept design-intelligent computer aided engineering system, employs a fully parametrized template method to build the conceptual auto-body geometry model and FEM model quickly and easily. It also integrates auto-body modeling, analysis and optimization on only one CAD platform via a parametric variables database. Moreover, all parametric variables are shared and updated in different phases of the ACD-ICAE System. A wizard User Interface (UI) based on knowledge of auto-body engineering was developed and used in this system. The procedures implementing the functional diagram of the ACD-ICAE system are also provided. A typical example of a car body concept design with four doors shows that the ACD-ICAE system is efficient and accurate.     

Parameter matchin and optimization for a hydraulic power-assistant system

A hydraulic power-assist system is a hydraulic regeneration system that can significantly improve fuel economy when installed on a conventional bus operating in urban traffic. This paper presents a methodology for matching a new hydraulic power-assist system (HPA) to a conventional bus. The HPA and the conventional bus were modeled using the AMESim environment. The HPA was optimized using a simulation-based orthogonal design method with two indexes, the fuel economy and the acceleration performance. According to the simulation results, the volume of the accumulator was the primary factor affecting fuel economy, and the gear ratio of the transfer case was the primary factor influencing the acceleration performance. As a result, tradeoffs between the two indexes are required for a practical operational scenario. Experimental results demonstrated that the optimal HPA installed on a conventional bus was able to satisfy the acceleration performance requirement of the vehicle and also reduced fuel consumption by 25 percent.     

Numerical prediction of the modal response of flexible cylinders in cross-flow with a current dependent form of damping

A quadratic eigenvalue problem (QEP) was posed in order to study the dynamics of flexible cylinders in cross-flow, simulating slender offshore structures such as risers, catenaries or tendons. The Euler–Bernoulli equation was used to model the structure assuming a fluid loading model, and yielding a quadratic eigenvalue problem that included a form of damping dependent not only on the structural damping itself, but also on the free stream velocity and the fluid force coefficients. We solved the QEP using the finite element method. We also derived a simplified analytical solution in this work for comparison with the QEP, however this solution does not consider changes in tension along the length of the cylinder as the QEP does. In our study, the QEP solutions were first validated against the simplified analytical solution, and also against a well-known experimental dataset obtained in 2003, in which a flexible circular cylinder model was used to model the dynamics of a riser undergoing multi-mode vortex-induced vibrations.     

A Modeling Framework for Bus Rapid Transit Operations Evaluation and Service Planning

Abstract

In this paper, we present a dynamic traffic assignment-simulation modeling framework (DYNASMART-P) to support the evaluation and planning of Bus Rapid Transit (BRT) services in urban transportation networks. The model represents the different characteristics associated with BRT operations such as: exclusive right-of-way lanes, limited-stop service, signal prioritization at congested intersections, and enhanced bus stops to reduce passenger boarding times. A set of simulation experiments is conducted using the model to study the impact of introducing a hypothetical BRT service in the Knoxville area in the State of Tennessee. In these experiments, the different operational characteristics of BRT are evaluated in terms of potential impact on transit ridership and on the interacting auto traffic. The results illustrate the advantages of BRT for increasing transit ridership and improving overall system performance.     

Optimization of Fare Structure and Service Frequency for Maximum Profitability of Transit Systems

Abstract

Providing efficient public transportation has been recognized as a potential way of alleviating congestion, improving mobility, mitigating air pollution, and reducing energy consumption. Many people use public transportation systems for their daily commute, while others use different transportation modes (e.g. cars, taxis, carpools, etc.). Inexpensive fares with good transit service encourages ridership, and the resulting revenue may be used to provide better service. Optimization of transit service frequency and its associated fare structure is desirable in order to increase revenue at reasonable transit operating expenditure. The objective of the study reported here is to maximize profit subject to service capacity constraint, while elastic demand is considered. The solution methodology is developed and applied to solve the profit maximization problem in a case study based on Newark, NJ, USA. Numerical results, including optimal solutions and sensitivity analyses, are presented. It is found that an optimal temporal headway and differential fare structure that maximizes total profit for the studied subway system can be efficiently solved.