Truck backhauling on two terminal networks

Truck backhauling reduces empty truck-miles by having drivers haul loads on trips back to their home terminal. This paper 1) examines the impact on backhauling opportunities of terminal locations and directional imbalances in the flow of freight from the terminals, and 2) develops a method for determining which truckloads should be backhauled. Backhauling is studied for two terminals sending full truckloads to many customers under steady-state conditions. This research develops two backhauling models. The first is a continuous model that makes simplifying assumptions about customer locations and travel distances. It results in formulae showing that 1) savings from backhauling increase at a decreasing rate as the directional flow of freight between two terminals becomes more balanced and 2) backhauling is an important, but often ignored, factor in terminal (e.g. trucking terminal, warehouse, or plant) location and supplier selection decisions. The second model is a more general discrete model that determines which loads should be backhauled to minimize empty truck-miles.     

The drag on an airplane taking off from a floating runway

The motions of an infinitely long, two-dimensional runway subjected to the dynamic moving load imposed by an airplane taking off are investigated. The runway is assumed to be floating in an inviscid fluid and is initially at equilibrium before the plane takes off. The deformation of the runway resulting from the take-off is wave-like and moves in the same direction as the plane. The maximum drag occurs when the plane catches up with the first wave. Three different runway configurations were considered: a baseline and ones which were ten and one hundred times more flexible than the baseline. For these runways, the added drag to the aircraft was very small, ranging from 1% for the stiffest to 10% for the most flexible runway.     

High-speed rail service: Issues for the Detroit-Chicago corridor

Several issues concerning the implementation and operation of high-speed rail service in the Detroit-Chicago corridor are identified and discussed in this paper. The primary concern is whether such a service is likely to be attractive enough to induce the private sector to provide it. While the outlook for private operation appears pessimistic, consideration of a broader range of potential benefits (e.g., direct and indirect employment) may justify public involvement and investment.     

Optimal transit subsidy policy

The basic justification for transit subsidy is that such a subsidy is necessary, given substantial economies of scale, in order to permit fares to be set at a level which will result in reasonably efficient use of the service. Efficiency is not, however, merely a matter of the level of the fares but even more of the fare structure and pattern. Major changes in fare patterns are needed to permit reasonable efficiency of utilization to be attained, and full advantage derived from subsidy. Differentiation according to time and direction, as well as the distance of travel, is required. Ideally, competing modes such as the private automobile should be priced at marginal cost, differentially by time and place, and the subsidy should be derived from taxes on land values in the areas where such values are enhanced by the presence of transit service at low fares. In the absence of such conditions, fares should differ from marginal cost in ways that take into account the impacts of transit fare variations on auto traffic and congestion, and on the subsidy requirements and the adverse impacts of the taxes imposed to finance the subsidy.In addition to these economic efficiency considerations there may be added considerations of distributional impact and political acceptability, which may modify the optimal solution somewhat but should not greatly change the main outlines of the patterns to be recommended.     

An experimental testbed for mobile offshore base control concepts

 The concept of a mobile offshore base (MOB) reflects the need to stage and support military and humanitarian operations anywhere in the world. A MOB is a self-propelled, modular, floating platform that can be assembled into lengths of up to 2 km, as required, to provide logistic support to US military operations where fixed bases are not available or adequate. It accommodates the take-off and landing of C17 aircraft, and can be used for storage, as well as to send resources quickly to shore. In most concepts, the structure is made of three to five modules, which have to perform long-term station-keeping in the presence of winds, waves, and currents. This is usually referred to as dynamic positioning (DP). In the MOB, the alignment is maintained through the use of thrusters, connectors, or a combination of both. In this paper, we consider the real-time control of scaled models of a MOB. The modules are built at the 1 : 150 scale, and are kept aligned by rotating thrusters under a hierarchical hybrid control scheme. This paper describes a physical testbed developed at the University of California, Berkeley, under a grant from the US Office of Naval Research, for the purpose of evaluating competing MOB control concepts. Received: June 4, 2002 / Accepted: October 30, 2002 Acknowledgments. This material is based on work supported by the MOB Program of the US Office of Naval Research under grant N00014-98-1-0744. The authors would like to thank the Link Foundation for its support. Many thanks go to Stephen Spry for his experimental work. The photographs are courtesy of Bill Stone, Gerald Stone, and Jay Sullivan of the PATH Publications staff. Address correspondence to: A.R. Girard (e-mail: anouck@eecs.berkeley.edu)     

Authentic assessment in seafarer education: using literature review to investigate its validity and reliability through rubrics

With the Standards of Training, Certification and Watchkeeping Convention 1995 (STCW’95) moving seafarer training towards outcome-based education (OBE), emphasis has shifted to assessment practices that will allow seafarer students to demonstrate their ability to perform workplace tasks at standards described in the STCW Code. This paper argues that authentic assessment comprising of performance-based tasks applied in real-world and meaningful contexts can provide a holistic approach to competence assessment for seafarers. But, authentic assessment can capture essential aspects of workplace tasks and result in consistency of student performance in different contexts only if they are valid and reliable. Rubrics as assessment tools are known to increase validity and reliability of assessments; however, it can do so only if different aspects of its own validity and reliability have been addressed. A literature review undertaken for this paper has uncovered an absence of academic investigation and empirical study on the different aspects of validity and reliability of authentic assessment through assessment rubrics. Moreover, there exists an even greater absence of global research on authentic assessment in the area of seafarer training. Through an investigation of authentic assessment, this research has uncovered the importance of using valid and reliable rubrics in order to improve not only the assessment process but also the tools and methods used to support the valid, reliable, and authentic assessment of outcomes achieved in the learning process. Future research aims to offer insights into improving the validity and reliability of rubrics and to empirically investigate how they can be used in authentic assessment within the confines of the STCW Code, in particular, to improve seafarer training practices, student engagement, resulting learning outcomes, and employer and regulator satisfaction with the attainment of the standards stipulated in the STCW Code to produce an evidence of competence.     

A network equilibrium approach for modelling activity-travel pattern scheduling problems in multi-modal transit networks with uncertainty

An understanding of the interaction between individuals’ activities and travel choice behaviour plays an important role in long-term transit service planning. In this paper, an activity-based network equilibrium model for scheduling daily activity-travel patterns (DATPs) in multi-modal transit networks under uncertainty is presented. In the proposed model, the DATP choice problem is transformed into a static traffic assignment problem by constructing a new super-network platform. With the use of the new super-network platform, individuals’ activity and travel choices such as time and space coordination, activity location, activity sequence and duration, and route/mode choices, can be simultaneously considered. In order to capture the stochastic characteristics of different activities, activity utilities are assumed in this study to be time-dependent and stochastic in relation to the activity types. A concept of DATP budget utility is proposed for modelling the uncertainty of activity utility. An efficient solution algorithm without prior enumeration of DATPs is developed for solving the DATP scheduling problem in multi-modal transit networks. Numerical examples are used to illustrate the application of the proposed model and the solution algorithm.     

Approaches and Techniques for Modelling CO2 Emissions from Road Transport

Abstract

Transport accounts for around a quarter of CO₂ emissions globally. Transport modelling provides a useful means to explore the dynamics, scale and magnitude of transport-related emissions. This paper explores the modelling tools available for analysing the emissions of CO₂ from transport. Covering a range of techniques from transport microsimulation to global techno-economic models, this review provides insights into the various advantages and shortcomings of these tools. The paper also examines the value of having a broad range of perspectives for analysing emissions from transport. The paper concludes by suggesting that the broad range of models creates a rich environment for exploring a spectrum of policy questions around the emissions from transport, and the potential for combining modelling approaches further enhances the understanding that can be attained.     

基于GIS的机动车排放模型及其应用

为解决大城市的空气污染问题,必须提出新的策略遏制快速城市化地区空气污染物的增加。MEASURE模型是服务于城市和区域评价的机动车排放评估系统,可为研究者和规划师提供一种评估机动车减排策略的新方法。以佐治亚州亚特兰大市一块面积为100km2的研究区为例,探讨了该模型在机动车排放实证研究中的应用。结果表明,该模型可准确定位各交通小区和各级道路上的污染排放,实现污染排放的空间分析,加深人们对机动车排放的理解,为未来城镇土地利用总体规划和交通规划提供科学参考。     

海上风机导管架基础钢管桩稳桩平台结构强度分析

海上风机导管架基础钢管桩沉桩施工通常需要专门的稳桩平台辅助进行。结合作业工艺要求、海洋环境条件和相关规范,对钢管桩稳桩平台进行结构设计。采用SESAM软件和ANSYS Workbench软件分别对稳桩平台整体结构强度和吊耳局部结构强度进行计算分析,并根据规范对计算结果进行评估。结果表明,稳桩平台整体结构强度和吊耳局部结构强度均满足规范要求。该计算分析方法同样适用于海上升压站导管架基础、海上单桩基础稳桩平台或其他类似导管架结构的强度评估。