基于动态规划算法的舰空导弹火力分配模型研究

简要介绍火力最优分配问题中4个基本要素,并在此基础上,给出了舰空导弹火力分配模型数学表达式及其约束条件。运用动态规划算法,以对目标的最大毁伤值为目标函数,给出了动态规划的递推公式,并举例予以说明。     

海水静压力差在潜艇鱼雷发射装置中的应用

通过分析不同深度条件下潜艇发射鱼雷时的能量消耗,提出利用海水静压力差作为潜艇大深度发射鱼雷的一种原动力补充能量,为潜艇水下大深度发射鱼雷能量储备与使用探索出一条新的思路。     

一种DES算法的FPGA快速实现方法

该文阐述了密码算法FPGA快速实现的一种方法,利用Mentor Graphics的Catapult C综合工具,完成了DES算法从计算机仿真到硬件实现的全过程,代替了传统FPGA实现处理过程,可大大缩短项日的开发周期和降低作难度。     

基于xPC目标的无人机飞控半实物仿真技术研究与应用

文章在掌握xPC Target工具技术的基础上,以实验室项目为背景,在xPC Target环境下,使用MATLAB的无人机硬件在回路仿真技术,将建模理论、飞行控制技术、计算机仿真技术、xPC目标硬件接口技术、硬件在回路仿真平台构建技术等融于一体,实现了无人机飞行控制系统开发和测试平台的统一。最后在半物理仿真条件下对设计进行了仿真测试,验证了仿真平台的可行性。     

基于分数阶傅里叶变换的线性调频信号检测算法

针对复杂噪声背景下线性调频信号检测问题,利用分数阶Fourier变换具有解除时频耦合和信号在分数阶Fourier域呈现能量谱的高度聚集的特性,得出一种基于分数阶Fourier变换的信号检测算法,并将算法用于高斯白噪声和色噪声背景中信号检测。仿真结果表明,该算法对高斯、非高斯色噪声中的线性调频信号检测均有良好的检测性能。     

基于激光陀螺捷联惯导技术的火炮身管指向系统设计

提出了一种基于激光陀螺捷联惯导技术的火炮身管指向系统的设计方案,采用捷联惯导技术、DSP和FPGA技术、自主标定和误差自动补偿等技术实现了系统的组成和功能,并对系统精度进行了分析。     

基于遗传算法的目标设定式电磁扫雷具结构研究

从考察目标设定式电磁扫雷具模拟受保护舰船磁场效果出发,利用遗传算法良好的全局搜索能力,得出现有目标设定式电磁扫雷具在模拟上有保护舰船磁场上的不足及原因,提出一种在不改变目标设定式电磁扫雷具单个磁体结构的基础上,通过改变磁体水中状态提高模拟效果的办法,通过仿真试验,结果表明该方法效果良好。     

激光陀螺导航系统硬件平台的设计

为减小硬件平台的体积,提高系统的集成度,在激光陀螺导航系统硬件平台设计时,对硬件平台的核心部分采用内嵌处理器硬核的FPGA进行导航数据的实时解算,并在FPGA的内部逻辑中集成IP核来实现数据采集、接口通信和显示控制等功能。     

两种直接波浪能转换系统性能的比较:阿基米德波浪摆和波能浮筒(英文)

Many wave energy conversion devices have not been well received. The main reasons are that they are too complicated and not economical. However, in the last two decades direct conversion systems have drawn the attention of researchers to their widely distributed energy source due to their simple structure and low cost. The most well-known direct conversion systems presently in use include the Archimedes Wave Swing (AWS) and Power Buoy (PB). In this paper, these two systems were simulated in the same conditions and their behaviors were studied in different wave conditions. In order to verify the simulations, results of the generator of the finite element computations were followed. An attempt was made to determine the merits and drawbacks of each method under different wave conditions by comparing the performance of the two systems. The wave conditions suitable for each system were specified.     

双通线加热的热力学及实验分析(英文)

The present investigation deals with process analysis of oxy-acetylene flame assisted double pass line heating for varying plate thickness. oxy-acetylene flame as the heat source for multi pass line heating to achieve 3-D bending of plates with varying thicknesses was studied. The oxy-acetylene flame was modeled as the moving heat source in the FEM analysis. The transient thermal histories were predicted taking into account the temperature dependent thermo-mechanical properties. A comparative study between single pass and double pass line heating residual deformation was also carried out. The temperature distribution and residual deformations predicted by the numerical model developed in the present work compared fairly well with those of the experimental ones.